Hendy Setiawan

Petrofac is one of the biggest EPCi Company in Middle East - UAE which focusing on upstream oil and gas sector including pipeline, utility plant and also downstream sector such as refinery. As a senior metallurgy & corrosion engineer in charge for Bapco/Tatweer (gas compression) and ADNOC proposal / project. Job Description: o Prepare Material Selection Report. o Prepare Material Selection Diagram. o Perform CO2 corrosion rate calculation using ECE5 software. o Sour and non-Sour material review. o Prepare painting / coating specification o Prepare internal coating / lining specification o Prepare thermal insulation specification o Review mechanical datasheet o Review PFD and P&ID o Review vendor proposal o Coordinating with other discipline lead o Manhour preparation

1. As Client representative for Trans-Pacific Petrochemical Indotama Plant Design Build Competition Basic Engineering Design (BED) and Front-End Engineering Design (FEED) TPPI Olefin Complex Development Project (Project - Onshore). Job Description:
• Managing, evaluating and controlling the BED & FEED of the project (particular related to material scope) being done by Contractor in order to minimize unnecessary deviations (lower risk of change orders) and minimize dispute between Owner and relevant parties as required (Contractor, Licensor, Vendor, etc.) during project execution and to meet goal of the project.
• Supervising and conducting consistency checks and reviews of Licensor and Contractor performances in Engineering Stage (particular related to design safety aspect) during BED & FEED phase to ensure that the offering is consistent with the Owner Basis of Design and project expectations and to fulfil Owners requirements based on bidding documents.
• Supporting Owner in defining proper project implementation strategy including scope of project management services (related to design safety aspect) for EPC in order to achieve smooth implementation of EPC stage of the project.
• Lead the project execution (as an extension of Owner) and provide project management (particular related to design safety aspect) to meet the schedule, quality, cost, safety, and environmental compliance of the delivered project.
• Review BED & FEED documents produced by Contractor (related to Material discipline)
• Participate in 3D Model Review meeting
• Conduct Material weekly meeting along with Contractor

2. Front-End Engineering Detail for British Petroleum - Ubadari Carbon Capture Project. The UCC project covers the development of Ubadari, Tangguh EGR (Enhanced Gas Recovery), and onshore hydrocarbon compression. These projects collectively make up the Ubadari, Carbon Capture, Compression (UCC) projects.
UCC onshore development comprises the following new facilities and equipment:
• Tangguh EGR will transport reservoir CO2 from the LNG trains and re-inject in the Vorwata field through new motor-driven compression facilities located west of Train 3, thus unlocking additional reserves from the Vorwata reservoir.
• Hydrocarbon Compression (HCC) located near the existing Onshore Receiving Facilities will allow reduction of the arrival pressure from all offshore gas fields through new motor-driven compression facilities, thus reducing the onshore arrival pressure and maximizing gas production to keep the LNG Trains at capacity thereby extending life of the field.
• A combined Cycle Power Plant (CCPP of adequate size located west of Train 3 Utility area will provide all electrical power for the EGR and HCC compression facility and any ancillary loads through a combination of gas turbine generators and steam turbine generators. Daily job desk:
• Prepare Material Selection Philosophy.
• Prepare Material Selection Diagram.
• CO2 corrosion model calculation
• Cathodic protection design
• Prepare specification for non-metallic material
• Corrosion management strategy
• Prepare Coating specification.
• Prepare structural welding and fabrication specification

RDMP-Project RDMP project is the revitalization of 5 existing refineries in Cilacap (Central Java), Balongan (West Java), Dumai, Balikpapan and Plaju to improve the capacity and competitiveness of refineries in Indonesia. Balikpapan refineries consist of Three part, LAWE-LAWE scope is offshore terminal (single point mooring), crude storage tank and pipeline (onshore and subsea), ISBL for the main processing such as Crude Distillation Unit, Hydrogen Manufacturing Unit, Vacuum Distillation Unit (VDU), Residue Fluid Catalytic Cracking Unit (RFCC) etc. and the last is OSBL which consisting of Utility plant such as Steam & Boiler, Cooling water, Firewater, Flare etc. Job Description:
• Managing and evaluating the EPC stage of the project (particular related to material scope) being done by Contractor in order to minimize unnecessary deviations (lower risk of change orders) and minimize dispute between Owner and relevant parties as required (Contractor, Licensor, Vendor, etc.) during project execution and to meet goal of the project
• Coordinate the team doing the project.
• Interfacing and inter discipline work.
• Advice Project Engineer for any material/corrosion issue.
• Participate in weekly meeting with Contractor.
• Review/verification of material selection diagram
• Review/verification of material selection philosophy.
• Review/verification of project specification e.g., painting/coating, thermal insulation and fireproofing.
• Respond the technical query from Contractor related to material Eng. Scope.
• Interdisciplinary review document e.g., equipment list, P&ID, mechanical datasheet, etc.
• Vendor document review.

IKPT is a subsidiary of TOYO Engineering Corporation in the Southeast Asia region (Indonesia). List of Project/ Proposal:
• Timor Coal-Fired Power Plant 2X50MW Project; PLN.
• Sulut Coal-Fired Power Plant 2X50MW Project; PLN.
• Rimau - Production Water Handling Improvement project; Medco E&P Indonesia.
• Butene-1& Methyl Tert-butyl Ether (B1-MTBE) Plant project; Chandra Asri.
• Suban Compression Project; ConocoPhillips.
• Dayung Compression phase 2 project; ConocoPhillips.
• Synthetic Rubber Indonesia Project.
• Kaltim-5 Project (3500 MTPD of urea and 2500 MTPD of Ammonia); PT Pupuk Kalimantan Timur.
• Kerendan gas salamander development (Proposal - Onshore).
• North Duri Development Area 13 / NDD13; Chevron Pacific Indonesia (Proposal - Onshore).
• Lumut Balai 2; Pertamina Geothermal (Proposal - Onshore). Job Description:
• Prepare Material Selection Philosophy.
• Perform CO2 corrosion rate calculation.
• Prepare Material Selection Diagram.
• Design review for cathodic protection.
• Design review for coating and chemical resistant lining system.
• Prepare Painting / Coating specification.
• Prepare Thermal Insulation Specification.
• Prepare Manning / manpower planning.
• Prepare TBE for paint/coating work.
• Prepare TBE for Insulation work.
• Review scope of work (Requisition) for subcontractor work.
• Kick of meeting for painting / coating / Thermal insulation work
• Support for Fireproofing work.
• Failure analyses related to material failure.
• Assessment for remaining life the equipment/piping.
• Support for Cathodic protection work.

One of company which focusing on foundry, an investment casting method a.k.a precision casting and subsequent machining process for stainless steel and carbon steel material.

Job Description:
• Maintain quality of the casting material during casting until machining process.
• Assist for new product and development. Achievement:
• Improve the sequence of work in the foundry/metal casting in order to get a good microstructure of the material.

Job Description:
• CIPS and DCVG survey for undergound pipeline of PGN - Indonesia.