Senior Electrical &Instrument Engineer
Quality & Excellence
Total years of experience :14 years, 11 Months
- Responsible of the Quality Control.
- Alternative QC manager for US army base project in Jordan.
- Support the contracting and trading sections for electrical and instrumentation works.
- Prepare Technical Submittals for Bid Submission.
- Projects Testing & Commissioning
Direct and coordinate Electrical and instrument site activity works.
Lead the electrical Team and subcontractor to achieve the excellent performance.
Verify the quality of installation and efficiently satisfies the requirements and specifications.
Perform and direct the testing and commissioning of electromechanical equipment and other
systems in regards to expected targets. (As pumping stations, chemical processes, ventilation,
solid and liquid storages systems, power generating systems, compressed air and blowers all the
electrical and control systems…..).
Responsible for the satisfactory operation of all electrical/ electromechanical and instrument
equipment as the intercommunications with the supervision system.
Company Representative towards the client, Sub‐Contractors, Staff and third parties concerned
with electrical works, and responsible to maintain a good working relationship with all parties.
Reporting the project Managers of all problems and progress, and maintain them a daily
awareness of all potential risks to the company’s objectives and progress of the works.
Record delays to the works and assists in the valuation of claims.
Assist management to Review payment with respect to site progress.
Create the E&I energization procedures, inspection test plan, inspection test report and obtain
client approval for it.
Carry out the electromechanical and instruments inspections with the consultant at the time
requested with the created supporting documents.
Responsible to manage and close all snags and comments items raised by the consultant/ client.
Assist Technically the Engineering department and review Vendor Drawings/ specifications.
Ensuring that acceptable site safety standards of the project and the company are maintained
by electromechanical team and subcontractors.
Direct and coordinate Electrical and instrument site activity works.
Lead the electrical Team and subcontractor to achieve the excellent performance.
Verify the quality of installation and efficiently satisfies the requirements and specifications.
Perform and direct the testing and commissioning of electromechanical equipment and other
systems in regards to expected targets. (As pumping stations, chemical processes, ventilation,
solid and liquid storages systems, power generating systems, compressed air and blowers all the
electrical and control systems…..).
Responsible for the satisfactory operation of all electrical/ electromechanical and instrument
equipment as the intercommunications with the supervision system.
Company Representative towards the client, Sub‐Contractors, Staff and third parties concerned
with electrical works, and responsible to maintain a good working relationship with all parties.
Reporting the project Managers of all problems and progress, and maintain them a daily
awareness of all potential risks to the company’s objectives and progress of the works.
Record delays to the works and assists in the valuation of claims.
Assist management to Review payment with respect to site progress.
Create the E&I energization procedures, inspection test plan, inspection test report and obtain
client approval for it.
Carry out the electromechanical and instruments inspections with the consultant at the time
requested with the created supporting documents.
Responsible to manage and close all snags and comments items raised by the consultant/ client.
Assist Technically the Engineering department and review Vendor Drawings/ specifications.
Ensuring that acceptable site safety standards of the project and the company are maintained
by electromechanical team and subcontractors.
*Key Responsibilities:
-Supervise all electrical and instruments equipment Energizing, starting-up, and testing during pre-commissioning and commissioning phases, and hand over to client.
- Parameterize all MV/LV protection relays (Micom, GE Multiline)and VSD(ABB, Vacon), and instruments
-Make pre-commissioning and commissioning procedures check list sheet and recordings reports of all electrical MV/LV panels, PLC, motors, VSD, UPS, and Instruments (mostly E&I)
Reporting the comments with solution to the client (technical support)
Installation checking as per design, if not, issue non-conformance report(NCR) and site discrepancy report (SDR)
- Manage field electrical and instruments installations, quantity accounting, and material purchasing
-Take responsibility for all tests during pre-commissioning and commissioning phases with client.
- Loop checking, Commissioning, and troubleshoot for :
- electrical panels (MCC, MV, PLC, VFD, UPS)
- motors,
- Instruments (Turbidity, pH, Conductivity, Level, Oil, Algae, Flow, Pressure, Temperature…...)
- Valves (PMV, Auma, InterApp …).
- Doing the field modification requirements
*Key Responsibilities:
-Supervise all electrical and instruments equipment Energizing, starting-up, and testing during pre-commissioning and commissioning phases, and hand over to client.
- Parameterize all MV/LV protection relays (Micom, GE Multiline)and VSD(ABB, Vacon), and instruments
-Make pre-commissioning and commissioning procedures check list sheet and recordings reports of all electrical MV/LV panels, PLC, motors, VSD, UPS, and Instruments (mostly E&I)
Reporting the comments with solution to the client (technical support)
Installation checking as per design, if not, issue non-conformance report(NCR) and site discrepancy report (SDR)
- Manage field electrical and instruments installations, quantity accounting, and material purchasing
-Take responsibility for all tests during pre-commissioning and commissioning phases with client.
- Loop checking, Commissioning, and troubleshoot for :
- electrical panels (MCC, MV, PLC, VFD, UPS)
- motors,
- Instruments (Turbidity, pH, Conductivity, Level, Oil, Algae, Flow, Pressure, Temperature…...)
- Valves (PMV, Auma, InterApp …).
- Doing the field modification requirements
*Al-Dur Power Water Corporation 2.7 Billion dollars combined cycle Plant (Electricity &
Water production). The biggest Reverse Osmosis ‘RO’ under construction in the Region
With capacity = 218.208 m3/Day, Contract Value = 156 M-Euro, the Engineering
Consultant = Tractebel Engineering, and our Client = HHI (Hyundai Heavy Industries)
*Key Responsibilities:
-Supervise all electrical and instruments equipment Energizing, starting-up, and testing during pre-commissioning and commissioning phases, and hand over to client.
- Parameterize all MV/LV protection relays (Micom, GE Multiline)and VSD(ABB, Vacon), and instruments
-Make pre-commissioning and commissioning procedures check list sheet and recordings reports of all electrical MV/LV panels, PLC, motors, VSD, UPS, and Instruments (mostly E&I)
Reporting the comments with solution to the client (technical support)
Installation checking as per design, if not, issue non-conformance report(NCR) and site discrepancy report (SDR)
- Manage field electrical and instruments installations, quantity accounting, and material purchasing
-Take responsibility for all tests during pre-commissioning and commissioning phases with client.
- Loop checking, Commissioning, and troubleshoot for :
- electrical panels (MCC, MV, PLC, VFD, UPS)
- motors,
- Instruments (Turbidity, pH, Conductivity, Level, Oil, Algae, Flow, Pressure, Temperature…...)
- Valves (PMV, Auma, InterApp …).
- Doing the field modification requirements
*Barka II, a 678-MW electric power plant combined with a seawater desalination plant
with a capacity of 120, 000 m3/day, started operations in the Sultanate of Oman in
November 2009.The Barka Phase 2 plant has been designed and built by DEGREMONT
with Doosan Heavy Industries & Construction as our client, and operated by a
consortium comprising GDF SUEZ Energy International, Mubadala Development and
National Trading Company. With project value 800 MILLION US $.
*Key Responsibilities:
- Supervise all electrical and instruments equipment Energizing, starting-up, and testing during pre-commissioning and commissioning phases, and hand over to client.
-Parameterize all MV/LV protection relays (Micom, GE Multiline)and VSD(ABB, Vacon), and instruments (mostly E&H)
- Make pre-commissioning and commissioning procedures check list sheet and recordings reports of all electrical MV/LV panels, PLC, motors, VSD, UPS, and instruments
-Reporting the comments with solution to the client (technical support)
-Installation checking as per design, if not, issue non-conformance report(NCR) and site discrepancy report (SDR)
-Manage field electrical and instruments installations, quantity accounting, and material purchasing
-Take responsibility for all tests during pre-commissioning and commissioning phases with client.
-Loop checking, Commissioning, and troubleshoot for :
- electrical panels (MCC, MV, PLC, VFD, UPS)
- motors,
- Instruments (Turbidity, pH, Conductivity, Level, Oil, Algae, Flow, Pressure, Temperature…...)
- Valves (PMV, Auma, InterApp …).
-Doing the field modification requirements
*Wadi Ma’in, Zara and Mujib, Water Treatment and Conveyance Project, in the Dead
Sea Area up to Northern Amman, to provide the water to Amman with capacity of
47MCM/year, whereas the project value is 125Million US (USAID Financed), and the
Contractor joint venture of INFILCO DEGREMONTS Inc. and Morganti Group Inc.
*Key Responsibilities:
-Supervise all electrical and instruments equipment Energizing, starting-up, and testing during pre-commissioning and commissioning phases, and hand over to client.
- Parameterize all MV/LV protection relays (Micom, GE Multiline)and VSD(ABB, Vacon), and instruments
-Make pre-commissioning and commissioning procedures check list sheet and recordings reports of all electrical MV/LV panels, PLC, motors, VSD, UPS, and Instruments (mostly E&I)
Reporting the comments with solution to the client (technical support)
Installation checking as per design, if not, issue non-conformance report(NCR) and site discrepancy report (SDR)
- Manage field electrical and instruments installations, quantity accounting, and material purchasing
-Take responsibility for all tests during pre-commissioning and commissioning phases with client.
- Loop checking, Commissioning, and troubleshoot for :
- electrical panels (MCC, MV, PLC, VFD, UPS)
- motors,
- Instruments (Turbidity, pH, Conductivity, Level, Oil, Algae, Flow, Pressure, Temperature…...)
- Valves (PMV, Auma, InterApp …).
- Doing the field modification requirements
*Samra Wastewater Treatment Plant, Phase 1in al-zarqa. The wastewater management
System For the greater Amman area includes the collection, conveyance, and treatment
Of the Wastewater generated in the Amman Russeifa-zarqa basin. This project is the
First Build Operate Transfer (BOT) project in Jordan, and the first (BOT) project by
USAID.The project budget is $169 million
*Key Responsibilities:
- Design for all types of MCC, MDB, and LP panels
- Following the manufacturing of panels (product phase)
- Technical support for technicians
- Factory test for panels and issue FAT reports
- Make as built drawings (using EPLAN software)
- Supervise the installation on field
- Make maintenance, reparations, and troubleshooting for all types of panels
* Company profile:
This group specialized in Electrical equipment, electrical installations, medium and low
Voltage switchboards, motor control centers, control panels, industrial control systems,
Automation systems, SCADA, and high tech.systems.
These activities include the design and consultation, engineering, manufacturing supply,
Installation, testing, commissioning, training, and maintenance
Key Responsibilities:
-Following the product and the quality of carton and paper
- Make maintenance and troubleshooting for electrical and instruments equipment
- Company profile:
That time the company is the 3’rd biggest company for paper, carton, and packing manufacturing
in the Middle East, this factory are equipped with high technology techniques (CNC,
PLC, ROBOTICS...).