حسن sarfraz

o Highly proficient in interpretations of all kinds of drawings like piping drawings i.e. GAD, P&ID and Isometric, Mechanical Equipment drawings.
o Review of Method of statements and other Work procedures for client approval.
o Line checking prior to hydro testing to verify piping erection as per isometric drawing, flanges rating, valve direction and orientation, type of valves, pipe supports and internal cleaning of piping to verify that interior is clean of foreign materials.
o Generate punch lists and close out of punch items after completions accordance to (SAIC-A- 2010).
o Inspection of Valves Installation.
o Check flow direction arrows on valves; verify that the properly identified valves are installed in accordance with the flow diagram. Ensure that pipe supports hangers and guides have been installed in accordance with the piping drawings and the pipe support details
o Modification of line routing as per site condition & incorporating in the Piping Plan.
o All permanent flange joints were inspected; gasket material verified & properly torque.
o Preparing and review all test package and timely interact with contractors for the performance of work.
o Inspection of pressure test (Hydro) according to piping class, test limits accordance to (SATIP-A- 004-02).
o Interacting with other department like planning department, QA/QC department, Design department, Warehouse.
o Guiding the bolt torqueing and alignment of flanged joints with correct gasket, stud-bolts and nuts as per drawings and project specification.
o Coordinate with Field Engineers for preparing As built Drawings and clearance
o Coordinating all documentation and correspondences with client.
o Inspect fit up prior to full welding & ensure that only qualified welders are allowed to perform in accordance with the approved WPS.
o Perform visual Inspection on completed welds for the occurrence of Porosity, cracks, Undercuts, spatter & arc strike prior to NDT.
o Daily Activity reports.
o Ensuring implementation of Quality Control Plan, Procedure, and Inspection & Test Plan.
o Co-ordination of all testing, punch clearance and rectification activities leading a Team of pipe fitters, welders and mechanical technicians.
o Review and evaluate plan, isometric and P&ID’s for monitoring and supervising, Pre-
Commissioning activities.
o Verification of closed punch items and conduct walk through for each completed piping system prior to Mechanical Acceptance (Mechanical Completion).

o Conduct in process inspection (fit-up check & visual inspection on completed weld)
o To assist the Site Superintendent and coordinate the Supervisors activity, carry out and implement the QA/QC program, arrange and conduct meetings under the Site Superintendent direction..
o Check and assure that all joints are exposed for examination during pressure test.
Check vents are open when filling and draining lines. Monitoring and inspecting the erection works by the subcontractors including piping, welding and insulation and also Co-ordination with client and subcontractors for the quality issues and issuing NCR’s when non-conformity activities were noted by the sub contractors.
o Inspect fit up prior to full welding & ensure that only qualified welders are allowed to perform in accordance with the approved WPS
o Monitor piping erection at site & perform all related inspection during the fabrication &erection.
o Make sure the trenches are proper barricaded with tapes &barriers.
o Inspection of adhesive materials storage in a proper enclosure.
o Inspection of joint preparation as per vendor Recommendations.
o Make sure the bottom of the trench shall be dry continuous smooth & free from pebbles or rocks.
o Inspection of proper tools & tackles for the RTR joints like pipe shavers, heating blankets band clamps etc.
o Make sure the pipe location & elevation shall be marked by the surveyor.
o Sound knowledge in process piping, hydro testing & pneumatic test.
o Knowledge of fire and safety procedures

o Able to read P&ID, isometric drawing, welding symbols, familiarized in codes/standards and able to identify material specification & it equivalent composition.
o Manage the prefabrication works by the contractors including the inspection of incoming materials, material handling, heat number transfer, Fit up, welding activities, post weld heat treatment of welding jobs, hardness test, reinforced pad test, orientation and flush grinding of orifice flanges.
o To assist the Site Superintendent and coordinate the Supervisors activity, carry out and implement the QA/QC program, arrange and conduct meetings under the Site Superintendent direction.
o Arrange meeting to ensure completion of category “A” punch items, prior to hydro testing. Follow-up with contractor’s to complete all the “B” category punch items as per agreed punch list & according to the project schedule.
o Inspecting the incoming materials for damages dimensions & corrosions ensure that MTC is available according to the requirement. Ensure satisfactory identification of materials, proper protection of piping &fittings.
o Monitor piping erection at site & perform all related inspection during the fabrication &erection.
o Inspect fit up prior to full welding & ensure that only qualified welders are allowed to perform in accordance with the approved WPS.
o Perform visual Inspection on completed welds for the occurrence of Porosity, cracks, Undercuts, spatter & arc strike prior to NDT.
o Daily Activity reports.
o Ensuring implementation of Quality Control Plan, Procedure, and Inspection & Test Plan.
o Co-ordination of all testing, punch clearance and rectification activities leading a Team of pipe fitters, welders and mechanical technicians.
o Review and evaluate plan, isometric and P&ID’s for monitoring and supervising, Pre-
Commissioning activities.
o Verification of closed punch items and conduct walk through for each completed piping system prior to Mechanical Acceptance (Mechanical Completion).

o Highly proficient in interpretations of all kinds of drawings like piping drawings i.e. GAD, P&ID and Isometric, Mechanical Equipment drawings.
o Review of Method of statements and other Work procedures for client approval.
o Line checking prior to hydro testing to verify piping erection as per isometric drawing, flanges rating, valve direction and orientation, type of valves, pipe supports and internal cleaning of piping to verify that interior is clean of foreign materials.
o Generate punch lists and close out of punch items after completions accordance to (SAIC-A- 2010).
o Inspection of Valves Installation.
o Check flow direction arrows on valves; verify that the properly identified valves are installed in accordance with the flow diagram. Ensure that pipe supports hangers and guides have been installed in accordance with the piping drawings and the pipe support details
o Modification of line routing as per site condition & incorporating in the Piping Plan.
o All permanent flange joints were inspected; gasket material verified & properly torque.
o Preparing and review all test package and timely interact with contractors for the performance of work.
o Inspection of pressure test (Hydro) according to piping class, test limits accordance to (SATIP-A- 004-02).
o Interacting with other department like planning department, QA/QC department, Design department, Warehouse.
o Guiding the bolt torqueing and alignment of flanged joints with correct gasket, stud-bolts and nuts as per drawings and project specification.
o Coordinate with Field Engineers for preparing As built Drawings and clearance
o Coordinating all documentation and correspondences with client.

o Inspect piping just before erection to verify that interior is clear of foreign materials. Check edge preparation and fit-ups to verify that areas to be welded are free of contaminants and that fit-up is within tolerance. Ensure that the work is carried out as per standards, drawings, maintaining quality.
o Conduct in process inspection (fit-up check & visual inspection on completed weld)
o To assist the Site Superintendent and coordinate the Supervisors activity, carry out and implement the QA/QC program, arrange and conduct meetings under the Site Superintendent direction..
o Check and assure that all joints are exposed for examination during pressure test.
Check vents are open when filling and draining lines. Monitoring and inspecting the erection works by the subcontractors including piping, welding and insulation and also Co-ordination with client and subcontractors for the quality issues and issuing NCR’s when non-conformity activities were noted by the sub contractors.
o Inspect fit up prior to full welding & ensure that only qualified welders are allowed to perform in accordance with the approved WPS.
o Perform visual Inspection on completed welds for the occurrence of Porosity, cracks, Undercuts, spatter & arc strike prior to NDT.
o Daily Activity reports.
o Ensuring implementation of Quality Control Plan, Procedure, and Inspection & Test Plan.
o Co-ordination of all testing, punch clearance and rectification activities leading a Team of pipe fitters, welders and mechanical technicians.
o Review and evaluate plan, isometric and P&ID’s for monitoring and supervising, Pre-
Commissioning activities.
o Verification of closed punch items and conduct walk through for each completed piping system prior to Mechanical Acceptance (Mechanical Completion).

o Interacting with other department like planning department, QA/QC department, Design department, Warehouse.
o Guiding the bolt torqueing and alignment of flanged joints with correct gasket, stud-bolts and nuts as per drawings and project specification.
o Coordinate with Field Engineers for preparing As built Drawings and clearance
o Coordinating all documentation and correspondences with client.
o Inspecting the incoming materials for damages dimensions & corrosions ensure that MTC is available according to the requirement. Ensure satisfactory identification of materials, proper protection of piping &fittings.
o Monitor piping erection at site & perform all related inspection during the fabrication &erection.
o Make sure the trenches are proper barricaded with tapes &barriers.
o Inspection of adhesive materials storage in a proper enclosure.
o Inspection of joint preparation as per vendor Recommendations.
o Make sure the bottom of the trench shall be dry continuous smooth & free from pebbles or rocks.
o Inspection of proper tools & tackles for the RTR joints like pipe shavers, heating blankets band clamps etc.
o Make sure the pipe location & elevation shall be marked by the surveyor.
o Sound knowledge in process piping, hydro testing & pneumatic test.
o Knowledge of fire and safety procedures.

o Fully involved in all piping both above ground and underground activities.
o Inspect piping just before erection to verify that interior is clear of foreign materials. Check edge preparation and fit-ups to verify that areas to be welded are free of contaminants and that fit-up is within tolerance. Ensure that the work is carried out as per standards, drawings, maintaining quality.
o Conduct in process inspection (fit-up check & visual inspection on completed weld)
o To assist the Site Superintendent and coordinate the Supervisors activity, carry out and implement the QA/QC program, arrange and conduct meetings under the Site Superintendent direction..
o Check and assure that all joints are exposed for examination during pressure test.
Check vents are open when filling and draining lines. Monitoring and inspecting the erection works by the subcontractors including piping, welding and insulation and also Co-ordination with client and subcontractors for the quality issues and issuing NCR’s when non-conformity activities were noted by the sub contractors.
o Inspect fit up prior to full welding & ensure that only qualified welders are allowed to perform in accordance with the approved WPS.
o Perform visual Inspection on completed welds for the occurrence of Porosity, cracks, Undercuts, spatter & arc strike prior to NDT.
o Daily Activity reports.
o Ensuring implementation of Quality Control Plan, Procedure, and Inspection & Test Plan.
o Co-ordination of all testing, punch clearance and rectification activities leading a Team of pipe fitters, welders and mechanical technicians.
o Review and evaluate plan, isometric and P&ID’s for monitoring and supervising, Pre-
Commissioning activities.

o Highly proficient in interpretations of all kinds of drawings like piping drawings i.e. GAD, P&ID and Isometric, Mechanical Equipment drawings.
o Review of Method of statements and other Work procedures for client approval.
o Line checking prior to hydro testing to verify piping erection as per isometric drawing, flanges rating, valve direction and orientation, type of valves, pipe supports and internal cleaning of piping to verify that interior is clean of foreign materials.
o Generate punch lists and close out of punch items after completions accordance to (SAIC-A- 2010).
o Inspection of Valves Installation.
o Check flow direction arrows on valves; verify that the properly identified valves are installed in accordance with the flow diagram. Ensure that pipe supports hangers and guides have been installed in accordance with the piping drawings and the pipe support details
o Modification of line routing as per site condition & incorporating in the Piping Plan.
o All permanent flange joints were inspected; gasket material verified & properly torque.
o Preparing and review all test package and timely interact with contractors for the performance of work.
o Inspection of pressure test (Hydro) according to piping class, test limits accordance to (SATIP-A- 004-02).
o Interacting with other department like planning department, QA/QC department, Design department, Warehouse.
o Guiding the bolt torqueing and alignment of flanged joints with correct gasket, stud-bolts and nuts as per drawings and project specification.
o Coordinate with Field Engineers for preparing As built Drawings and clearance
o Coordinating all documentation and correspondences with client

o Able to read P&ID, isometric drawing, welding symbols, familiarized in codes/standards and able to identify material specification & it equivalent composition.
o Manage the prefabrication works by the contractors including the inspection of incoming materials, material handling, heat number transfer, Fit up, welding activities, post weld heat treatment of welding jobs, hardness test, reinforced pad test, orientation and flush grinding of orifice flanges.
o To assist the Site Superintendent and coordinate the Supervisors activity, carry out and implement the QA/QC program, arrange and conduct meetings under the Site Superintendent direction.
o Arrange meeting to ensure completion of category “A” punch items, prior to hydro testing. Follow-up with contractor’s to complete all the “B” category punch items as per agreed punch list & according to the project schedule.
o Highly proficient in interpretations of all kinds of drawings like piping drawings i.e. GAD, P&ID and Isometric, Mechanical Equipment drawings.
o Review of Method of statements and other Work procedures for client approval.
o Line checking prior to hydro testing to verify piping erection as per isometric drawing, flanges rating, valve direction and orientation, type of valves, pipe supports and internal cleaning of piping to verify that interior is clean of foreign materials.
o Generate punch lists and close out of punch items after completions accordance to (SAIC-A- 2010).
o Inspection of Valves Installation