John Phillip Astrologo Ruidera

•Prepare presentation sketches/ model /3d presentation for the project at hand
•In change for the preparation working drawing for municipality approval
•In charge of design changes which the client requires.
•Review and Ensure that all the contract documents is being followed by the builder/ Contractors.
•Ensure that the architect’s design is delivered by the contractor and is responsible for dealing with any on-site design problems that arise.
•Ensure and Review that all municipality code, regulation and standard are being followed in design and construction stage.
•Provide support to SPM and PM to ensure projects run smoothly in areas of architecture by providing expert knowledge and advice.
•Clarification about the design and specifications by responding to RFI’s (Request for Information) which are initiated by the builder/ Contractors.
•Ensure proper Coordination of Architectural, Civil and MEP in term of design and execution on site.
•Review General Arrangement plan, Shop drawing and Detail drawing which is submitted by the builder/ Contractors for Approval.
•Review and in charge of the approval for Issued for construction (IFC) drawing.
•Prepares architectural details as and when required for execution of works.
•Addresses any modifications such as Design Change Request and Field Change request, desired by Client in coordination with Design Architect.
•Assists Project manager in review and selection of architectural materials are in compliance with approved material submittals and Sample. Issues all architectural correspondences.
•Attends progress review meetings and coordination meetings to assist Resident engineer/team leader in resolving any site issues such as discrepancies in project’s drawings.
•Review all change order made by the client and ensure to implement at site.
•Prepare working drawing for design changes.
•Conducting Factory Assessment test for prequalification of manufacturer and fabricator purposes in coordination with material engineer.
•Review and approval of method statements for architectural.
•Acceptance of all material delivery at site for architectural in coordination with material engineer.
•Conducting Site inspection for ITR approval.
•Ensure that all work to be done at site is as per Approved Material Submittal and following the approved method statement.
•Issuance of Nonconformity report (NCR)/ Field Observation Notice(FON) if contract, approved shop drawings, approved materials, approved method statement, Municipality code and standards and safety procedure are not followed at site.
•Closet out of NCR and FON.
•Snag list
•Preparing progress reports.
•Preparing inspector monitoring sheets.
•Highlights any violations to architectural related issues on site.
•Conduct necessary testing at site which is required as per project specification and requirements.
•Coordinate with contractors for any requirements needed at site.
•Review and approval of As-built drawings

•Review and Ensure that all the contract documents is being followed by the builder/ Contractors.
•Ensure that the architect’s design is delivered by the contractor and is responsible for dealing with any on-site design problems that arise.
•Ensure and Review that all municipality code, regulation and standard are being followed in design and construction stage.
•Provide support to Resident engineer/team leader to ensure projects run smoothly in areas of architecture by providing expert knowledge and advice.
•Clarification about the design and specifications by responding to RFI’s (Request for Information) which are initiated by the builder/ Contractors.
•Ensure proper Coordination of Architectural, Civil and MEP in term of design and execution on site.
•Review General Arrangement plan, Shop drawing and Detail drawing which is submitted by the builder/ Contractors for Approval.
•Review and in charge of the approval for Issued for construction (IFC) drawing.
•Prepares architectural details as and when required for execution of works.
•Addresses any modifications such as Design Change Request and Field Change request, desired by Client in coordination with Design Architect.
•Assists Resident engineer in review and selection of architectural materials are in compliance with approved material submittals and Sample. Issues all architectural correspondences.
•Attends progress review meetings and coordination meetings to assist Resident engineer/team leader in resolving any site issues such as discrepancies in project’s drawings.
•Conducting Factory Assessment test for prequalification of manufacturer and fabricator purposes in coordination with material engineer.
•Review and approval of method statements for architectural.
•Acceptance of all material delivery at site for architectural in coordination with material engineer.
•Conducting Site inspection for ITR approval.
•Ensure that all work to be done at site is as per Approved Material Submittal and following the approved method statement.
• Issuance of Nonconformity report (NCR) if contract, approved shop drawings, approved materials, approved method statement, Municipality code and standards and safety procedure are not followed at site.
•Closet out of NCR.
•Snag list
•Highlights any violations to architectural related issues on site.
•Conduct necessary testing at site which is required as per project specification and requirements.
•Coordinate with contractors for any requirements needed at site.
•Review and approval of As-built drawings

•In charge and supervise the preparation of Conceptual and Design Drawing for Approval of the Client and Project Management Consultant (PMC) for Architectural, Civil, Structural, Electrical, Mechanical, Plumbing and Sanitary System, Fire Protection System, Utilities, Pipe Laying, Telecommunication, Security System, Rail Signaling, Track Alignment, Road and Bridges.
•In charge and supervise the preparation of Construction Drawing for Architectural, Civil, Structural, Electrical, Mechanical, Plumbing and Sanitary System, Fire Protection System, Utilities, Pipe Laying, Telecommunication, Security System, Rail Signaling, Track Alignment, Road and Bridges.
•In charge and supervise the preparation of As-built Drawing for Architectural, Civil, Structural, Electrical, Mechanical, Plumbing and Sanitary System, Fire Protection System, Utilities, Pipe Laying, Telecommunication, Security System, Rail Signaling, Track Alignment, Road and Bridges.
•Supervised the preparation of all Coordination Drawing for Architectural, Civil, Structural, Electrical, Mechanical, Plumbing and Sanitary, Fire Protection System, Telecommunication and Security System.
•In charge for the preparation and strict implantation of Cad Manual Procedure, Shop drawing submission procedure, As built drawing procedure and Cad exchange procedures.
•In charge of preparing of all technical solution such as method of construction for resolving design issues which affect work in progress.
•Design technical solution for site support.
•In Charge for review of the governing Rules and regulation as per UAE law.
•In charge for review all drawing Documents in the project if it’s following as per contact or in the right standard.
•In charge in obtaining design approval, and NOC to Stakeholder which will affect the project such as ADDC, ADWEA, ADSSC, Etisalat, Du, Military, ADCD, GASCO, TAKREER, ADCO, AL HOSN, DOT and WRM.
•Review of specification and procedures.
•In Charge for the review and approval of all Shop drawings, Bar Bending Schedule (BBS), General Arrangement Drawing, Plans, Section, Structural Drawing and detail design drawing Submitted by the Sub-contractors and Suppliers.
•In Charge for the review and approval of Design Change Request and Field Change Request Submitted by the Sub-contractors.
•Site Inspection.
•In Charge for the approval of all as-built drawing submitted by the sub contractor.
•In charge for the As built close out phase of the project.
•In charge of Coordination Between Design Team of Abu Dhabi Head Office to Remote Site Office.
•Coordinate all drawing to the Engineers, consultant, and contractors.
•Coordinate, Distribute and compile all CAD, Word and Excel documents.
•In Charge in Compiling and updating latest Design Drawing to the Database to insure All Documents are up to date.
•Responsible for all the Cad Drawing in the project for outgoing documents to / from the PMC or Client and Subcontractor.

•Design, Supervised, and Prepare shop drawing, as-built, for telecommunication system such as Public Address System (PAS), Narrow Band Radio (NBR), Passenger Information System (PIS), Time Display System (PIS) and Telephone Network (TN).with considerations including quality, manufacturability, cost, agency requirements, fit, form and function as well as meeting precise aesthetic design intent.
•Design, Supervised, and Prepare shop drawing, as-built, security system such as Close Circuit Television (CCTV) and Intrusion Alarm System. (IAS) with considerations including quality, manufacturability, cost, agency requirements, fit, form and function as well as meeting precise aesthetic design intent.
•Design, Supervised, and Prepare shop drawing, as-built, Telecommunications and security system including Block works and Cable routes.
•Preparing Wiring Diagram and schedule for both Security and Telecommunication System.
•Design, Supervised, and Prepare Equipment layout such as Rack detail and Rack Layout.
•Design, Supervised, and Prepare combine Shop Drawings.
•Design, Supervised, and Prepare Full detail drawing for site Installation.
•Design, Supervised, and Prepare technical solution resolving design issues which affect work in progress.
•Site Inspection for Installation purposes and for As-built.
•Supervised and Prepare As-built Documents in CAD, Excel Format and Word such as Drawing layouts, Wiring Diagrams, Wiring Schedules, and Equipment layout and Wiring Schedules.
•Coordinate drawing to the Engineers, consultant, and contractors.
•Final site inspection for installation and As-built.
•Coordinate, Distribute and compile all CAD, Word and Excel documents.
•Weekly Coordination meeting with Project engineers, Consultants, contactor for resolving design issues which affect work in progress.
•Making weekly Progress Report
•Making weekly Discrepancy documents for snag list.
•Check Documents and detailed drawings created by Cad Department.
•Create and update database of design records for future reference purposes
•Review design layouts to find and resolve problems involving compatibility with basic design concepts.
•Perform job responsibilities with minimal supervision and with the utmost sense of urgency

•In charge and supervise the preparation of Design Drawings for Architectural layout, Civil layout, Structural layout, HVAC layout, Power layout, lighting layout, Storm Drainage, Potable water supply layout, Sewage layout, Fire Protection layouts, Telecommunication layout, Medical gas layout and Pneumatic tube Layout.
•In charge and supervise the preparation of For construction drawing for Architectural layout, Civil layout, Structural layout, HVAC layout, Power layout, lighting layout, Drainage, Potable water supply layout, Fire Protection layouts, Telecommunication layout, Medical gas layout and Pneumatic tube Layout.
•In charge and supervise the preparation of coordination drawing for Architectural layout, Civil layout, Structural layout, HVAC layout, Power layout, lighting layout, Drainage, Potable water supply layout, Fire Protection layouts, Telecommunication layout, Medical gas layout and Pneumatic tube Layout.
•In charge in the preparation and strict implantation of Cad Manual Procedure, Shop drawing submission procedure, As built drawing procedure and Cad exchange procedures.
•In charge and Reviewing all drawing Documents in the project if it’s following as per contact or in the right standard.
•In charge for Reviewing and approval Sub Subcontractor’s Shop drawing, Coordination drawing, single line diagram and other design Submittals.
•In charge in the preparation a Design Change Request and field change request.
•In charge of obtaining approved Construction drawing and change request from the client and project Management Consultancy ( PMC )
•In charge in the preparation of Drawing for site Support.
•Site inspection.
•Site Coordination with Subcontractor, supplier client, Consultant and Engineers.
•Coordinate Approved Drawing to Engineers, sub-contractor and site supervisors.
•Create and update database of design records for future reference purposes.

•Assisting client to interpret their space requirements and preparing plans for the primary approval.
•Assisting with conceptualization of the project such as concept, space planning, and space requirements.
•Preparing Preliminary Sketches and diagrams for Floor plans.
•In charge in the preparation of construction drawing such as Architectural floor plans, Elevations, Sections, Materials and Finishes, Civil, Electrical and Plumbing Layout.
• Preparing Initial Specifications, Estimate, Bill of Quantity and Pert/CPM.
•Represent Architect and designers for site inspection if the specification and plans are properly followed at site.
•Reviewing law and codes for Project In hand.

•Preparing Architectural, structural, Electrical, and Plumbing Layout for a Residential Building.
•Prepare Detail drawings.
•Prepare Perspective and Miniature scale model.