Electrical Instructor
Laureate Vocational Saudi Arabia
Total years of experience :19 years, 2 Months
LAUREATE VOCATIONAL SAUDI ARABIA - LVSA
(International Technical College at Jeddah - College of Excellence)
Jeddah City, Kingdom of Saudi Arabia
December 28, 2014 - up to PRESENT
POSITION: ELECTRICAL INSTRUCTOR / TRAINER / ASSESSOR
DUTIES AND RESPONSIBILITIES:
• Responsible for developing curriculum and teaching students in various concepts of Electrical Technology including electrical installations (LV Systems), motor control, maintenance, troubleshooting and repair of various electrical components and equipment, low voltage and medium voltage switchgear and control gear, security systems, basic electrical design and calculation, preventive maintenance of equipment, data communication copper cabling, Occupational Health and Safety (OHS) and risk assessment & management.
• Provide hands-on training using electrical laboratory apparatus such as Electronics & Circuit Modules, Intellitek, Labvolt, Motor Control and Troubleshooting
Training Equipment, Electrical Testing Equipment and PLC Training Equipment.
• Develop teaching materials and practical activities with accordance to Saudi Skills Standard (SSS).
• Train up to 25 hours of in class instruction per week.
• Maintain positive rapport with all trainee’s and create a positive learning environment to adequately communicate lessons.
• Enforce the trainee management and disciplinary policies of the College.
• Perform clerical duties, as required, relating to textbooks, instructional supplies, student reports and records, attendance reports, etc.
• Participate in Job Skills curriculum development and planning with other Instructors and Curriculum Developers.
LAUREATE VOCATIONAL SAUDI ARABIA - LVSA
(Higher Institute of Water & Power Technology Project)
Kingdom of Saudi Arabia - P.O. Box 53, Rabigh 21911
January 20, 2014 - December 28, 2014
POSITION: ELECTRICAL INSTRUCTOR
DUTIES AND RESPONSIBILITIES:
• Develops teaching materials for each course/module to enable to support the knowledge required for a trainee to develop satisfactory workplace competence.
• Provide hands-on training using electrical laboratory apparatus such as Electronics & Circuit Modules, Intellitek, Labvolt, Motor Control and Troubleshooting
Training Equipment, Electrical Testing Equipment and PLC Training Equipment.
• Develops practical activities, and practice Hands-on troubleshooting, maintenance and repair for the following subjects / equipment:
- Transformer
- Electric Motors
- Generators
- Switchgears
- Circuit Breakers (MV & HV)
- Electrical Panel (LV & MV)
- Battery System
- MOV (Motor Operated Valve)
- MCC (Motor Control Center)
- VFD (Variable Frequency Drive)
- Fire Alarm System
SAUDI ELECTRICITY COMPANY
Materials Engineering Department
Kingdom of Saudi Arabia - Southern Operating Region, Abha Head Office
May 20, 2010 - July 27, 2013
POSITION : MATERIALS ENGINEER
DUTIES & RESPONSIBILITIES:
• Direct and interprets the overall activities of Material Management, Material Requirements Planning, Product Cataloguing & Standardization, Inventory Management, Service Division Purchasing, Receiving, Shipping, Warehousing, Staging for Job Site Projects, & Material Return Documentation from the Job Sites for the Company and its Branches using Systems Applications & Products (SAP)System.
• Coordinates, monitor and expedites flow of distribution, transmission, substation & generation materials, parts, and assemblies between sections or departments, according to production and shipping schedules of department priorities thru SAP System.
• Trains and Conduct Seminars for new employee for Material Management using SAP System.
• Ensure that products comply with national and international legal and quality standards.
• Evaluate technical specification (as per company standard) and economic factors relating to process or product design objectives.
• Plan & evaluate new projects, consulting with other engineers and corporate executive as necessary.
• Advising on quality inspection, maintenance and repair procedures.
• Monitor and control movement of material (Issuance, Goods Receipt, Goods Delivery, Materials Return) thru SAP System.
• Notes on a daily basis about what is the mistakes or problems in Warehousing.
➢ SAUDI ELECTRICITY COMPANY (UNDER CONTRACTING OF SAUDI DELTA CO.)
Distribution Network Project Section
Kingdom of Saudi Arabia - Southern Operating Region, Abha Head Office
January 15, 2008 - January 28, 2010
POSITION: DISTRIBUTION MAINTENANCE ENGINEER / PROJECT CONSULTANT /
INSPECTOR / PLANNING & DESIGN ENGINEER
DUTIES & RESPONSIBILITIES: (DISTRIBUTION MAINTENANCE ENGINEER / INSPECTOR)
• Responsible for directing, supervising, and controlling the efficient
performance of the contractors and other resources in accordance with the company applicable standards to ensure attainment of project objective.
• Ensure that safety guidelines are followed by contractors while executing the work so as to minimizes the risk injury to personnel or damage to equipment
& property supervised by contractor's safety officer or by site engineer.
• Ensure that all work is carried out to the company specifications, policies & Procedures.
• Evaluate plans & specification for High & Low Voltage of Overhead /
Underground Network prior to execution by the contractors.
• Evaluating and ordering of all electrical materials and equipments
required for the installation of overhead and underground network projects.
• Supervising execution of electrical erection, installation & troubleshooting of equipments with close coordination with the electrical contractors.
• Supervising the technical works of the contractors/sub-contractors in accordance with the company applicable standards.
• Supervise & inspect the installation of various electrical equipments such as package & unit substations, transformers, switches, switchgears, LV panels & other pad mounted electrical equipment including pre-commissioning test.
• Supervise & inspect execution of underground network of contractors/
sub-contractors, from excavation, cable laying, jointing, terminations etc..
• Supervise & inspect the installation of customer service facilities including
service cables, meters, breaker cabinets, meter boxes & other equipment
required to monitor power consumption.
• Supervise & inspect the installation of pole mounted equipment such as transformers, Switches, auto-recloser, capacitors, fuse boxes & cut-outs,
airbreak switches, voltage regulator and poles for distribution overhead network
Including associated hardware to frame the poles in various configuration.
• Supervise & inspect the installation of riser assemblies of various
configurations & voltages to integrate overhead & underground distribution
systems including earthing of various electrical equipments.
• Evaluating, checking and monitoring materials and equipments issued by planning if correct and as per the plan&specification, to control equipments
& materials which are not needed in the projects and to minimize exceed cost of materials.
• Re-survey plans with objection or incorrect plans as to minimize the delay of the projects.
• Responsible for Daily, Weekly & Monthly Progress Report of the projects.
• Responsible for Monthly Feeder Data for Maintenance. Updating feeders.
• Evaluating Invoices of contractors for Project Accomplished.
DUTIES & RESPONSIBILITIES: (PLANNING & DESIGN ENGINEER)
• Responsible for the design of Overhead and Underground Electrical Distribution
Network 33/13.8KV/380-220-127v, including design of unit and package
substation.
• Designs, plans and implement layout of distribution lines in accordance to the
Engineering principles.
• Analyze engineering proposals and other technical data related to design.
• Conducting LV reinforcement study by identifying substations in overloaded
feeders including transformers loading and by accessing where power may not be
secure during emergencies.
• Provides technical information concerning materials, properties, distribution lines,
facilities and other factors that affect long range plant planning.
• Long term planning to develop a reliable network/power supply to consumers.
• Develop proposals for remedial measures in short, medium and long term
planning.
• Planning HV and LV network using New System (Unified Distribution System)
• Develop and plans HV and LV Line for Network Improvement.
• Develop and maintains Materials and Construction Standard.
➢ SAUDI DELTA COMPANY Ltd.
Kingdom of Saudi Arabia P.O Box 295664 - Riyadh 11351
December 20, 2005 - December 15, 2007
POSITION: PROJECT ENGINEER / SITE ENGINEER / CADD DESIGNER
(DISTRIBUTION NETWORK PROJECTS)
DUTIES & RESPONSIBILITIES: • Designing Overhead and Underground Distribution Network up to 36 KV.
• Designing on Route Plan & Profile (HT), Staking sheets (HT/LT) & V.D.C. (LT)
• Supervision of Constructions of Overhead and Underground Distribution
Network up to 36 KV for Consumer Connection Electrification.
• Supervision of Installation of Metered Ring Main Unit for HV
• Responsible for Daily, Weekly, Monthly Progress Report and Invoices.
• Conduct, Planning & Sectionalizing Studies for the Distribution line.
• Surveying, Line Staking and Prepare Bills of Materials in the Distribution
Projects
• Preparing all the Materials needed in the Jobsite.
• Knowledgeable & Can install the following Equipment for Distribution
Constructions Line: - Transformer
- LV Panels
- Lightning Arrester
- Fuse Cut-Out
- Load Break Switch
- Voltage Regulator
- Recloser
• Can Operate the Following Testing Instrument: - Megger
- Earth Resistance Tester
AL-SALEH AND MASSOUD COMPANY (ASAMCO)
Kingdom of Saudi Arabia P.O. Box 12080 - Dammam 31473
September 28, 2004 - September 30, 2005
PROJECT : CONSTRUCTION, MAINTENANCE AND OPERATION OF 132/33/13.8KV
OUTDOOR AND INDOOR TYPE POWER DISTRIBUTION SUBSTATION OF
SAUDI ELECTRICITY COMPANY - JIZAN, SOUTHERN REGION OF SAUDI ARABIA
POSITION : POWER SUBSTATION FIELD ENGINEER
DUTIES & RESPONSIBILITIES:
• Supervise the preventive and emergency maintenance of substation equipment.
• Develops preventive maintenance program to Substation equipment.
• Supervise and monitor the installation of new Transformers & Switchgears for the
new constructed AIS/GIS Indoor Substation with according to engineering electrical
standards.
• Supervise the application of electrical safety in maintenance activities, such as
effective grounding, tags on equipment & issuing of work orders and applying safety
requirements at work site.
• Review the test results of every major equipment.
• Schedule installation, testing and commissioning of major equipment
• Evaluate Company maintenance standards, PM frequencies, procedures and practices
and suggest revision/modification
• Review the test results / take appropriate action to replace / phase out equipment.
• Supervise the execution of maintenance procedures and requirements for the
equipment by the crew related to the field of working.
• Preparation of fault rectification report and recommendations to minimize the faults
for reliable performance of equipments.
• Correspond with manufacturers for their expert opinion in resolving the special
problems and defects noticed during operation of equipment.
• Conduct special technical studies.
• Prepare modification packages and scope of work to rectify the system /
equipment deficiencies
• Investigate equipment problems in order to provide solutions to prevent recurrence
of problems.
• Provide the operating department with specialized safety services.
• Provide technical support in analyzing equipment testing data
• Prepare the daily, weekly, monthly & yearly maintenance report of substations
Equipment.
• Prepare the yearly preventive maintenance schedule of its substation equipment.
- Sabangan, Alaminos City, Pangasinan
• Three-Storey Residential Bldg.- (Electrical, Structural, Architectural Design -
July 2005) • Owner - Mr. & Mrs. Rene Abenes
- Camella Homes Subd., Sucat, Paranaque, Metro Manila
• Others - Electrical Installations & Renovations (Commercial & Residential Units
Poblacion, Alaminos City, Pangasinan
May 2004 - September 2004
POSITION: ELECTRICAL CADET ENGINEER
DUTIES & RESPONSIBILITIES: • Designing of Power & Lighting Layout
• Supervision of Installation of Power & Lighting including Electrical fixtures.
• Troubleshooting & Installation of Power & Lighting Panel, Circuit Breakers,
Switches, Outlets, etc.
SELF-EMPLOYED ELECTRICAL ENGINEER & AUTOCAD DRAFTSMAN with VARIOUS PROJECTS (ELECTRICAL, STRUCTURAL, ARCHITECTURAL)
- May 2004 - September 2004
COLEGIO DE DAGUPAN (FORMERLY COMPUTRONIX COLLEGE)
Dagupan City, Pangasinan
May 2004 - September 2004
POSITION : ELECTRICAL INSTRUCTOR
SUBJECT / TOPIC : ELECTRICAL CIRCUITS (DC, AC & THREE PHASE CIRCUITS)
ENERGY CONVERSION ( AC & DC MACHINES)
DUTIES & RESPONSIBILITIES:
• Handling students.
• Provide lectures through power point presentation, board discussions and
laboratory experiments using Circuit modules.
• Assessment of students through written and practical exams.
• Preparation of Orientation for the new intake.
• Preparation of Class Attendance Sheet.
• Issue of grade report to students.
• Preparing monthly report.
DESIGN PROJECTS: • Two-Storey Residential Building - (Electrical Design & Installation - May 2004)
• Owner - Mr. & Mrs. Rodolfo Quejadaz
College Bachelor of Science in Electrical Engineering Adamson University, Manila, June 1999 - May 2004
High School Alaminos City National High School Alaminos, Pangasinan, June 1995 - March 1999
Elementary Popantay Elementary School Alaminos, Pangasinan, June 1988 - March 1995 VOCATIONAL COURSE