لويسيتو اوبيريو

Activities:
• Provide guidance to all Projects staff and Projects Managers on all HSE related rules and procedures to assist
them ensuring all work in a healthy and safely work environment and minimize injuries and damages in
addition to guidance on all HSE Legal requirements and CoPs.
• Advise all levels on safety and health regulatory compliance requirements.
• Ensure the completion of risk assessments (all types) in areas of responsibility and follow up on corrective
action.
• Review and sign off all accident investigation / high potential near miss incident reports and ensure follow up
action has been taken and ensure that all procedures and policies are complied with.
• Review of contractor’s transmittal of documents related to HSE.
• Coordinate lesson learnt sessions in area of responsibility.
• Coordinate with the relevant Manager of the Contractors to ensure that to follow Safety, Health, and
Environment Management System.
• Conduct formal and informal inspections.
• Review & Provide KPI trend analysis for project in areas of responsibility.
• Disseminate and awareness all safety-related material such as Standards, Newsletters, Policies and
Procedures, etc.
• Planned Audit according to HSE & Legal Audit Requirements
• Interview and approve HSE Staff being assigned for the project by Contractors.
Projects:
• UNIMAC: Construction of OXAGON village retaining wall
• SAMA: Design and Construction of Secondary substations (33kV/13.8) to distribute power from the 33kV power lines
to the 13.8kV power which are fed by the 32kV/33kV Primary PSSs, by delivering reliable and stable power to the
downstream loads (Commercial, Residential, Industrial) within OXAGON Sitewide.
• ARANER: Design, Engineering, Manufacturing, Procurement, Construction, Erection of Process Equipment’s, MEP
works. Cold side and heat exchangers of the ETSs.
• HIDC2 (ThyssenKrupp) - Methanol and Methanol to Gasoline Demo Plants: Construct, Test, Commissioning and Start
up the MeOH Facility.
• ABYATONA: Construction of the Central Utility Corridor of OXAGON Village.

Nov. 28, 2021 - March 14, 2025: Lead HSE - PMT / PMC at Saudi Aramco / Khatib & Alami
Projects:
• King Salman International Complex for Maritime Industries & Services
• Construction of Offshore Rigs & Facilities (Pkg6), Ship Building (Pkg5) & Ship Maintenance (Pkg4).
• Transportation, Construction, Installation & Commissioning of Heavy Equipment’s:
o Heavy Cranes:
 Goliath 1600 Tons & 500 Tons, Portal Single Boom, Gantry, Semi Gantry, Bridge ‘s, Jib and Tower Cranes.
o CNC Machines:
 Gas & Plasma Cutting, Pipe Bending, Steel Plate Bending, Shearing, Gantry planer, Plate Joining Gantry, Hydraulic press, Rolling machine, Welding machine, Welding Manipulator Equipment, RC edge mill cutter, and Horizontal & Vertical Lathe machines.
o Conveyor, Winches & Carriages:
 Electric flat carriage, Hydraulic Driven trans Pulling Winch, and Stopper Lifting Equipment
o Treatment & Assembly Line Process:
 Pretreatment equipment, Wastewater Recycling machine, and T-bar assembly line profile assembly

Projects:
• Saudi Aramco Distribution Projects Division-DPD: Jubail Ras Tanura Pipeline Project, BRT-5
• Saudi Aramco Onshore Maintaining Potential Projects Dept: New Safaniyah 24” HDPE Water Disposal Pipeline
• Saudi Aramco Onshore Maintaining Potential Projects Dept: Safaniyah 12” HDPE
• SA OMPPD: New Over Head Power Line Scope BI-11-20000-0446 TIE-IN SFNY WD 733-734-735 13.8kV
Activities:
• Organization H.S.E. functions at a Project level.
• Implementation of Job Safety Analysis
• Implementation of Task Specific Analysis
• Understand & Implement H.S.E. requirements of the Project and Local laws and ensure compliance
• Institute proper investigation and reporting methods.
• The planning of Inspection and monitoring activities.
• Assignment of personnel and the initial review of reports and documentation.
• Monitoring Project Health and Safety performance and Project
• Formulation of project specific H.S.E. Plans.
• Identification Plans, Emergency Response Plans, Work Instructions, and other documents that may be required to ensure a Safe and Healthy Work Environment.
• Evaluate compliance levels and initiate Corrective and Preventive Actions to improve performance.

Projects:
•Construction, Commissioning & Operation of Jazan Oil Refineries High Voltage Substation
•Construction, Commissioning & Operation of Integrated Gasification Combined Cycle (IGCC) Power Plant High Voltage Substation
Activities:
•Ensure Aramco Safety Management System requirements are communicated and implemented at their areas
•Conduct regular field visits/observations to check and verify employees and contractors comprehension of own safety roles and responsibilities.
•Highlight safety roles and responsibilities during divisional safety meetings, as applicable
•Promote awareness and share new safety requirements with all personnel.

Saudi Electricity Company ) SEC- HQ, Granada Area, Riyadh Saudi Arabia
HSE (Health Safety And Environment) Specialist - Consultant
Activities:
* Make contact with Manager(s) of areas of responsibility, once per week.
* Meet with each Manager in their areas of responsibility, monthly.
* Meet with Safety & Environmental Prevention Division Manager / Section Head matters once per
week.
* Write monthly report on the status of the SEC 5-Star Safety, System for each department in areas
of responsibility and circulate to the concerned Management and Safety & Environmental
Prevention Division Manager / Section Head.
* Coordinate and ensure the implementation of the SEC 5-Star Safety System in their respective
departments and / or areas.
* Conduct 6-monthly audits using all elements of the Saudi Electricity Company 5-Star Safety and
Health System.
* Participate in other 5-Star audits as requested.
* Keep maintain the 5-Star Safety System element files in their areas of responsibility. (Soft and / or
hard copies)
* Coordinate and participate as a resource in Safety and Health Committee meetings.
* Assist actively in disabling (lost-time) injury, property damage accidents and high-potential
near-miss incident investigations.
* Advise all levels on safety and health regulatory compliance requirements.
* Work with Safety and Health Representatives, Managers, Supervisors, Contractors and Employees
in areas of responsibility to ensure proactive safety goals are met. (As per the 5-Star Action Plan)
* Ensure the completion of monthly risk assessments (all types) in areas of responsibility, and
follow up on corrective action.
* Devise, implement, and follow up safety suggestion / observation / near miss reporting schemes
for areas of responsibility.
* Monitor SEC goals as per the (5-in-5) 5-Star Safety and Health Management System Action Plan.
* Monitor 5-Star Safety and Health System compliance in areas of responsibility and report
deviations to concerned management.
* Review and sign off all accident investigation / high potential near miss incident reports and
ensure follow up action has been taken and ensure that all procedures and policies are complied
with.
* Coordinate incident recall sessions in weekly meeting of area of responsibility.
* Test, and document deviations of critical systems, weekly, Examples include:
o Lock - out, tag - out procedures
o Work Permit, Permits (confined space, hot work … etc.)
o Lifting gear
o Fall protection
o Contractors control
o Work environmental control measures
* Coordinate and conduct employees and contractors safety training, and maintain required
documentation.
* Coordinate with the relevant Manager of the Contractors to ensure that follow 5-Star Safety and
Health Management System.
* Support departments in identifying their critical tasks and help in the writing of the Critical Task
Procedures.
* Conduct formal and informal inspections at least monthly. (See Element 5.16 Workplace
Inspections)
* Perform one Planned Job Observation (PJO) per week (critical task) with Supervisor(s) in areas of
responsibility.
* Provide graphs for departments in areas of responsibility, and be knowledgeable and responsible
for the accuracy of the following information:
o Disabling injury incidence rate
o Disabling injury severity rate
o Accident ratio
o Property damages
o Near-miss incident reports and follow-up actions (pie charts)
o Housekeeping competition scores
o Number of observations reported
* Assure that all safety and health related reports (as required) are completed in a timely manner.
* Disseminate and awareness all safety-related material such as Standards, Newsletters, Policies
and Procedures, etc.
* Be an active member in emergency service drills and exercises.

Standardized Health & Safety signage’s that includes local language but corresponds to
International signs & symbols
* Reduce cost of the materials used in signage’s by implementing different material with less cost
* Completed training on staff for 2011 regarding ABB Behavioral Safety Program such as : “RU Safe
Training”
* Regularly conducting ABB OHS orientation for new staff
* Conducting ABB Blue collar mandatory integrity training for Blue Collar Workers.
Activities:
* Safety Engineer / Advisor in ABB Project at :
o Princess Noura University For Women
o Al-Kharj Project Site
o Tawdihiyah SEC / ABB Project
o Eastern Region (Al-Mujran, Al-Khour & Al-Khalidiyah) SEC / ABB projects
o Wasit 380/240kV Gas Plant (Aramco/SEC/ABB Projects)
o Automation Factory in 2nd
Riyadh Industrial City
* Conduct risk assessment and hazard analysis on the given project site
* Review contract documents & methods statements related to the project for safety issues
* Review and approved site sub-contractors safety related documents and programs
* Approve/Disapprove sub-cons safety nominated personnel for safety positions
* Coordinate with project manager, safety heads and operation management regarding safety
related issues at site
* Participate in meeting with sub-contractors and clients for safety matters on project site
* Conduct evacuation and emergency drill on ABB project sites and offices
* Conduct safety inspection on scaffolding and other safety related equipment’s
* Support compliance and assurance in the site operational activities with regards to Health &
Safety Management systems in accordance to OHSAS 18001:2007 requirements
* Implement ABB OHS system to the assigned projects and establishment of ABB Saudi Arabia
* Train ABB employees and its contractors on Occupational Health and Safety topics and
programs
* Assess and recommend to the management training requirements on Safety and health
* Conduct Safety Audit and inspection on ABB Saudi Arabia assigned project site

Award: “ATP -ESH OHSAS 18001 Success Audit Award”
Activities:
* Represent department in ISO 14001 activities/meeting
* Represent department in OHSAS 18001 activities/meeting
* Ensure that ISO 14001 and OHSAS 18001 requirements are established, implemented and
maintained in the department
* Plan and develop the ESH program for ATP
* Direct the incident/accident prevention efforts of ATP in accordance with the ESH program, ESH
performance and government regulations in order to minimize and eliminate, wherever possible,
incidents/accidents from occurring in the workplace
* Conduct/attend ESH meetings
* Review reports of inspection, incident/accident investigation and implementation of the ESH
program
* Submit ESH reports to his department manager on ESH meetings and activities
* Provide assistance to government inspecting authorities in the conduct of the latter’s activities
* Initiate and supervise ESH training for his department

Standardized Material Unit of Measure to SAP system through project management, this is
beneficial in accurate standard usage calculation
* SAP system knowledgeable and used to standardize material usage calculation
* Reduce Dead Stock through Inventory Analysis
* Improve Material standard usage accuracy which is pre-requisite to improve cost.
Activities:
* Conducts time study on various production processes to establish standard manufacturing rates
for production planning and scheduling
* Establishes & updates standard material consumption rates to maximize utilization of resources
at optimum cost.
* Develops new or modifies existing work methods to enhance productivity by eliminating
irrelevant methods and procedures (non-added value activities).
* Reviews layout on various work station and offices and develops the most appropriate
arrangement of machines, equipment, furniture and fixtures to ensure systematic and efficient
flow of materials, people and work.
* Coordinates with various departments (i.e. Facilities Engineering, Equipment Engineering, and
Information & Communication Service) in the implementation of effective machine and work flow
layout.
* Designs production jigs and fixtures to improve material handling capability of production
personnel and improve efficiency and productivity level.
* Establishes & maintains the Activity-Based Costing System to provide the standard cost of each
product.
* Reviews manpower and machine capacity in order to make recommendation for a well-balanced
and synchronized production.
* Ensures enforcement of established systems, layouts and standards / lay out designs conforms to
the safety & environment al requirements of the company.
* Conducts studies on cost reduction with emphasis on eliminating waste, finding alternative tools
and materials, modifying / upgrading equipment and fixture and simplifying work method without
sacrificing quality, yields and turn-time. Monitors resources of ATP, so that it is utilized in a
productive way.

Award: “Sikap Award as Cost Controller”

Achievements:
• Improve cost, through implementation of cost reduction program such as: used of alternative material as set-up, pot life extension & others.
• Attainment of TPM goal through variance analysis
• Improve productivity indicator.

Activities:
• Responsible for analyzing the Assembly Operations Financial
performance implementing control of division assets, providing financial tools such as projection / cost models which aid in financial decisions, and furnishing reports regarding forecast and forecast trend.
• Responsible for implementing TPM practices and Manufacturing Self Audit systems in the line.

Responsible in Planning the Production line
* Responsible in motivating people to work effectively and efficiency to achieve companys
objective.
* Maintain Discipline, Orderliness and cleanliness in the line.
* Gives immediate feedback to Sr. Supervisor / Manager whenever problem arise on the line.
* Make control points to gauge line performance.
* Provide suggestion for a better work / factory layout
* Performance management
* Implement Manufacturing standards
* Included in discussion for a better methods implementation
* Assist operator and recommend techniques for work improvement
* Resource optimization
* Monitors, controls and updates Operators in work related items such as Productivity, Quality
Yield and Material.

• Monitors, Controls and Updates Technicians in work related items such as Productivity, Quality Yield and Machine
Downtime.
• Responsible in Planning Activities to support operation.
• Controls and monitor the use parts and tools of the
equipment in order to sustain operations need.
• Assist Technician and recommend techniques for work
improvement.