Hussain Sardar

• Performed daily site inspections for civil, structural, and architectural works to ensure compliance with
approved drawings, project specifications, Saudi Building Code (SBC).
• Inspected site preparation activities including excavation, grading, backfilling, compaction, and leveling
works prior to construction activities.
• Supervised installation and construction of temporary and permanent civil structures including platforms,
ramps, access roads, hardscape areas, pavilions, fencing, drainage systems, and utility infrastructure.
• Verified contractor activities against approved IFC drawings, method statements, material submittals, and
Inspection Test Plans (ITPs).
• Conducted inspections for concrete works including formwork, reinforcement, embedded items, concrete
pouring, curing, and finishing activities.
• Ensured all civil works complied with project quality procedures, contract specifications, and international
standards such as ASTM, ACI, and ISO requirements.
• Reviewed and verified RFIs, MIRs, shop drawings, and technical submittals before consultant approvals.
• Monitored workmanship quality and issued Site Observation Reports (SOR), NCRs, and corrective actions
for non-compliant activities.
• Coordinated with architectural, MEP, structural, and infrastructure teams to resolve site conflicts and

• Oversee all aspects of civil construction activities, including structural, architectural, and finishing works.
• Conduct Though inspection of Structure Components including RCC and Pipe Culverts, Retaining Walls,
Wet Utilities, Water Tanks ensure that all equipment and works are in strict compliance with the contract,
the technical specifications, and the applicable standards and practices and that the implementation timing
is adhered to.
• Review project documents including methodology, quality control procedures, and construction schedule.
• Oversee/inspect site construction work daily, witness tests, identify non-compliance to construction
documentation, and recommend corrective measures.
• Ensured dimensional accuracy and embedment conformity by reviewing drawings and coordinating with
designers.
• Performed RCA on NCRs and monitored the implementation of CARs to prevent recurring issues.
• Verified that only approved materials were utilized, raising quality concerns proactively to avoid delays.
• Reviewed quality documentation, ITPs, and method statements before submission to the client.
• Prepared deviation and progress reports to support timely project delivery.
• Review the correctness of job-specific quality records prior to issuance to client.
• Ensuring that the site works are carried out by the requirements of the specifications and contract,
applicable codes and standards, design drawings, relevant safety regulations, and local laws and good
engineering practice as mentioned in tender documents.
• Preparing, arranging, and participating in meetings for site coordination, progress review, and other
meetings deemed necessary.
• Reviewing the progress reports showing the progress of erection work prepared by the contractor.
• Coordinate and liaise with clients and stakeholders.

ensure smooth project execution.
• Witnessed field testing activities including compaction tests, concrete slump tests, cube compression tests,
and material inspections.
• Inspected incoming construction materials to verify compliance with approved material specifications and
consultant approvals.
• Ensured implementation of HSE standards, proper barricading, warning signage, and safe access during
construction activities.
• Participated in progress meetings, technical coordination meetings, and contractor inspections with client
representatives.
• Prepared daily inspection reports, weekly progress reports, snag lists, and final punch list inspections.
• Supervised project close-out activities including rectification works, as-built verification, and final
handing-over inspections.

• Supervised and monitored the quality of different kinds of Hydraulic structures civil works in the project
components e.g., Water Tanks, Aqueducts, Box and tripoidal channel.
• Perform comprehensive quality control checks on materials, workmanship, and construction methods.
• Monitor construction progress in real-time, identifying and documenting any deviations from approved plans
or potential issues before they escalate
• Collaborate with contractors, engineers, and project managers to address construction-related concerns
transparently and resolve issues efficiently.
• Prepare detailed inspection reports that include observations, test results, recommendations, and photographic
evidence.
• Verify that all work meets rigorous health, safety, and environmental standards, ensuring full compliance with
regulatory requirements
• Attend site meetings regularly and provide technical input on construction matters.
• Review and interpret technical drawings, specifications, and project documentation.
• Review structural and civil drawings, technical reports, specifications, and material submittals submitted by
contractors to ensure compliance with project scope, structural design requirements, and contract
specifications
• Monitor excavation, backfilling, formwork, reinforcement, concrete placement, and finishing of the structures
• Verification of BBS and their execution at site as per construction drawings and specifications.
• Drafting Letters, Site Instruction and NCRs. Identify non-compliant work and take appropriate actions.
• Preparing daily, weekly & monthly Progress Reports.
• Site Visits and Meeting with Client and contractor representatives.

• Conduct daily site inspections of structural works to ensure compliance with approved drawings, project
specifications, contract documents, Saudi Building Code (SBC), ACI, ASTM, and relevant international
standards.
• Monitor and inspect all structural activities including excavation, foundation works, raft foundations,
isolated footings, pile caps, retaining walls, shear walls, columns, beams, slabs, staircases, structural steel
works, and roof structures.
• Review contractor shop drawings, method statements, inspection and test plans (ITPs), material submittals,
and technical submissions related to structural works.
• Verify setting out, coordinates, levels, dimensions, and alignment of structural elements before
commencement of work.
• Inspect excavation works and ensure founding levels, soil conditions, and ground preparation comply with
geotechnical recommendations and approved design requirements.
• Witness and verify foundation inspections before concrete placement, including reinforcement installation,
formwork alignment, dimensions, cover requirements, embedded items, and anchor bolts.
• Ensure reinforcement works comply with approved shop drawings, bar bending schedules, spacing
requirements, lap lengths, development lengths, concrete cover, and detailing requirements.
• Inspect formwork systems for stability, dimensions, line, level, plumbness, cleanliness, and adequacy to
withstand construction loads.
• Verify installation and positioning of embedded items, sleeves, inserts, conduits, water stops, anchor bolts,
and builders work openings prior to concrete pouring.
• Witness concrete pouring operations and ensure compliance with approved mix designs, slump
requirements, temperature limitations, placement procedures, vibration methods, and finishing techniques.
• Inspect post-tensioning activities where applicable, including tendon installation, stressing operations,
anchorage systems, and grouting works.
• Monitor construction joints, expansion joints, and waterproofing interfaces to ensure compliance with
project specifications.
• Inspect fireproofing applications, corrosion protection systems, galvanizing works, and protective coating
systems for structural steel components.
• Verify that all structural materials including concrete, reinforcing steel, structural steel sections, grout,
waterproofing products, and repair materials are approved before use.
• Monitor contractor compliance with approved method statements, risk assessments, quality procedures, and
project execution plans.
• Prepare and issue Site Observation Reports (SORs), Non-Conformance Reports (NCRs), Deficiency
Notices, and Corrective Action Requests for non-compliant works.
• Follow up on corrective actions and verify closure of NCRs and quality-related observations.
• Coordinate with Resident Engineers, Structural Engineers, Architects, MEP Inspectors, Quantity
Surveyors, and Contractors to resolve technical and construction-related issues.
• Participate in site meetings, technical coordination meetings, progress review meetings, and quality
inspections.
• Review and verify contractor requests for inspections (WIRs) and ensure inspections are conducted in
accordance with approved ITPs.
• Maintain detailed daily inspection reports, site diaries, photographic records, and quality documentation.
• Monitor structural repair works, remedial measures, crack repairs, concrete restoration activities, and
strengthening works where applicable.
• Inspect waterproofing interfaces associated with basements, retaining walls, roofs, wet areas, and
underground structures.
• Ensure health, safety, and environmental requirements are maintained during structural construction
activities and report unsafe conditions.
• Support project handover activities by conducting snagging inspections, punch-list verification, and final
quality assessments.

• Conducted inspections for excavation, subgrade preparation, backfilling, compaction, concrete works,
paving works, and external landscape finishes.
• Inspected architectural works including floor finishes, wall cladding, decorative concrete, gypsum ceilings,
metal ceilings, glass installations, waterproofing systems, painting works, and façade installations.
• Verified contractor compliance with approved shop drawings, material approvals, method statements, and
consultant specifications.
• Witnessed quality inspections and testing activities including slump tests, field density tests, waterproofing
tests, concrete cube tests, and material sampling inspections.
• Inspected formwork systems, reinforcement installations, embedded items, and concrete pouring activities
to ensure compliance with approved standards.
• Issued NCRs, CARs, and site observation reports for defective or non-compliant works and monitored
implementation of corrective actions.
• Coordinated with consultant inspectors, contractors, subcontractors, and QA/QC personnel to ensure
quality workmanship and timely completion of project activities.
• Conducted snagging inspections, prepared punch lists, and verified completion of rectification works
before project handover.
• Ensured implementation of project HSE requirements, housekeeping standards, and airport operational
safety regulations.

Roles & Responsibilities
• Supervise and inspect day-to-day structural construction activities to ensure execution in accordance with
approved IFC drawings, project specifications, method statements, and contract requirements.
• Supervise construction of control buildings, relay rooms, cable trenches, transformer foundations,
switchgear buildings, guard houses, and auxiliary structures.
• Verify installation of anchor bolts, embedded plates, cable trench reinforcement, grounding provisions, and
equipment foundation requirements.
• Coordinate structural activities with architectural and MEP disciplines to ensure compliance with project
requirements.
• Supervise construction of prayer halls, minarets, domes, courtyards, ablution facilities, and associated
mosque structures.
• Inspect reinforcement and concrete works for domes, arches, decorative concrete elements, elevated
structures, and architectural features.
• Coordinate with Construction Managers, Site Engineers, QA/QC Engineers, Surveyors, Planning
Engineers, and subcontractors to ensure smooth execution of structural works.
• Review approved shop drawings, structural details, bar bending schedules, method statements, and
construction sequences before commencement of work.
• Monitor excavation works and ensure proper excavation dimensions, formation levels, dewatering
arrangements, and soil conditions are in accordance with approved drawings and geotechnical
recommendations.
• Supervise construction of foundations including isolated footings, combined footings, raft foundations, pile
caps, grade beams, retaining walls, equipment foundations, and underground structures.
• Inspect reinforcement works for foundations, columns, beams, slabs, shear walls, staircases, retaining
walls, water tanks, and other structural elements.
• Monitor formwork installation to ensure proper dimensions, alignment, stability, plumbness, levels, and
compliance with approved formwork systems.
• Verify installation of embedded items, sleeves, inserts, conduits, anchor bolts, water stops, embedded
plates before concrete pouring.
• Ensure construction activities comply with approved Inspection and Test Plans (ITPs), Method Statements,
and Quality Control Procedures.
• Monitor grouting activities for base plates, equipment foundations, structural supports, and anchor bolt
systems.
• Ensure proper implementation of concrete repair works, structural modifications, strengthening works, and
approved corrective actions.
• Inspect waterproofing protection concrete, retaining wall protection systems, basement structures, roof
slabs, and water-retaining structures before subsequent construction activities.
• Participate in daily toolbox meetings and site coordination meetings to communicate work priorities and
safety requirements.
• Coordinate consultant inspections, material inspections, and hold-point inspections to avoid delays to
construction activities.
• Assist QA/QC Engineers in preparing Work Inspection Requests (WIRs), Material Inspection Requests
(MIRs), and inspection documentation.
• Monitor subcontractor performance and ensure compliance with approved quality and construction
requirements.
• Participate in snagging inspections, punch-list rectification, and project closeout activities.

Client:
Responsibilities:
• Supervised different kinds of civil works e.g. Masonry work, earthwork, structure work. carried out at the site.
• Supervise and inspect activities to ensure adherence to project designs, specifications, and quality standards.
• Monitor construction progress and prepare daily/weekly reports.
• Conduct site inspections to identify and resolve technical issues.
• Coordinate with contractors, subcontractors, and project stakeholders to ensure smooth project execution.
• Ensure compliance with health, safety, and environmental regulations.
• Provide technical support and guidance to the project team.
• Assist in the preparation of project schedules, budgets, and resource plans.
• Conduct quality control checks and ensure all materials and workmanship meet project requirements.
• Liaise with clients and consultants to address project-related concerns.
• Preparing progress reports on a Daily and weekly basis, preparing/Checking IPCs of the executed work, and
Coordinating with Senior Engineers for smooth execution of construction work.

• Supervised civil and structural construction activities for hydropower infrastructure and associated
transmission line works.
• Inspected powerhouse structures, retaining walls, water channels, foundations, drainage systems, and
transmission line foundations.
• Verified excavation works, reinforcement placement, formwork, anchor bolts, concrete casting, and curing
operations.
• Coordinated with survey and design teams to ensure construction activities complied with approved
drawings and project specifications.
• Monitored contractor activities for compliance with quality standards, approved Method Statements, and
safety requirements.
• Conducted quantity verification, material inspections, and progress monitoring activities.
• Witnessed field and laboratory testing for soil compaction, concrete strength, and construction materials.
• Assisted in preparation of daily reports, progress updates, quality documentation, and project coordination
meetings.
• Coordinated with multidisciplinary teams to resolve technical and construction-related issues during project
execution.