Total Years of Experience: 21 Years, 0 Months
January 2017
To Present
SR. Equipment Technician
at SMT
Location :
Saudi Arabia
) Surface Mount Technology
Alfanar Electrical System
2nd Industrial new senaya, Kingdom of Saudi Arabia
Alfanar Electrical System
2nd Industrial new senaya, Kingdom of Saudi Arabia
January 2017
To January 2018
Maintenance technician
at Qatar glass industries
Location :
Qatar - Doha
Conduct repairs and trouble shooting of production encountered machine problem.
Knowledge of trouble shooting of panel board and replacing defective parts.
Can read schematic diagram, trouble shooting electrical wiring.
Previous experience using tools including electric tools e.g., drills.
Self motivated, energetic and enthusiastic team player with good time management skills.
Ability to read, understand and follow technical instructions is essential.
Computer literate with a mechanical mindset ideally with experience operating automated lines and knowledge of PLC.
Physically fit with the ability to work 12 hour shifts and lift up to 35kgs regularly.
Knowledge in air condition repair window and split type.
Weekly Preventive Maintenance of each machine as per schedule of my superior.
Preventive Maintenance of Silicon gun.
Knowledge in Microsoft excels.
Computer Literate.
Troubleshooting and Repair of the following LISEC Machines:
Sand Blasting machine (M260)
Polishing Machine (ELAP NEXUS)
Drilling Machine (FPD.60)
Arising Machine (BELTEX)
Washing Machine (LISEC)
Tempering Machine (TAMGLASS LISEC)
CNC Cutting Machine (LISEC)
IGU Silicone Machine (TAL-50 S1/B) ( TAL-50 B)
Double glazing machine (LISEC)
Butyl machine ( LISEC)
Air Compressor (DELOS XL)
Bending Machine (LISEC
Knowledge of trouble shooting of panel board and replacing defective parts.
Can read schematic diagram, trouble shooting electrical wiring.
Previous experience using tools including electric tools e.g., drills.
Self motivated, energetic and enthusiastic team player with good time management skills.
Ability to read, understand and follow technical instructions is essential.
Computer literate with a mechanical mindset ideally with experience operating automated lines and knowledge of PLC.
Physically fit with the ability to work 12 hour shifts and lift up to 35kgs regularly.
Knowledge in air condition repair window and split type.
Weekly Preventive Maintenance of each machine as per schedule of my superior.
Preventive Maintenance of Silicon gun.
Knowledge in Microsoft excels.
Computer Literate.
Troubleshooting and Repair of the following LISEC Machines:
Sand Blasting machine (M260)
Polishing Machine (ELAP NEXUS)
Drilling Machine (FPD.60)
Arising Machine (BELTEX)
Washing Machine (LISEC)
Tempering Machine (TAMGLASS LISEC)
CNC Cutting Machine (LISEC)
IGU Silicone Machine (TAL-50 S1/B) ( TAL-50 B)
Double glazing machine (LISEC)
Butyl machine ( LISEC)
Air Compressor (DELOS XL)
Bending Machine (LISEC
November 2013
To December 2015
Equipment Technician
March 2002
To October 2013
Surface Mount Technology
at Integrated Microelectronics Inc – IMI Laguna Techno park
Location :
Philippines
Conduct repairs and troubleshooting of production equipment to avoid / minimize production downtime.
•Performs routine scheduled (and unscheduled) maintenance on all production equipment, including through-hole, surface mount placement equipment and wave soldering equipment, including daily cleaning tasks
•Maintains all capital equipment used in populating and assembling printed circuit boards utilizing through-hole and surface to mount technologies (SMT). Interprets, modifies and programs sequence for the following equipment
•Performed machine start-up.
•Conducts Engineering experiments, debug, and process flow evaluation to be approved by the customer to the start of normal production.
•Monitors and reviews process yields, generates Engineering Change Notices (ECN) to improve product quality productivity. Initiates capital appropriations request including justifications for all equipment upgrades.
•Monitors and maintain data base of (OEE) Overall Effective Efficiency.
•Works closely with manufacturing engineering to: provide cost and time saving ideas; design tooling to improve the manufacturing process; solve floor production problems; specify and order stencils, board tooling component feeders, etc.
•Maintains spare parts inventory for all production equipment.
•Performed manual soldering and disordering of component parts.
•Counsels and trains less experienced process technicians and trains production personnel in operating SMT and through-hole production equipment.
•Handling (COT Group) Change overtime SMT improvement.
•Conduct and performed machine preventive maintenance monthly and weekly schedule.
•Knowledge in electrical installation if needed.
•Can operate all (SMT) machines.
•Can operate CNC bungard machine.
•Performs routine scheduled (and unscheduled) maintenance on all production equipment, including through-hole, surface mount placement equipment and wave soldering equipment, including daily cleaning tasks
•Maintains all capital equipment used in populating and assembling printed circuit boards utilizing through-hole and surface to mount technologies (SMT). Interprets, modifies and programs sequence for the following equipment
•Performed machine start-up.
•Conducts Engineering experiments, debug, and process flow evaluation to be approved by the customer to the start of normal production.
•Monitors and reviews process yields, generates Engineering Change Notices (ECN) to improve product quality productivity. Initiates capital appropriations request including justifications for all equipment upgrades.
•Monitors and maintain data base of (OEE) Overall Effective Efficiency.
•Works closely with manufacturing engineering to: provide cost and time saving ideas; design tooling to improve the manufacturing process; solve floor production problems; specify and order stencils, board tooling component feeders, etc.
•Maintains spare parts inventory for all production equipment.
•Performed manual soldering and disordering of component parts.
•Counsels and trains less experienced process technicians and trains production personnel in operating SMT and through-hole production equipment.
•Handling (COT Group) Change overtime SMT improvement.
•Conduct and performed machine preventive maintenance monthly and weekly schedule.
•Knowledge in electrical installation if needed.
•Can operate all (SMT) machines.
•Can operate CNC bungard machine.
Technician
at SMT
Location :
Saudi Arabia
Born on November 30, 1978 @ Sta. Rosa Laguna City
5’7” in height and weighing 130lbs
Civil Status: Married
Cell phone Number: +63930-1624569
Qatar Mobile Number: +97433219239
Character References
Virginia Lee Santos
5’7” in height and weighing 130lbs
Civil Status: Married
Cell phone Number: +63930-1624569
Qatar Mobile Number: +97433219239
Character References
Virginia Lee Santos
Technician Level III
at SMT
Location :
Saudi Arabia
Technician Level II
at SMT
Location :
Saudi Arabia
Equipment Technician Level I
at SMT
Location :
Saudi Arabia
YAMAHA YVL88X/YVL88II/YG100X/YG200 (Chipmounter SMT Machine) Basic Operation, Maintenance and Programming
Integrated Microelectronics Inc., LTAI Binan Laguna Philippines.
Integrated Microelectronics Inc., LTAI Binan Laguna Philippines.
Maintenance/Electrical Technician
(LISEC) Machines
Qatar glass Industries
Street 53 gate 07 Industrial Areas
Qatar glass Industries
Street 53 gate 07 Industrial Areas
Production Engineer
at Jay Jay Paragas Mendoz
Al-fanar Electrical System Riyadh K.S.A
Share on Facebook
Share on Twitter
Share Via Email