Lead Structural Engineer
CivilTech Consultancy
Total years of experience :19 years, 10 Months
I am practising structural engineer, with 11 years experience in the following:
• Design of steel and concrete low and high rise buildings.
• Design of bridges.
• Design of foundation.
July 2013 - December 2013: Director
CivilTech Consultancy
Al-Elifoon Road Widening Project:
• Design of two typical concrete bridges on each side of existing concrete
bridges.
March 2012 - November 2013: Bridge Engineer on behalf of Bannaga Consult.
Karakon Hamashkriab road project:
• Design review for five integral concrete bridges, and perform seismic check in accordance with Eurocode.
June 2013 - August 2013: Director
CivilTech Consultancy
El-Fashir Kutum Road project:
• Design of concrete substructure for three typical steel - truss bridges of 300
meter length.
April 2013: Director
CivilTech Consultancy
Khor Abu-Anga Bridge project:
• Design of reinforced concrete, integral bridge of 45.0 meter length.
February 2013: Director
CivilTech Consultancy
Port Sudan New Strategic Depot project:
• Check for LPG tank's foundation for shifted pile.
• Design of a replacement piles and pile caps.
Mohamed Omer Hassan
Mohamed Omer Hassan C.V
October 2012: Director
CivilTech Consultancy on behalf of Schindler
Police Clinic project:
• Design of the elevator's supporting steel frame structure.
February 2012 - March 2012: Director
CECi+ Engineers International
Commercial Bank of Ethiopia project:
• Schematic design of 90• twisted, 45 storey - concrete tower in Addis Ababa
- Ethiopia.
May 2010 - February 2012: Technical Director
A&A Engineers and Constructors
Nile Avenue widening project:
• Design management of road-way alignment, concrete bridge design and earth embankment design.
• Schematic design for the concrete bridge.
• Sheet pile wall design.
• Technical support for construction works.
February 2011 - February 2012: Technical Director
A&A Engineers and Constructors
Alsoug Almarkazi interchange project:
• Design and prepare project documents for four spans overpass, concrete
bridge at Alsoug Almarkazi intersection.
January 2010 - March 2010: Kuajock Bridge Project - Sudan:
• Design and prepare structural details for 210m composite steel bridge over
Jur River.
December 2009 - February 2010: Technical Director
A&A Engineers and Constructors: Samaha
Bridge Project - Sudan:
• Design and prepare structural details for 100m concrete bridge over Khor
Samaha.
Mohamed Omer Hassan
Mohamed Omer Hassan C.V
November 2008 - October 2009: Senior structural engineer
CDCi+ Doha: CENTURY CITY DEVELOPMENT - DOHA:
• Design and prepare structural details for 40 stories steel structure, office and
Hotel towers.
• Design and prepare structural details six stories steel structure, convention
Centre 180m x 63m width.
• Design and prepare structural details of four stories steel structure, Mosque.
• Century City Development
Doha, Qatar 2008
Architects: Atkins
Century City project is a major development in Doha. The total built area exceeds 400, 000 square
meters. It's a multi-use development featuring:
• Twin Towers each of 40 stores. One tower will be a five star hotel and the other will be state of the art office space. The towers are connected at the roof where a sky restaurant will be
located.
• A convention Centre.
• A large housing complex.
• Commercial and retail space.
• Underground parking structure, which can house over 7, 000 cars.
Mohamed Omer Hassan
August 2007 - August 2007: TEKNO Consultancy, Sudan: Diagnosis and Agricultural Analysis LAB:
• Design and prepare structural details of 12-6.0m span x 3-5.0m span flat slab
floor, 8 storey concrete building.
July 2007 - July 2007: TEKNO Consultancy, Sudan: Ministry of physical planning warehouse:
• Design and prepare structural details of 4 x30m spans steel frame warehouse
- Khartoum - Bahri.
July 2007 - July 2007: TEKNO Consultancy, Sudan: SADIG INT. Co. H.Q. Building:
• Design and prepare structural details of 8 storey steel structure, office based
building in Khartoum.
April 2007 - July 2007: TEKNO Consultancy, Sudan: KENANA Sugar Co. H.Q. Building:
• Design and prepare structural details of 21 storey steel structure, office based
building in Khartoum.
January 2007 - April 2007: TEKNO Consultancy, Sudan: Wad-Medani Air port Project:
• Design of proposed 50.0m single-span steel box-girder bridge over El-
Rahad River.
Mohamed Omer Hassan C.V
October 2006 - November 2006: Structural engineer,
A & A Engineers and Constructors
Dongola Bridge project:
• Bridge superstructure analysis by using influence surface method to calculate the maximum live load effects.
November 2005: GNPOC NEW WAREHOUSE - GABRA AREA- Project:
• Design of pile foundation system for steel frame warehouse.
• Design of rigid pavement slab.
January 2004 - November 2006: Structural engineer
A&A Engineers and Constructors
Nile Street, Sudan, TUTI suspension bridge project:
• Structural, bridge engineer.
• Design supporting truss system for tower's beams concreting platform and
Bracing system to eliminate deflection of tower legs under construction Loads
- Full 3D FE for the concrete tower.
• Design of approach span's piers and Bridge deck slab.
• Structural 3D and 2D analysis for main bridge using FE software.
• Horizontal and vertical alignment detailing and Setting out plans.
• Shop and as built drawings.
• Re-Design of Shear Pin Piles in Tuti side.
Papers and publication:
• "Design of integral concrete bridges". Sudanese Engineering Society,
September 2012.
Mohamed Omer Hassan
Mohamed Omer Hassan C.V
Sample Bridge-Structure Projects:
1- Khor Samaha Bridge
The bridge comprises 5 spans of precast concrete beams, supported by concrete piers and end
abutments. The foundation is bored-cast insitu piles.
During flood season End of construction
Precast beams erection Substructure construction
Mohamed Omer Hassan
Mohamed Omer Hassan C.V
2- Alsoug Al-Markazi Overpass:
The structure provides grade separation at Alsoug Al-Markazi intersection - Africa Street. The bridge
comprises four spans of precast concrete beams, supported by concrete piers and end abutments.
The foundation is bored-cast insitu piles.
Finished structure
Bridge erection
Precast beam
Bridge foundation
Mohamed Omer Hassan
Mohamed Omer Hassan C.V
3- Karakon-Hamashkriab Road:
Karakon-Hamashkriab project consists of five concrete bridges ranging from 32m to 150m in length; the structural form is an integral abutment and wall piers with a voided slab superstructure. My
contribution was providing the client with the schematic design, peer review and seismic design. The
bridges reviewed in accordance with structural Eurocode, and designed for seismic action as the site
located in active zone.
Bridge elevation
SAP2000 - 3D Model Abutment-soil interaction
Mohamed Omer Hassan
Mohamed Omer Hassan C.V
4- Tuti Suspension Bridge:
Tuti Bridge was constructed as part of the ministry of infrastructures plans to modernize the road
network through a system of new bridges passing via Tuti Island to take traffic from Khartoum to
Omdurman and Khartoum North. The aim is to relieve traffic congestion in the capital as well as aid the residents of Tuti Island with their daily commuting as their only way of transportation was via barge and
ferry. The bridge is a 210m suspension spanning the Blue Nile with two 50m steel bridges on each
approach, and utilizing innovative shear pin concept for the anchorage system.
Approach span's pier Main span erection
Tuti suspension bridge
Mohamed Omer Hassan
Mohamed Omer Hassan C.V
• Sample Building-structure Project:
July 2005 - November 2005: TEKNO Consultancy, Sudan: Mogran Business District Development Project, Khartoum:
• Design of 6.0m height, 1.4Km length RC retaining wall.
• Design of two 28.0m single span prestressed concrete bridges.
Mohamed Omer Hassan