Majid Imran Mohammed

Lead the electrical engineering design review for stadium facilities including
bowl lighting, floodlighting, power distribution, ELV systems, and special event
systems.
Review and approve concept, schematic, detailed, and IFC electrical designs
in compliance with FIFA Stadium Technical Requirements, IEC / BS
standards, and local authority regulations.

Coordinate with architectural, structural, mechanical, ICT, AV, broadcast,
and security teams to ensure full multidisciplinary integration.
Ensure compliance with sustainability, energy efficiency, and carbon
reduction targets (LED floodlighting, smart controls, energy monitoring).
Review HV/LV power distribution schemes, substations, transformers,
generators, UPS, and ATS systems.
Ensure N+1 redundancy for all critical systems including match-day power,
broadcast, VAR, and safety systems.
Lead design review for stadium floodlighting systems (horizontal & vertical lux
levels, glare control, uniformity) to meet FIFA broadcast standards.
Review emergency lighting, escape lighting, and architectural façade lighting.
Provide engineering support during construction, addressing RFIs, technical
queries, and site issues.
Review and approve shop drawings, material submittals, method statements,
and mock-ups.
Carry out site inspections to verify installation compliance with approved
designs and specifications.
Coordinate with contractors to ensure works align with project milestones and
match-day readiness.
Guide and mentor junior electrical engineers and discipline engineers.
Contribute to engineering best practices, lessons learned, and continuous
improvement.
Support value engineering and constructability reviews without compromising
performance or compliance.

Supervised the installation and commissioning of medium and low voltage
power distribution systems, lighting control systems, and ELV systems.

Ensured compliance with SBC-401, IES RP-29, and relevant BS7671 wiring
regulations.

Managed site supervision for all electrical systems including lighting, small
power, HVAC controls, fire alarm, CCTV, access control, and earthing
systems.
Conducted regular inspections, FAT & SAT witnessing, and system handovers
ensuring compliance with BS EN 62305 for lightning protection and BS 5839 and
NFPA for fire alarms.
Provided value engineering recommendations, achieving cost savings while
maintaining design integrity.
Lead the supervision and technical review of electrical systems installation,
testing, and commissioning on-site to ensure full compliance with SBC, IES, and
BS standards.
Coordinate with project stakeholders, including sub-consultants, contractors,
and client representatives, to manage technical requirements and resolve site
issues.
Review, comment, and approve shop drawings, material submittals, method
statements, and as-built drawings against project specifications and applicable
codes.
Monitor and inspect site installations, ensuring strict adherence to design
documents, quality standards, and safety regulations.
Conduct technical audits and site inspections to verify compliance with electrical
engineering best practices and international standards.
Ensure proper implementation of lighting design calculations, load schedules,
cable sizing, earthing, and lightning protection systems as per IES and BS
standards.
Oversee the installation and commissioning of power distribution systems, ELV
systems (CCTV, Fire Alarm, BMS, Access Control), and ensure compliance with
SBC.
Review testing and commissioning reports, witness site acceptance tests (SAT),
and supervise system handovers.
Provide technical input for value engineering proposals, risk assessments, and
site condition changes, ensuring solutions meet regulatory and operational
requirements.
Ensure compliance with health, safety, and environmental (HSE) regulations
on-site in alignment with local authorities requirements and international
best practices.
Reviewed shop drawings, material approvals, and technical submittals,
coordinating with consultants and contractors for timely issue resolution.
Oversee and coordinate the integration of Electrical services with other
disciplines (civil, structures, architecture, utilities, public realm, and
transportation systems) to deliver cohesive and efficient infrastructure solutions.
Monitor the progress, quality, and compliance of Electrical works on site,
ensuring adherence to contract specifications, safety standards, and client
expectations.
Ensured all designs met project goals, safety regulations, sustainability
benchmarks, and enhanced customer experience.
Lead client-side design and construction coordination meetings for MEP
systems, ensuring effective communication and issue resolution.
Oversaw integration and coordination across multiple project areas, including
civil, MEP, depots, stations, and associated facilities.
Managed design schedules and budgets, guaranteeing timely delivery and
alignment with project scope.
Promoted collaboration between internal teams to uphold design quality,
consistency, and best practices.
Proactively identified design-related risks and developed effective mitigation
strategies to minimize project impacts.
Oversaw project development phases from concept to tender for MISK Boys,
Girls School, and Mobility hubs, emphasizing quality assurance and stakeholder
communication
Collaborated with design consultants, contractors, and line management to
identify and mitigate potential delays.
Actively participated in weekly technical and progress meetings with

stakeholders, including consultants, PMCs, and contractors.

Supervised and inspected electrical installations including MV/LV panels,
transformers, switchgear, lighting, fire alarm, and BMS systems.
Lead design, installation, testing, and commissioning of BMS, SCADA, DCS, PLC,
and other control systems.
Develop and review IO lists, wiring diagrams, control schematics, and system
documentation.
Perform FAT, SAT, and functional testing to ensure system performance and
safety.
Coordinate with MEP, electrical, mechanical, and civil teams for system
integration.
Ensure compliance with IEC, BS, and project standards.
Mentor junior engineers and provide technical support to clients and
contractors.
Prepare and maintain technical reports, handover, and commissioning
documentation.
Developed and implemented quality control plans (QCP) for electrical works in
large-scale construction projects.
Ensured compliance with project specifications, international standards (IEC,
NFPA, IEEE), and client requirements.
Conducted site inspections, audits, and technical reviews for electrical
installations and testing.
Reviewed and approved contractor submittals, shop drawings, and material
approvals for electrical works.
Coordinated with design, procurement, and commissioning teams to ensure
project quality deliverables.
Oversaw testing and commissioning activities, including load testing of
transformers, generators, and UPS systems.
Coordinate with project stakeholders, including sub-consultants, contractors,
and client representatives, to manage technical requirements and resolve site
issues.
Review, comment, and approve shop drawings, material submittals, method
statements, and as-built drawings against project specifications and applicable
codes.
Monitor and inspect site installations, ensuring strict adherence to design

documents, quality standards, and safety regulations.
Conduct technical audits and site inspections to verify compliance with electrical
engineering best practices and international standards.

Led the end-to-end management of MEP systems design, installation, and
commissioning for large-scale infrastructure works.
Coordinated interdisciplinary design reviews and technical workshops with
architects, civil, and structural teams to ensure seamless integration
conducted load analysis and system capacity planning in alignment with project
requirements and local authority regulations.
Managed MEP installation sequencing and site execution to meet critical project
milestones and minimize construction clashes.
Oversaw testing, commissioning, and handover processes ensuring full
compliance with quality, safety, and operational standards.
Liaised with clients, consultants, contractors, and suppliers for timely resolution
of technical issues and approval processes.
Monitored project budgets, material procurement, and resource allocations to
optimize cost efficiency and workflow.
Ensured MEP systems compliance with sustainability initiatives and applicable
Saudi Building Codes and international standards.

Coordinated with Qatar authorities including Ashghal, Kahramaa, Ooredoo,
QNBN, QAF, and O&M teams to secure necessary approvals and ensure smooth
project execution.
Led the planning, design, and execution of MEP systems (Mechanical, Electrical,
Plumbing, and ELV) for large-scale infrastructure and master development
projects.
Conducted regular design and site reviews to verify quality, compliance, and
progress against established project milestones.
Promoted innovation and the integration of smart technologies within
infrastructure services and master development projects.
Reported regularly to project leadership on MEP progress, risks, and key
technical matters to support informed decision-making.
Supervised the installation of MV, Pilot, LV, and Streetlight cables, ensuring
compliance with project specifications and authority requirements.
Coordinated with Kahramaa for MV and LV cable installations and resolved LV
related technical issues.
Raised RFIs (Requests for Information) to Kahramaa for approvals related to LV
and MV trenching and cable laying activities, ensuring timely clearances for site
works.

Inspected and monitored testing and commissioning of installed services
Issued NCRs (Non-Conformity Reports) for any discrepancies in the quality of
installations
Evaluated and approved monthly contractor billing requests according to the
monthly progress of installations and inspections
Arranged and attended internal project meetings with the client, contractor, and
subcontractors to review the progress of the project and quality checks, and
prepared Variation Orders
Supervised the projects planning, designing, construction, and close-out phases
Monitored progress against set targets at various stages of the project and

resolved issues
Customized project briefs, technical scope of work, and preliminary Concept
plan
Attended weekly progress, technical, and safety meetings related to projects
Promoted innovative ways to add value and reduce project costs
Provided Weekly/Monthly reports to higher management through formal and
informal reviews
Controlled procurement of materials and logistics related to various projects
Ensured effective and efficient quality/HSE management system was established,
implemented, and maintained
Ensured proper conduct of all administrative and man-management roles
required by Group policy and local labor laws
Reviewed shop drawings, material submittals, and transmittals of complete
Mechanical works
Monitored and managed site inspectors
Corresponded between client, project management, and contractor
Inspected and ensured all materials and equipment incorporated into permanent
construction were in compliance with project contract requirements and
specifications.

Inspected and monitored testing and commissioning of installed services
Issued NCRs (Non-Conformity Reports) for any discrepancies in the quality of
installations
Evaluated and approved monthly contractor billing requests according to the
monthly progress of installations and inspections
Arranged and attended internal project meetings with the client, contractor, and
subcontractors to review the progress of the project and quality checks, and
prepared Variation Orders
Supervised the projects planning, designing, construction, and close-out phases
Monitored progress against set targets at various stages of the project and
resolved issues
Customized project briefs, technical scope of work, and preliminary Concept
plan

Attended weekly progress, technical, and safety meetings related to projects
Promoted innovative ways to add value and reduce project costs
Provided Weekly/Monthly reports to higher management through formal and
informal reviews
Controlled procurement of materials and logistics related to various projects
Ensured effective and efficient quality/HSE management system was established,
implemented, and maintained
Ensured proper conduct of all administrative and man-management roles
required by Group policy and local labor laws
Reviewed shop drawings, material submittals, and transmittals of complete
Mechanical works
Monitored and managed site inspectors
Corresponded between client, project management, and contractor
Inspected and ensured all materials and equipment incorporated into permanent
construction were in compliance with project contract requirements and
specifications.

Designed and developed detailed electrical system designs and components
tailored to project-specific needs
Managed project timelines, budgets, and resource allocation to ensure on-time
and within-budget project completion
Collaborated with architects, contractors, and engineers to seamlessly integrate
electrical systems into overall projects
Ensured compliance with local, national, and international electrical codes and
standards in all designs and installations
Conducted quality checks on electrical components and systems to maintain
high-quality standards
Prepared comprehensive technical drawings, specifications, and reports to
support project development and future maintenance
Conducted feasibility studies and risk assessments to identify and mitigate
potential challenges
Provided technical support during construction phase, including site inspections
and addressing electrical issues as they arose.

Successfully executed the North East Underground Car Park project for
Education City in Qatar
Collaborated with foundation consultant Parsons International and project
management team ASTADS
Managed project for client Qatar Foundation with a value of 600 million QAR
Oversaw scope of project including building features such as parking capacity of
1, 640 spaces, 2 levels of basement parking, and an above grade people mover
station above the car park
Implemented fire alarm, access control, parking guidance, CO sensor, and
structured cabling systems for the project

Led the third expansion of the Holy Haram project as a consultant for Dar Al
Handasa, serving the Kingdom of Saudi Arabia
Successfully executed a project valued at 800 million, including the installation of
14 generators (3.5 MW) inside Generator Plants
Implemented a comprehensive supply and cable management system for the
Chiller Plant and Fire Fighting Pump Station
Oversaw the installation of electrical services in the Waist Handling Plant, as well
as Transformer and LV, MV & HV Switchgear.

Successfully executed the Al Rayyan Tower project in Al Nahda, Sharjah, UAE
with a total value of 700 million
Collaborated with B&H (Bregman and Hamann) as the consultant and Beeah
(Sharjah Municipality) as the client
Oversaw the construction of a Mixed-Use Development including eight level
commercial podiums, two basements, two 35-story residential towers, and one
35-story office tower
Managed the installation of 22 transformers (1600 KVA each), generators, DB,
MDB, SMDBs, LV & MV switchgear, power and lighting systems, fire alarm
systems, ELV systems, cable management systems, bus bar (light & power), and
other electrical services.