FCAW welder/ Mig welder
AIC
Total years of experience :8 years, 10 Months
Freeport Zone, Philippines 2200
Telephone Number: (047) 252-7630
Position: Fabricator (Steel and aluminum) Welder
(Smaw/Fcaw)
Job description: Fabricates platings, Radial Frames,
Bulkheads, side platings, stabilizer tank
Plating, Hull, side shell platings,
➢ Cutting plates using manual plasma cutter, welding using smaw, and fcaw for aluminum with argon gas as shielding.
➢ Do layouts, interpret and understand drawing.
Inclusive Date: June 26, 2013 up to the present
Company: AIC (Arabian International Company)
For steel structures
Address: Ras Al Khaimah, U.A.E.
P.O. Box No. 6256 Ras Al Khaimah
Position: FCAW welder/ Mig welder
Job description: Structural welder
➢ joint two metal plate in different position, flat, vertical, horizontal and overhead fillet.
➢ Can weld 1G, 2G, 3G butt joint / seam line.
➢ Welding I-beam using Fcaw/Mig wire size 1.2/1.4/1.6 mm. welded plate size 4mm to 20mm.thick plate welded 20mm to 60mm.
➢ Welded Brackets, stub out, stiffener's, web, frame, chanels, columns, girder grids, and base plate.
Company: HYS (HARBOR YATCH SERVICES)
Address: Port District, Fisherman's Wharf Complex
San Bernadino Road Subic Bay
Freeport Zone, Philippines 2200
Company: HYS (HARBOR YATCH SERVICES)
Address: Port District, Fisherman's Wharf Complex
San Bernadino Road Subic Bay
Freeport Zone, Philippines 2200
Inclusive Date: December 1, 2007 - March 22, 2010
Company: Green Beach ( Hanjin Heavy Industries & Construction) Ship Building
Position: Worker / FCAW (CO2) welder
Job Description: To joint two metal base in different position, flat, vertical, horizontal and over head fillet
➢ Can weld 1G, 2G, 3G butt joint / seam line.
➢ Weld brackets, web frames, Long-G, base plate, stiffener, collar plates, stringer, shell plate, longitudinal bulkhead, pad eye, girders, bottom plates, bulkheads, and air test lines.
➢ Can do Air Carbon Arc Gouging.
➢ Welded plate thickness 8mm to 70mm
➢ Welding wire size 1.4mm
Company: HYS (HARBOR YATCH SERVICES)
Address: Port District, Fisherman's Wharf Complex
San Bernadino Road Subic Bay
Freeport Zone, Philippines 2200
Inclusive Date: November 26, 2002 - January 27, 2006
Company: Rocafor General Construction Services
Address: Cabangaan Point, Cawag, Subic, Zambales
Telephone Number: (047) 232-2432
Position: Time keeper
Job Description: Monitor daily time record & attendance of every employee
Inclusive Date: January 22, 2002 - June 20, 2002
Telephone Number: (047) 252-7630
Position: Fabricator (Steel and aluminum) Welder
(Smaw/Fcaw)
Job description: Fabricates platings, Radial Frames,
Bulkheads, side platings, stabilizer tank
Plating, Hull, side shell platings,
➢ Cutting plates using manual plasma cutter, welding using smaw, and fcaw for aluminum with argon gas as shielding.
➢ Do layouts, interpret and understand drawing.
Inclusive Date: June 26, 2013 up to the present
Company: AIC (Arabian International Company)
For steel structures
Address: Ras Al Khaimah, U.A.E.
P.O. Box No. 6256 Ras Al Khaimah
Position: FCAW welder/ Mig welder
Job description: Structural welder
➢ joint two metal plate in different position, flat, vertical, horizontal and overhead fillet.
➢ Can weld 1G, 2G, 3G butt joint / seam line.
➢ Welding I-beam using Fcaw/Mig wire size 1.2/1.4/1.6 mm. welded plate size 4mm to 20mm.thick plate welded 20mm to 60mm.
➢ Welded Brackets, stub out, stiffener's, web, frame, chanels, columns, girder grids, and base plate.
Inclusive Date: February 09, 2011- up to March 14, 2012
Company: Delta Production Phils, Inc.
Address: Bldgs. 399, 401 & Vacant Lot, Schely Road,
SRF Compound, SBFZ
Telephone Number: (047) 252-5862/252-5112
Position: Aluminum Welder/ MIG welder
Job Description: Joining Aluminum plate using MIG
➢ Welding machine with Argon gas.
➢ Welded 3mm to 6mm aluminum plate.
➢ Welded aluminum scaffolding hand rails,
frames, guard rails, and braces.
Telephone Number: (047) 252-7630
Position: Fabricator (Steel and aluminum) Welder
(Smaw/Fcaw)
Job description: Fabricates platings, Radial Frames,
Bulkheads, side platings, stabilizer tank
Plating, Hull, side shell platings,
➢ Cutting plates using manual plasma cutter, welding using smaw, and fcaw for aluminum with argon gas as shielding.
➢ Do layouts, interpret and understand drawing.
Inclusive Date: June 26, 2013 up to the present
Company: AIC (Arabian International Company)
For steel structures
Address: Ras Al Khaimah, U.A.E.
P.O. Box No. 6256 Ras Al Khaimah
Position: FCAW welder/ Mig welder
Job description: Structural welder
➢ joint two metal plate in different position, flat, vertical, horizontal and overhead fillet.
➢ Can weld 1G, 2G, 3G butt joint / seam line.
➢ Welding I-beam using Fcaw/Mig wire size 1.2/1.4/1.6 mm. welded plate size 4mm to 20mm.thick plate welded 20mm to 60mm.
➢ Welded Brackets, stub out, stiffener's, web, frame, chanels, columns, girder grids, and base plate.
Inclusive Date: February 09, 2011- up to March 14, 2012
Company: Delta Production Phils, Inc.
Address: Bldgs. 399, 401 & Vacant Lot, Schely Road,
SRF Compound, SBFZ
Telephone Number: (047) 252-5862/252-5112
Position: Aluminum Welder/ MIG welder
Job Description: Joining Aluminum plate using MIG
➢ Welding machine with Argon gas.
➢ Welded 3mm to 6mm aluminum plate.
➢ Welded aluminum scaffolding hand rails,
frames, guard rails, and braces.
Inclusive Date: December 1, 2010 - January 27, 2011
Company: REDO- I ( Hanjin Heavy Industries & Construction) Ship building
Address: Green Beach I. Redondo Peninsula,
Subic Bay Freeport Zone
Telephone Number: (047) 252-5100
Position: Deputy Foreman / FCAW (CO2) welder
Job Description: To allocate, facilitate and monitor the workers in their work area.
➢ Educate and trained new hired workers.
➢ To meet the production schedule and keep the standard work procedures.
➢ To joint two metal base in different position, flat, vertical, horizontal and overhead fillet position.
➢ Can weld 1G, 2G, 3G butt joint / seam line
➢ Welded brackets, web frames, Long-G, base plate, stiffener, collar plates, stringer, shell plates, longitudinal bulkhead, pad eye, girders, bottom plates, bulkheads, and air test lines.
➢ Can do Air Carbon Arc Gouging
➢ Welded plate thickness 8mm to 70mm
➢ Welding wire size 1.4mm
Telephone Number: (047) 252-7630
Position: Fabricator (Steel and aluminum) Welder
(Smaw/Fcaw)
Job description: Fabricates platings, Radial Frames,
Bulkheads, side platings, stabilizer tank
Plating, Hull, side shell platings,
➢ Cutting plates using manual plasma cutter, welding using smaw, and fcaw for aluminum with argon gas as shielding.
➢ Do layouts, interpret and understand drawing.
Inclusive Date: June 26, 2013 up to the present
Company: AIC (Arabian International Company)
For steel structures
Address: Ras Al Khaimah, U.A.E.
P.O. Box No. 6256 Ras Al Khaimah
Position: FCAW welder/ Mig welder
Job description: Structural welder
➢ joint two metal plate in different position, flat, vertical, horizontal and overhead fillet.
➢ Can weld 1G, 2G, 3G butt joint / seam line.
➢ Welding I-beam using Fcaw/Mig wire size 1.2/1.4/1.6 mm. welded plate size 4mm to 20mm.thick plate welded 20mm to 60mm.
➢ Welded Brackets, stub out, stiffener's, web, frame, chanels, columns, girder grids, and base plate.
Inclusive Date: February 09, 2011- up to March 14, 2012
Company: Delta Production Phils, Inc.
Address: Bldgs. 399, 401 & Vacant Lot, Schely Road,
SRF Compound, SBFZ
Telephone Number: (047) 252-5862/252-5112
Position: Aluminum Welder/ MIG welder
Job Description: Joining Aluminum plate using MIG
➢ Welding machine with Argon gas.
➢ Welded 3mm to 6mm aluminum plate.
➢ Welded aluminum scaffolding hand rails,
frames, guard rails, and braces.
Inclusive Date: December 1, 2010 - January 27, 2011
Company: REDO- I ( Hanjin Heavy Industries & Construction) Ship building
Address: Green Beach I. Redondo Peninsula,
Subic Bay Freeport Zone
Telephone Number: (047) 252-5100
Position: Deputy Foreman / FCAW (CO2) welder
Job Description: To allocate, facilitate and monitor the workers in their work area.
➢ Educate and trained new hired workers.
➢ To meet the production schedule and keep the standard work procedures.
➢ To joint two metal base in different position, flat, vertical, horizontal and overhead fillet position.
➢ Can weld 1G, 2G, 3G butt joint / seam line
➢ Welded brackets, web frames, Long-G, base plate, stiffener, collar plates, stringer, shell plates, longitudinal bulkhead, pad eye, girders, bottom plates, bulkheads, and air test lines.
➢ Can do Air Carbon Arc Gouging
➢ Welded plate thickness 8mm to 70mm
➢ Welding wire size 1.4mm
Inclusive Date: December 1, 2007 - March 22, 2010
Company: Green Beach ( Hanjin Heavy Industries & Construction) Ship Building
Position: Worker / FCAW (CO2) welder
Job Description: To joint two metal base in different position, flat, vertical, horizontal and over head fillet
➢ Can weld 1G, 2G, 3G butt joint / seam line.
➢ Weld brackets, web frames, Long-G, base plate, stiffener, collar plates, stringer, shell plate, longitudinal bulkhead, pad eye, girders, bottom plates, bulkheads, and air test lines.
➢ Can do Air Carbon Arc Gouging.
➢ Welded plate thickness 8mm to 70mm
➢ Welding wire size 1.4mm
Inclusive Date: January 24, 2007 - November 30, 2007
Company: Nidec Subic Phils. Corp.
Address: Block B, Subic Techno Park, Subic Bay
Freeport Zone
Telephone Number: (047) 252-5828
Position: Production Operator (CNC Lathe Operator)
Job Description: Operate CNC lathe machine and troubleshoots.
➢ Maintain good machine condition.
➢ Maintain CNC Machine clean and in good condition before starting production.
➢ Warm up and dry-run the machine, make sure work piece is in its proper place. shut down machine properly according to its procedure.
Secondary Barretto High School 1997 Olongapo City, Philippines
Elementary Barretto I Elementary School 1993 Olongapo City, Philippines
