Head Technical Electrical Engineer
Beijing Arabic Construction company BEC Arabic
Total years of experience :24 years, 9 Months
• Preparing preliminary reports and designs for all electrical systems.
• Developing electrical designs for all subsequent stages of project design, including detailed design, tendering stage, and executive plan stage.
• Compiling all required engineering reports such as design reports, accounting reports, value engineering reports, and others.
• Compiling all tender documents related to electrical systems such as quantity schedules, specifications, and other supplementary tender documents.
• Reviewing and studying complete tender documents, raising any questions or reservations during the tender evaluation period to be addressed by the designer.
• Providing all contractor documents to the client for proper evaluation and study of the contractors proposal, such as the contractors experience record and legal documents.
• After awarding the tender to the contractor, the implementation phase begins, where the contractor starts preparing material approval samples for execution and develops shop drawings to be approved.
• Preparing the project for interim and final handovers and delivering and operating the systems.
• Preparing as-built drawings for the executed electrical systems.
1- Provide Project Development Support
2- Assist in the Development of Project Scope and Key Performance I
3- Assist in the Development of Project Structure
4- Assist in the Acquisition of Appropriate Technology and Technica
5- Assist Owners to Procure the Services of Turnkey, EPC or Study C
6- Provide Project Management Support
7- Monitor the Quality of Project Engineering and follow through Co
8- Assist in the Construction Management of the Project
9- Monitor the Project Cost and Schedule and follow through Correct
10- Assist in the Start-up and Commissioning of the Project
11- Prepare Operating and Maintenance Procedures
12- Carry out Operational Scenario and Risk Assessment
13- Carry out the Training of Client Personnel For all electrical s
14- Continually improved methods and procedures for processes, meas
15- Carried out thorough fault finding for electrical equipment pro
16- Governed electrical standards and inputs, ensuring strict compl
17- Coordinated with vendors to identify and procure appropriate eq
18- Prepared technical specifications for distribution boards with
19- Calculated loads Schedule for loads to size sizing wire and ci
20- You oversee electrical projects from their design to implementa
21- check the shop drawing and desi and give the approved for mate
• Provide project development support and assist in the development of project scope and key performance parameters.
• Assist in the development of project structure and the acquisition of appropriate technology.
• Help owners to procure the services of Turnkey, EPC and provide Project Management support.
• Monitor the quality of Project Engineering and assist in the construction management of the project.
• Check the project cost and schedule and carry out operational scenario and risk assessment.
• Lead the start-up and commissioning of the project and prepare operating and maintenance procedures.
• Carry out the training of client personnel and continually improve methods and procedures for processes.
• Conduct thorough fault finding for electrical equipment and govern electrical standards ensuring strict compliance.
• Determine the groundwork of a project and supervise electrical projects from their design to implementation.
• Define the project scope, minimize risks, evaluate budgets, conduct feasibility and site studies and analyze technologies and their suitability to a project.
• Present assistance and address related environmental concerns in addition to protecting the owners interests by ensuring that the technical and build contractors are adhering sufficiently to the project specification.
design, develop, test, and supervise the manufacture of electrical equipment, such as electric
motors, radar and navigation systems, communications systems, or power generation
equipment. also design the electrical systems of low current system as fire alarm, fire
fighting, CCTV and prepper Budget
1- Work to Construction 388 villa at a value of 400 million Riyals, which includes the
electrical system and low current system and control the material, and make order
2- Work to Construction infra striation value of 400 million Riyals, which includes the
medium voltage (( cable- substation and electrical kilo meter )) and low voltage and the
telecom pipe
3- Work to Construction infra striation and 6 building value of 80 million Riyals, which
includes the medium voltage (( cable- substation and electrical kilo meter )), low voltage, low
current (( fire alarm -fire fighting - cisco system telephone - IP Data - video conference -
Public address - projector system ))
4- Verified on time deliverables within budget parameters through effective management of
project milestones.
5- Coordinated materials delivery and organization to maintain smooth flow of work.
6- Electrical acceptance testing of completed hardware, including continuity and
highpotential isolation testing.
7- Evaluated installed electrical equipment and systems to isolate faults and implement
corrective action
8- Checked work quality and compliance with design specifications.
9- Negotiated schedules, work plans and payment structures with subcontractors.
10- Oversaw teams of electrical contractors focused on installing \[ low current -low voltage -
medium voltage-public address - video conference -audio video system - networks\]
systems
11- Read and interpreted blueprints, diagrams and schematics to correctly coordinate work.
12- Prepared technical documentation for operation, troubleshooting and maintenance of
industrial system
13- Inspected completed installations to observe operations and verify conformance to
design and specifications.
14- Identified specific cables, connectors, fuses, circuit breakers and other electrical devices
required for installation of monitoring systems and fire detection systems.
15- Performed maintenance procedures and repairs on existing electrical products and
systems.
16- Conducted field surveys and studied maps and diagrams to identify and correct power
system problem including \[Lighting & power & low current\] and \[IP\] problems.
17- Supervised construction and precommissioning of electrical rooms, substations, and
service buildings for \[Tamia\] project and tabuk university
18- Proposed electrical product and system modifications to improve quality and efficiency .
19- Used formulae to calculate current loads and short circuit currents.
20- Monitored manufacturing operations of electrical devices for compliance with safety
protocols.
21- Validated small product and subsystem performance by performing analysis, simulation
and labora testing.
22- Mentored junior engineers and new hires to better improve competency and efficiency of
all staff.
23- Created electrical schematics using AutoCAD Electrical Toolset.
24- Spearheaded tendering and negotiation process for critical products and services to
reduce costs an early contractor involvement.
25- Determined most effective approaches to new projects by reading and analyzing
blueprints, shop drawing .
26- Created project prototypes and models using three-dimensional design software.
Implemented cuttingedge
27- processes and safety practices to reduce electrical construction hazards.
28- Communicated with engineers and customers to discuss potential and existing
engineering projects
29- Confirme system and component capabilities by designing testing methods and testing
properti
30- functional development teams to design and manufacture new \[video conference - RMU
- LED\] products.
• Designed the electrical systems of low current system as fire alarm, firefighting and CCTV.
• Collaborated with clients, architects, engineers, contractors and subconsultants on projects with budgets up to 200, 000, 000 S.R.
• Verified on time deliverables within budget parameters through effective management of project milestones.
• Conducted electrical acceptance testing of completed hardware, including continuity and high potential isolation.
• Evaluated installed electrical equipment and systems to isolate faults and implement corrective action.
• Oversaw teams of electrical contractors focused on installing \[ low current -low voltage - medium voltage-public address - video conference -audio video system - networks\] systems.
• Read and interpreted blueprints, diagrams and schematics to correctly coordinate work..
• Inspected completed installations to observe operations and verify conformance to design and specifications.
• Identified specific cables, connectors, fuses, circuit breakers and other electrical devices required for installation of monitoring systems and fire detection systems.
• Conducted field surveys and studied maps and diagrams to identify and correct power system problem including \[Lighting & power & low current\] and \[IP\] problems.
• Monitored manufacturing operations of electrical devices for compliance with safety protocols.
• Validated small product and subsystem performance by performing analysis and simulation.
• Created electrical schematics using AutoCAD toolset and used formulae to calculate current loads and short circuit currents.
• Spearheaded tendering and negotiation process for critical products and services to reduce costs.
• Managed functional development teams to design and manufacture new \[video conference - RMU - LED\] products.
• Interacted with project leaders and stakeholders to define requirements and generate development documents.
• Assisted in development of \[Medium - low - low current\] testing systems, including automated \[RM Transnormal - ATS - GENERATOR\] equipment.
Reviewed specifications, drawings and project manuals.
Designed concepts that included module placements, conduit routing and inverter locations.
Implemented and approved design control procedures for electrical development in accordance
with regulatory guidelines.
Initiated project management knowledge study and subsequently standardized project
management practices.
Applied appropriate engineering methods to all project discipline standards.
• Developed, tested, and supervised the manufacture of electrical systems and electrical equipment, such as electric motors, radar and navigation systems, communications systems and power generation equipment.
• Designed concepts that included module placements, conduit routing and inverter locations.
• Implemented and approved design control procedures in accordance with regulatory guidelines.
• Initiated project management knowledge study and subsequently standardized project management practices.
• Determined most effective approaches to new projects by reading and analyzing blueprints and shop drawing.
• Created project prototypes and models using three-dimensional design software and implemented cutting-edge.
• Communicated with engineers and customers to discuss potential and existing engineering projects.
• Confirmed system and component capabilities by designing testing methods and testing properties.
• Planned and evaluated results of analysis, modeling and experiments and maintained lighting and fixtures.
• Scheduled and undertook periodic maintenance on all electrical installations, components, and equipment.
• Completed functional analysis and root cause tests in addition to planning all project resources and budgets.
• Coordinated activities between cross-functional teams, including designs, tests and building activities.
Microsoft system center - 2018 MCITP Microsoft Certified IT Professional - 2016 CompTIA Security+ - -2015 CompTIA A+ - 2015 CCNA Cisco Certified Network Associate - 2014