SUPER DUPLEX WELL JUMPER CONSTRUCTION.
Friedlandder Congo
Total years of experience :7 years, 2 Months
Company: TOTAL Energy & Petrol Congo.
Contractor: AKER SOLUTION.
Subcontractor: Friedlander Congo.
Position: QA/QC Engineer.
Duties:
Welding Procedure qualification
Welder qualification
Review and approval of welding books: WPS, PQR, WQ, NDT reports.
Ensuring compliance with QA standards and Procedures.
Elaboration and approval of the Inspection and Test Plan (ITP).
Verify correct use of approved WPS during production.
Verify approved welding consumables are used, and verify inter-pass temperatures as per WPS.
Inspect the Welding to be employed on Site and the qualifications of the welders operating within the plant, according to Project Specifications and Standards
Surveillance inspection during in-process welding.
Planning and adjusting with the clients the work tasks: NDT inspection, final reception…
Witness & valid the NDT inspection.
RT review and valid the welding joint.
Participation in the meeting with the Contractors & company and solve problems during production if any.
Final visual inspection.
Final Dimensional control.
Prepare and Interpretation of KPI (key performance indicators) of welders
Flushing and cleaning witness and approval
Particle account during flushing
Hydro-test procedure witness and approval
Manage of quality team on site
Evaluate performance of welder
Implementation of quality data record at site to maintain traceability of such works and
Daily Progress Report, Weekly Progress Report.
Conduct Pre Inspection meeting, Weekly meeting, internal QA/QC meeting
Participation in the meeting with the Contractors & company and solve problems during production if any
Company: CHEVRON.
Contractor: SUBSEA 7
Subcontractor: Friedlander Congo.
Position: Welding & NDT quality supervisor.
Duties:
Reception material Inspection and conformity with specifications and certificates.
Verification of piping spool’s isometric.
Resolution of the modification.
Coordination for the piping supports fabrication and erection.
Review and approval of technical files of manufacturing.
Review and approval of welding books: WPS, PQR, WQ, NDT reports.
Welding Procedure qualification (Carbon Steel).
Welder qualification according to (ASMEIX, AWSD1.1…)
Verify correct use of approved WPS.
Ensuring compliance with QA standards and Procedures.
Verify approved/correct welding consumables are used, as per consumable handling procedure and verify preheating and inter-pass temperatures as per WPS.
Inspect the Welding to be employed on Site and the qualifications of the welders operating within the plant, according to Project Specifications and Standards.
Surveillance inspection during welding qualification and post welding.
Final visual Inspection.
Planning and adjusting with the clients the work tasks: NDT inspection, final reception.
Monitoring the development of the works.
Interpretation of radiographic film.
Elaboration and approval of the Inspection and Test Plan (ITP).
Witness Repair if any (checking welding parameters, preheating temperature, Feed speed, Energy…).
Monitoring the development of the works.
Participation in the meeting with the Contractors & company and solve problems during production if any.
Hydrostatic test witness.
Prepare and Interpretation of KPI (key performance indicators) of welders.
Preparation of daily reports.
Preparation of weekly reports.
Company: STEG
Contractor: ANSALDO Energia.
Subcontractor: SOCOMENIN
Location: Tunisia
Position: QHSE Manager for SOCOMENIN.
Duties:
Review all related documents and approve Procedures before and after welding consisting of: Code, Standard, Spec, ITP, Dimensional/Gauging procedure, drawing, Traceability material, coating & painting procedure.
Receipt Coil material and verification the heat number, coil number and visual inspection,
verification and identification including consumables, WPS, PQR and WQR
Witness, monitoring, verification and implementation of approved WPS consisting of equipment/welding machine, Root gap, misalignment and offset for weld preparation.
Witness and monitoring of the application of approved WPS during weld process consisting of applied consumables electrodes, fluxes, shielding gases including welding parameter: voltage, ampere, travel speed and inter pass temperatures during weld overlay clad.
Visual inspection of the finished weld including verification for the testing implementation as required NDT,
Reviewed all the documents process to ensure the acceptance criteria meet Code, Spec or Standard requirement and endorsed
Visual and dimensional inspection on production,
Witness and monitoring of the application of approved coating & painting procedure.
Witness daily welding repair, if any,
Daily and weekly report preparation.
Position: Integrity Assurance & Inspection Engineer
Duties:
process, plant, vessels, pipe work and structures to support enhancement of the asset integrity
Assurance programs.
Provide scope for Dead legs inspection and Turnaround preparation.
Provide performance management of Inspection Contractors with ongoing review and periodic audit of personnel competency and inspection activities undertaken for compliance with procedures.
Support Operations in preparation for acceptance of Construction works by witnessing of key inspections/tests and review for completeness of plant inspection and certification dossiers prior to commissioning.
Resolving all the modifications on field.
Control and follow up of the subcontractor’s activities.
Management & follow up of the NCRs.
Supervision and control of the erection activities of the Turbo group (Diffusor; Gas Turbine; Generator; Steam Turbine; Air intake system &Condensor).
Dimensional; Bolting; Tightening & Verticality controls of the steel structure.
Welding, Sandblasting and painting Inspection of the steel structure.
Dimensional; Welding; Sandblasting; hydrotest and painting controls of Tanks.
Dimensional; welding, Sandblasting & painting control of the condenser.
Welding Inspection of the casing and outlet duct of the boiler.
Control of erection and welding activities of the different parts of the boiler (RH; SH; Economisor; collectors, casing).
Coordination of NDT controls (programs, reports & follow up).
Review of Final documentation.
Prepare Inspection plan of storage tanks (bottom scan MFL, Shell VT & UT, Roof MFL…)
Evaluate the status of storage tanks ( corrosion rate, remaining life, next inspection date …)
Preparation of a specific procedure for a Partial annular ring repair according to API 653.
Elaborations of a method statement for Bottom patch plate inserting according to API 653.
Elaboration of a Specific procedure for the Bottom coating and application of GRP according to API 652.
Monitoring the implementation of Quality Control Manual and Quality Policy.
conduct Welder Performance Qualification and Welding Procedure Specification Qualification
Review & approval of inspection procedures:
Control material used on fabrication and make sure all the material are traceable and accepted.
Quality Control supervision & welding inspection of storage Tanks repair.
Evaluate performance of each Welder to minimize welding repair and keep the welding quality meet the requirements
Implementation of quality data record at site to maintain traceability of such works and materials
prepare Daily Progress Report, Weekly Progress Report
Conduct Pre Inspection meeting, Weekly meeting, internal QA/QC meeting
Prepare Inspection plan of storage tanks (bottom scan MFL, Shell VT & UT, Roof MFL…)
Evaluate the status of storage tanks ( corrosion rate, remaining life, next inspection date …)
Preparation of a specific procedure for a Partial annular ring repair according to API 653.
Elaborations of a method statement for Bottom patch plate inserting according to API 653.
Elaboration of a Specific procedure for the Bottom coating and application of GRP according to API 652.
Monitoring the implementation of Quality Control Manual and Quality Policy.
conduct Welder Performance Qualification and Welding Procedure Specification Qualification
Review & approval of inspection procedures:
Control material used on fabrication and make sure all the material are traceable and accepted.
Quality Control supervision & welding inspection of storage Tanks repair.
Evaluate performance of each Welder to minimize welding repair and keep the welding quality meet the requirements
Implementation of quality data record at site to maintain traceability of such works and materials
prepare Daily Progress Report, Weekly Progress Report
Conduct Pre Inspection meeting, Weekly meeting, internal QA/QC meeting
electro-mechanical Engineer with 08 years Experience in Oil, Gas & Power Project, I'm certified CSWIP 3.1 "International welding Inspector", certified API 653 "Authorized storage tank Inspector" , Certified API 570 "Authorized piping Inspector" , certified API 510 "Pressure Vessel Inspector". Level II VT (Visual Inspector), MT (Magnetic Particle testing Inspector), PT (Penetrant Testing Inspector), RT(Radiographic testing inspector) & RFI (Radiographic film Interpretor). as well I'm lifting equipment inspector, electrical installation Inspector, Cathodic protection inspector & Fire Fighting inspector Fluent English & French, EPC project Realization Company, familiar with the modification of PFD's, P&ID's, development of Plot Plans, General Arrangements and Isometrics. Well conversant with International Codes & Standards like ASTM, NACE, ASME Sec. I, IIA, B, C & D, V, VIII Div. I & II, IX, B 31.1, B 31.3, B 16.5, AWS D1.1, API 570, API 653, API 510, API 579, API 598, API 580…etc.