Freelance Designer
NA
مجموع سنوات الخبرة :8 years, 8 أشهر
Structural Designing of 18m x 18m house which would going to build in Philippine and used STAAD for this.
Analysis and Designing of floor area to be reconstructed for glass floor by STAAD. It was in Arabic villa in Dubai, UAE.
Architectural planning of 425 sq. ft. area which will be used for commercial purpose by AutoCAD.
Designing and Detailing of whole structure (for above mentioned area) by STAAD.
Preparation of Bill of Quantity (B.O.Q).
Project name: Road Maintenance of Deira 2 (RMDII)
Project function: Maintenance of road structures and provide safe and smooth
transport for all
Project cost: AED. 87, 661, 917.01
Project duration: 1826 days
Work and Responsibilities: -
* Make schedule of inspection and corrective maintenance for road structures (such as:
Bridges, Underpasses, Pedestrian Footbridges, Camel Underpasses, Subways, Culverts,
Retaining wall/Soil wall, Abra Landing Steps, Drainage Pump Station and Fire Pump
Stations). And submit to RTA.
* After getting approval from RTA RSFM department, we carried out the full inspection of
road structures with ourselves or with RTA Engineers.
* As per the given RTA format, we make the full report of each structure on daily basis,
monthly basis, quarterly basis and annually, then submit to RTA.
* Structure report consist of defects with photos, method statement and BOQ.
* RTA issued work order to repair the defect/s.
* Mostly we have work on road areas. Our road closure team closed the road for us, then
we carried out the repair work.
* Before conducting of work, we attained the safety meeting on daily basis.
* We have permitted to close the road from 1:00 am to 5:00am (4 hours only), due to
short interval of time we need to make the well set plan of the work.
* Make joint measurement sheet (JMS) and submit to RTA.
* Carried out the inspection of repaired work along with RTA Engineer and get the
approval.
* After satisfaction of RTA Engineers and some other formalities, RTA releases payment.
Project Size: G+4P+25+R+UR
Consultant: Sharjah Engineering Consultant
Work and Responsibility: -
* Read and analysis of working drawings using AutoCAD.
* Estimate the quantity and dimensions of different structural components (Shear wall,
column, partition wall, lift shaft etc) using AutoCAD.
* Update the calculated data in pre modified excel sheet (having unit rates of various
building materials, labors and equipment.
* Prepare contracts and documents.
* Carried out the quantity surveying for false ceiling work of the same project.
Project name: White House
Client: Mirza Farrukh Baig and Shahida Hussain
Design Consultant: Architecture Atelier Kanpur (U.P) India
Project function: Construction of Residential Building G/P+11 Story
Project cost: 110 million INR.
Project size: 640 Sq. m (Built up Area)
717 Sq. m (Plot Area)
Work and Responsibility:
* Maximum team size handled, 10-20 persons.
* Before conducting of work, I checked the safety of workers on daily basis.
* Checked the layout of building with respect to existing structures and site levels.
* Carried out the quality test of RMC - slump test and compressive strength test.
* Carried out construction of foundation - excavation and shoring, ramming,
PCC/blending, water proofing, screeding, steel fixing and casting concrete upto column
neck.
* Site supervision of daily construction activities as per the project technical specification
and IFC drawings.
* Sort out any technical issues in IFC drawings, by discussing them with client and
consultant.
* Support and supervise daily skilled and unskilled workers and give them useful instruction
regarding their work improvement, through coordination with the relevant skilled staff.
* Find the execution problems and solve it through my knowledge and experience with
the suitable solutions.
* Monitored all construction activities - formwork, steel fixing, concreting and curing.
* Inspecting materials prior to their use at site against the control sample approved by the
client.
* Coordinate with subcontractors for work smoothness and provide technical support for
contractor
* Report to the Project Manager about the current work progress and make comparison.
* Preparing routine reports such as- Work status, Labour reports, Work timeline reports,
Purchase requisitions.
* Carried out the finishing process for exterior and interior such as plastering, tiling,
painting, itching, grinding of base slab, Stone fixing and rubbing.
* Book keeping of whole project.
ADDITIONAL WORK
* Structural Designing of 18m x 18m house which would going to build in Philippine and
used STAAD for this.
* Analysis and Designing of floor area to be reconstructed for glass floor by STAAD. It was
in Arabic villa in Dubai, UAE.
* Architectural planning of 425 sq. ft. area which will be used for commercial purpose by
AutoCAD.
* Designing and Detailing of whole structure (for above mentioned area) by STAAD.
* Preparation of Bill of Quantity (B.O.Q).
Project workouts:
* Learnt about various materials which increase the friction between corresponding soil
and pile.
* We conclude that bearing capacity of pile will increase, by increasing the friction.
Hence, the length of the pile will reduce and make it more economical.
Project: Project name: Increasing bearing capacity of Pile Foundation Duration: November 2014 - May 2015 Project Coordinator: Prof. DEVESH JAISWAL (IEC College of Engg & Tech - Gr Noida) Project workouts: - Learnt about various materials which increase the friction between corresponding soil and pile. We conclude that bearing capacity of pile will increase, by increasing the friction. Hence, the length of the pile will reduce and make it more economical. Internships: Designation: Engineering Intern Company: M/s MBL-Supreme (JV), New Delhi Client: Delhi Metro Rail Corporation (DMRC) Duration: 09th June - 08th July, 2014 Area to be learned: - Construction of Metro depot cum workshop at Kalindi Kunj of “Delhi Metro Rail Corporation (DMRC) phase – III”. Performed various laboratory and field tests. Full understanding of concrete construction process starting from formwork, reinforcement, concreting. Lookout the construction of building frame (Beams and Columns) Learned how to interpret the drawing and execute the work accordingly. Got knowledge of construction planning and scheduling of work. Got knowledge of cast-in-situ pile pile foundation. Took brief knowledge of well foundation.