Total Years of Experience: 14 Years, 0 Months
April 2020
To Present
Field Mechanical Engineer
at BL Harbert International
Location :
Lebanon - Beirut
1- follow up the site installation schedule
2- follow up Concrete pouring schedule and make sure all mechanical is roughed in
3- Coordinate mechanical and electrical on-site installation
4- Make sure to issue the right and latest drawing to site for construction
5- Follow-up with Revit/BIM team to issue as-built drawing
6- follow up with Revit/BIM team to issue ITF(issue to Field)
7- Attend site meetings and report to the mechanical manager
8- attend engineering coordination meetings
9- attend progress meetings
10 - perform a last check to make sure all sleeves are installed prior to wall or slab concrete pouring
11-coordinate with QC and make sure all the necessary risk mitigation and opportunity realization actions are identified and implemented.
2- follow up Concrete pouring schedule and make sure all mechanical is roughed in
3- Coordinate mechanical and electrical on-site installation
4- Make sure to issue the right and latest drawing to site for construction
5- Follow-up with Revit/BIM team to issue as-built drawing
6- follow up with Revit/BIM team to issue ITF(issue to Field)
7- Attend site meetings and report to the mechanical manager
8- attend engineering coordination meetings
9- attend progress meetings
10 - perform a last check to make sure all sleeves are installed prior to wall or slab concrete pouring
11-coordinate with QC and make sure all the necessary risk mitigation and opportunity realization actions are identified and implemented.
May 2015
To February 2020
Site mechanical engineer
at Erga group
Location :
Lebanon - Beirut
Project Engineer \[site\]
Responsibilities:
Act as the main technical adviser on site;
Check plans, drawings and quantities (Air conditioning, heating, ventilation, drainage, water supply, firefighting, gas...)
Continually review the contractor’s construction schedule during the progress of site works with regards to MEP services and report to the project Director on the same.
Manage the day to day work of the MEP team.
In conjunction with the document controller, ensure that the filing/logging of the MEP documentation is undertaken in line with the project handbook and continually monitor the same.
Take part in risk workshops and report any risks associated with MEP installations; Review Contractor’s installation method statements.
Review Contractor’s shop drawings against the design \[tender\] drawings for compliance with the design intent and return to Project Director with appropriate comments / approval within the specified contractual period.
Review contractor’s mechanical shop drawing in conjunction with the structural and electrical engineers to ensure engineering co‐ordination and advise the Project Director accordingly.
Review Contractor’s mechanical services material proposals against specified technical performance requirements and the appropriateness of the proposals.
Review Contractor’s proposed sub‐contractor(s) associated with the engineering works from a technical standpoint.
Undertake general project site observation / inspection of the mechanical services works for Contractor’s adherence to the approved shop drawings and Consultant’s specification, good working practices and construction schedule.
Undertake off‐site inspections of proposed equipment and materials.
Undertake prior review of Contractor’s proposed mechanical system testing & commissioning methods and schedule.
Witness on‐site piped system pressure test, air conditioning duct leakage testing and other testing that may be required during the first fix works ;
Review and comment on Contractor’s testing and commissioning results Maintain on‐going list of mechanical services defects for contractor’s remedial action.
Undertake final project snagging and prepare list of defects for Contractor’s action.
Review and comment upon the Contractor’s Operation and Maintenance manuals.
Review and approve Contractor’s ‘as built’ drawings.
Oversee selections and requisition of materials and plant;
Plan the work and efficiently organizing the plant and site facilities(attendant PMP courses) Oversee quality control and health and safety matters on site;
Prepare reports as required; Resolve any unexpected technical difficulties and other problems that may arise.
Coordinating testing and commissioning activities and providing advice on testing and commissioning procedures and documentation (air balancing, chiller, VRV , fire system, BMS, EIB..)
Responsibilities:
Act as the main technical adviser on site;
Check plans, drawings and quantities (Air conditioning, heating, ventilation, drainage, water supply, firefighting, gas...)
Continually review the contractor’s construction schedule during the progress of site works with regards to MEP services and report to the project Director on the same.
Manage the day to day work of the MEP team.
In conjunction with the document controller, ensure that the filing/logging of the MEP documentation is undertaken in line with the project handbook and continually monitor the same.
Take part in risk workshops and report any risks associated with MEP installations; Review Contractor’s installation method statements.
Review Contractor’s shop drawings against the design \[tender\] drawings for compliance with the design intent and return to Project Director with appropriate comments / approval within the specified contractual period.
Review contractor’s mechanical shop drawing in conjunction with the structural and electrical engineers to ensure engineering co‐ordination and advise the Project Director accordingly.
Review Contractor’s mechanical services material proposals against specified technical performance requirements and the appropriateness of the proposals.
Review Contractor’s proposed sub‐contractor(s) associated with the engineering works from a technical standpoint.
Undertake general project site observation / inspection of the mechanical services works for Contractor’s adherence to the approved shop drawings and Consultant’s specification, good working practices and construction schedule.
Undertake off‐site inspections of proposed equipment and materials.
Undertake prior review of Contractor’s proposed mechanical system testing & commissioning methods and schedule.
Witness on‐site piped system pressure test, air conditioning duct leakage testing and other testing that may be required during the first fix works ;
Review and comment on Contractor’s testing and commissioning results Maintain on‐going list of mechanical services defects for contractor’s remedial action.
Undertake final project snagging and prepare list of defects for Contractor’s action.
Review and comment upon the Contractor’s Operation and Maintenance manuals.
Review and approve Contractor’s ‘as built’ drawings.
Oversee selections and requisition of materials and plant;
Plan the work and efficiently organizing the plant and site facilities(attendant PMP courses) Oversee quality control and health and safety matters on site;
Prepare reports as required; Resolve any unexpected technical difficulties and other problems that may arise.
Coordinating testing and commissioning activities and providing advice on testing and commissioning procedures and documentation (air balancing, chiller, VRV , fire system, BMS, EIB..)
November 2012
To May 2015
Mechanical engineer
at Erga group
Location :
Lebanon - Beirut
Mechanical Engineer \[Design\]
Responsibilities: Design of Residential and Commercial Mechanical Systems (Air
conditioning, heating, ventilation, drainage, water supply, firefighting, gas...) based on
international standards and codes. Position also includes coordination with the
supervision department as well some site visits and supervision tasks.
Project sundertaken are within the MENA area.
Sama Beirut tower
Beit Misk
WaterFront City Dbayeh
Kintele Brazzaville Villa
Al Gharafa Private Villas
Presidential Palace in Equatorial Guinea
4748 towers Achrafieh
Bank of Beirut
Warehousing and Logistic Park at Abou Fsila
Responsibilities: Design of Residential and Commercial Mechanical Systems (Air
conditioning, heating, ventilation, drainage, water supply, firefighting, gas...) based on
international standards and codes. Position also includes coordination with the
supervision department as well some site visits and supervision tasks.
Project sundertaken are within the MENA area.
Sama Beirut tower
Beit Misk
WaterFront City Dbayeh
Kintele Brazzaville Villa
Al Gharafa Private Villas
Presidential Palace in Equatorial Guinea
4748 towers Achrafieh
Bank of Beirut
Warehousing and Logistic Park at Abou Fsila
April 2012
To June 2012
Maintenance Engineer
at SONACO
Location :
Lebanon - Beirut
Maintenance and preventive maintenance for food manufacturing lines, conveyors and steam boilers.
Carrying out routine scheduled maintenance work and responding to equipment faults.
Diagnosing breakdown problems.
Fitting new parts and making sure equipment is working correctly.
Carrying out quality inspections on jobs.
Arranging specialist procurement of fixtures, fittings or components.
Controlling maintenance tools, stores and equipment.
Monitoring and controlling maintenance costs Dealing with emergencies, unplanned problems and repairs.
Improving health and safety policies and procedures.
Working with specialist equipment, such as programmable logic controllers (PLC), which control machinery on factory assembly lines.
Writing maintenance strategies to help with installation and commissioning guidelines.
Ensuring there is continuous cover of the machinery and equipment in case of breakdowns.
Carrying out routine scheduled maintenance work and responding to equipment faults.
Diagnosing breakdown problems.
Fitting new parts and making sure equipment is working correctly.
Carrying out quality inspections on jobs.
Arranging specialist procurement of fixtures, fittings or components.
Controlling maintenance tools, stores and equipment.
Monitoring and controlling maintenance costs Dealing with emergencies, unplanned problems and repairs.
Improving health and safety policies and procedures.
Working with specialist equipment, such as programmable logic controllers (PLC), which control machinery on factory assembly lines.
Writing maintenance strategies to help with installation and commissioning guidelines.
Ensuring there is continuous cover of the machinery and equipment in case of breakdowns.
May 2009
To October 2011
bartender
at edde sands
Location :
Lebanon
barman in the resort and wedding bar manager
Share on Facebook
Share on Twitter
Share Via Email