MOHAMED FATHY, Project Engineer Structural Engineer

MOHAMED FATHY

Project Engineer Structural Engineer

Al Jazirah engineering consultant

Location
Saudi Arabia - Riyadh - Al Malik Abd Allah
Education
Bachelor's degree, civil engineer
Experience
18 years, 4 Months

Share My Profile

Block User


Work Experience

Total years of experience :18 years, 4 Months

Project Engineer Structural Engineer at Al Jazirah engineering consultant
  • Saudi Arabia - Riyadh
  • My current job since May 2023

OWNER: Saudi Arabia Railways (SAR )
 The purpose of this project is to upgrade the Fire Protection Systems
 The scope includes but is not limited to developing the feed package and converting it into an
installation package, performing the hydraulic calculations according to the final installation
package, procurement of all required materials, supply, installing, testing, and commissioning of
the fire protection system the general site and buildings at Riyadh Dry Port,
Responsibility
Manage the workgroup on the site. (inspection works, and manage quality control of deliverables)
Follow-up on all stages of the project, to conduct a daily check of requests for receipt
Review summaries submitted by contractors
Study the quality of work and prepare daily and monthly reports Approval of samples submitted by the
contractor
Hold periodic meetings with contractors to solve problems Coordinate activities, equipment, and
information
Liaise with clients to identify and define project requirements, scope, and objectives, and make certain
that clients' needs are met as the project evolves
Monitor and track the project's progress and handle any issues that arise
Act as the point of contact and communicate project status adequately to all participants.
Use project management tools to monitor working hours, budget plans
Meeting with engineers, architects, and contractors on an ongoing basis regarding project objectives
and progress.
Ensuring budget costs for wages, contractors, materials, and equipment are not exceeded.
Ensuring the construction process starts and ends on time, and ensuring daily and weekly deadlines
are met. Ensuring compliance with health, safety, and all other regulations.
I am issuing SIs and VOs to project management.

Construction Manager at TATWEER MISR
  • Egypt - Cairo
  • My current job since February 2017

Manage the workgroup on the site
Follow-up of all stages of the project, to conduct a daily check of requests for receipt Review summaries submitted by contractors
Study the quality of work and prepare daily and monthly reports Approval of samples submitted by the Contractor
Hold periodic meetings with contractors to solve problems Coordinate activities, equipment and information
Liaise with clients to identify and define project requirements, scope and objectives Make certain that clients' needs are met as the project evolves
Monitor and track project's progress and handle any issues that arise
Act as the point of contact and communicate project status adequately to all participants Use project management tools to monitor working hours, budget, plans
Meeting with engineers, architects and contractors on an ongoing basis regarding project objectives and progress.
Ensuring budget costs relating to wages, contractors, materials and equipment are not exceeded.
Ensuring the construction process starts and ends on time, and ensuring daily and weekly deadlines are met. Ensuring compliance with health, safety and all other regulations.
Issuing SI's and VOs to project management.

projec engineer at Saudi Engineeering Group International (SEGI)
  • Saudi Arabia - Riyadh
  • December 2015 to January 2017

Quality control inspections of works carried out on site by the contractor.
Keep records of work carried out in the field. Reporting non-compliance to the Site Engineer. Keeping field records of site resources.
Advise Site Engineer of any site events that are likely to impede progress or cause non-compliance. Keep Safety Engineer informed of risky activities and non-compliance in the field.
Accept approved requests for inspection from the Site Engineer and attend the site to witness tests to ensure compliance with the specification.
Check contractor's materials on site and proper storage and handling on site.
Provide general inspection on all construction labor and subcontracted tasks to ensure professional workmanship.
Participate in the development of quality control reports and procedures.
Participate in the development of job safety practices and in the preparation of safety reports. Maintain office files related to the project, quantity calculations and writes daily diaries.
Prepare daily reports and other documentation, as required by the contract. Verify that only approved materials are incorporated in the work.
Perform labor compliance interviews and maintains as-built plans.
Recognize potential conflicts, issues and problems, and reports to supervisor with proposed solution.
Collect, review and files Certificate of Compliance, MSDS, inspection tags and other information relevant to the materials used.
provide technical guidance to lower-level inspectors.
Coordinate work of subconsultants for surveying and material testing.
Participate in the development of job safety practices and in the preparation of safety reports. Report on installed quantities to verify applications for payment and change order work.

Project engineer at almuhaid Consulting Engineers
  • Saudi Arabia - Riyadh
  • December 2012 to September 2015

Work as site civil engineer for EXECUTIVE PROJECTS LIKE
( building units , roads, water structure, landscape )

Quality control inspections of works carried out on site by the contractor.
Review invoices for contractors, prepare (B.O.Q) for new projects and study designs for submitted Review summaries submitted by contractors
Study the quality of work and prepare daily and monthly reports Approval of samples submitted by the Contractor
Hold periodic meetings with contractors to solve problems
Maintain daily diaries of events associated with work on site. Logging and monitoring all contractors submit. Prepare necessary draft correspondence for final approval by the construction manager

Resident Engineer at Center of design and engineering consulting
  • Egypt - Cairo
  • August 2009 to November 2012

-Inspecting requests of ( civil, architect .
-Maintaining daily diaries of events associated with work on site .
-Logging and monitoring all contractors submittals .
-Preparing necessary draft correspondence for final approval by the construction manager .
-Study and giving comments on the contractors claims
-Review and approving as built drawings for final approval .
-Assisting the manager in his duties .

civil inspector at CEL(consultant engineering labrotarios)
  • Egypt - Cairo
  • November 2007 to August 2009

-Inspecting requests of ( civil, architect, infrastructure, ) .
-Maintaining daily diaries of events associated with work on site .
-Logging and monitoring all contractors submittals .
-Preparing necessary draft correspondence for final approval by the construction manager .
-Study and giving comments on the contractors claims
-Review and approving as built drawings for final approval .
-Assisting the manager in his duties .

Civil site engineer at oriental company for contracting
  • Egypt - Cairo
  • January 2006 to November 2007

Engineer implementation of the company
- Work project set up camp security central project is built Break security forces, a central component of the three floors + Ground and another building a store of weapons consisting of one role Ground and supplement the camp set up a mosque and an external wall height of four meters and pillars watchtowers.

Education

Bachelor's degree, civil engineer
  • at cairo university
  • September 2005

61%

Specialties & Skills

Construction Design
Consultancy
Microsoft Excel
AutoCAD
Civil Works
computer and internet skills
sap,cad,word excel
Primavera P6
sap,auto cad,exel,word,power point

Languages

English
Expert

Memberships

Saudi Council of Engineers
  • Member
  • September 2013
PMI-PROJECT MANAGEMENT INSTITUTE
  • MEMBER
  • November 2020

Training and Certifications

PMP (Certificate)
Date Attended:
November 2020
AUTO CAD (Training)
Training Institute:
FUCULTY OF ENGINEERING
Date Attended:
January 2006
Duration:
24 hours

Hobbies

  • writing stories and reading