محمد سمير

• Meeting regularly with clients to discuss project progress and issues that may arise during the course of the project
• Managing and overseeing the entire project lifecycle, including planning, scheduling, budgeting, risk management, procurement management, etc.
• Overseeing the project team’s work to ensure that they meet deadlines and milestones
• Reviewing project deliverables to ensure that they meet requirements and specifications
• Monitoring changes in legislation and industry trends to ensure that projects are up to date with best practices
• Providing technical expertise and experience where needed to solve complex problems
• Managing subcontractors or vendors to ensure that they meet deadlines and deliver high-quality products or services according to specifications
• Communicating with stakeholders about project status, risks, and challenges
• Managing conflict among team members to ensure that all parties are on the same page

 Project: JEBEL ALI VILLAGE (254 VILLA'S) - VILLA DEVELOPMENT ON PLOT NO 5910297 AT JABAL ALI FIRST Client: NAKHEEL CONSULTANT: ARCH GROUP MAIN CONTRACTOR: UNEC

Responsibilities:

• Attending regular meetings (WORK progress, coordination, design, etc.) with Main
Contractor and Consultant to DISCUSS key issues related to the project and take
effective corrective actions.

• Monitoring project budgets and schedule and oversee performance to ensure on time,
quality and on budget project execution

• Coordinate with the design team on all aspects of the design.

• Prepare periodic reports for management including status of budgets,
variance/change claims, schedules, disputes, up-coming activities & safety records.

• Ensure all technical aspects of the projects are strictly complied with and in conformity
with Conditions of Contract, Particular Specifications, General Specifications, Contract drawings & BOQ.

• Ensure that the health and safety requirements are provided and that they comply with authorities’ regulations.

• Provides guidance, managerial, technical support to complete project team.

• Analyze drawings, specifications, and statements of work in the preparation of activity networks for project resource planning and scheduling.

• Prepare program master schedule and performs critical path analysis.

• Prepare plans and schedules, status reports and performance evaluation.

• Provide program planning capabilities including interfaces and risks analysis.

• ESTABLISH and monitor program and project controls KPI's.

• Ensure program policies and procedures are implemented accordingly.

• Develop Action and Recovery plans to support program delivery on time.

PROJECT :

 Project: HOLIDAY INN HOTEL & SUITES @ DUBAI SCIENCE HOTEL: 2B+G+2P+15F+R+UR Consultant: Consultant: KHATIB & ALAMI Consolidated Engineering Company Budget: 120, 000, 000.AED

 Project: NEST STUDENT ACCOMMODATION BUILDING ON PLOT NO 3288/9, SHARJAH. Consultant: MIMAR EMARITS ENGINEERING CONSULTANT Budget: 367, 000, 000.AED

Projects Names:

1. Project: Commercial Tower (2B+G+23) -Still under construction.
Plot No: DM 674-195 - @ Motor city -Dubai
Consultant: Al MAJAL Engineering Consultant.
Budget: 120, 000, 000.AED

2. Project: proposed 21 Villas (B +G+1st +2nd +Roof) - Handing over
Plot No: 251-1266 / Mirdif - Dubai.
Consultant: GULF PIONEER
Budget: 30, 000, 000.AED

3. Project: Masjed (Ground Floor Only) - Handing over
Plot No: 1C1-MSJ-10 /International City - Dubai.
Consultant: CIRCLE
Budget: 5, 000, 000.AED

4. Project: Labor Camp (G + 4Typ Floor) - Under construction.
Plot No: 599-2281 Jebel Ali - Dubai
Consultant: GULF PIONEER



Responsibilities:
• Monitoring the work progress at all running projects, and make sure that our staff instructed by project work program.
• Supervise and follow up the order and delivery of long lead item in all running projects.
• Make sure that our staff using the company’s assets and resources to the fullest.
• Supervise the estimation department and review all prices before submitting our quotations to client/main contractor.
• Ensure that the total delivery of the mechanical deliverables meets quality expectations, schedules, and are within performance budgets.
• Evaluate employee performance and make recommendations for salary and grade adjustments. Take corrective action when performance falls below expectations.
• Assist in project proposals by ascertaining scope, determining the required engineering/design budgets and when necessary, serve as mechanical subject matter expert during proposal presentations.
• Maintain effective communications with department members, project teams, higher management, other offices, and clients.
• Drive continuous improvement of the department’s specifications, design procedures, standards, guidelines and details. Ensure consistent design product with templates and standards so the preferred starting point of any system is understood by everyone.
• Finalize the quotations with suppliers and subcontractor.

Projects Names:

1-Project: Al Rahmania Shopping Mall.
Budget: 250, 000, 000 AED
Project description: Shopping mall of built up area 60, 000 Mtr2, B +G + Mezz. +R+UR including various areas of experience such as:
• HVAC System (8 Nos. of air cold chiller, FAHU, AHU FCUs).
• Drainage and water supply system.
• FF system (2set of firefighting pumps and 1 fire hydrant pump).
• BMS System.
• Gas System (3 Water Meter rooms)
• Low current system such as (ACS, PMS, CCTV, PA).
• Conveying system (33 units).
• LV System.
• 33 KV substation.

2- Project: Hotel Apartment (2B+G+4P+20 TYPICAL+ROOF+UP-1 & 2)
PLOT NO: (4) - ALND-AL QASIMIYA (U.A.E)
Consultant: KHATIB & ALAMI Consolidated Engineering Company
Budget: 115, 000, 000 AED

3-Project: (B+G+Mez+6P+26 TYP. + Ser. Floor +H.C +Helipad)
PLOT NO: (578) - ALMAJAZ (U.A.E)
Consultant: KHATIB & ALAMI Consolidated Engineering Company
Budget: 120, 000, 000 AED

4-Project: PROPOSED HOTEL FOR AL SOOR INVESTMENTS ON
PLOT: 671 AL GHUWAIR (U.A.E)
Consultant: Al Emaar Engineering Consultant
Budget: 41, 000, 000 AED


Responsibilities:

 Initiating Stage

• Assisting PM and planning engineer during preparation of baseline work program.
• liaising with authorities to get the required NOCs such as water, drainage, etisalat, electrical, ……etc., in order to get work permit
• Review MEP B.O.Q and make sure that it is matching with MEP tender drawings.
• Review the contract of MEP subcontractor and make sure that the MEP scope is identified and covered as per BOQ and tender drawings.
• Review tender documents /drawings of MEP system and compare it with the IFC drawings.

 Execution Stage

• Review MEP material/equipment technical submittals, shop drawing and builders work prior to submitting to consultant in order to avoid resubmission.
• Follow up the log sheet of long lead item, authorities’ log, material submittal and shop drawings submittal.
• Studying any impact on MEP services caused by Architectural/structure changes or additional scope and raise variation order accordingly to consultant.
• Coordinating all MEP services with structure, architectural and ID elements.
• Monitoring of work progress and ensure that all works are done as per plan.
• Ensure that Company/ Authorities HSE policies are implemented at site in coordination with HSE department.
• Assist in the recovery/revised plan in case of any delay occurred to keep the project on track.
• Review and release the MEP subcontractor’s payments.
• Ensuring that all fixations of MEP services as per authorities’ requirements and project specifications.
• Review the method statements of MEP works respecting the installation works and logistics for equipment positioning.
• Ensuring that services provisions inspection and clearance are provided in time for structure.
• Provide technical advice to construction team

 Closing stage

• Ensure that MEP site instruction/NCR is closed out.
• Follow up and review the As Built Drawings.
• Clearing all snag list as per consultant instructions.
• Follow up with authorities for project’s handing over and get final NOC.
• Ensure that all warranty, guaranty and operation manual are submitted prior to closing the project.

o Island Eagle, UAE \[February 2011 to till 2015\]
Job Title: Mechanical Project Engineer

Projects Names:
• Proposed 3 Nos. Of ADNOC Petrol Station@ Sharjah & Ajman
Main Consultant: QHS Engineering Consulting
Sub Consultant: Altorath Engineering Consulting

• Proposed (G+M) Build. Sharjah cultural &ChessClub @ Jarina - sharjah
Client: Government of Sharjah Directorate of Public Work
Consultant: Rashed El Owais Engineering Consulting.

• Proposed 14 Nos Of (G+1) Villa @ Al Gezzat - Sharjah
Client: Command of Military Works
Consultant: Gulf Engineering Consulting.

• Proposed Hanger and Offices Building at Sharjah Air Port
Consultant: Aircraft support Industries& International Engineering Consultant.

• Proposed Res. & Comm. Building (Gr.+3P+9Typ.) At Sharjah
Consultant: Gulf Sky Engineering Consultant.

o ATS (Aman Technical Systems) ---- Dubai, UAE \[December 2008 to February 2011\]
Job Title: Mechanical Site Engineer

Projects Names:
• Proposed (B+G+9+GYM) Residential Buildings @ Dubai Sport City (Gulf Investment Group Ltd.)
Consultant: Image Engineering Consulting.
• Proposed (B+G+11+GYM) Residential Buildings @ Dubai Sport City (Gulf Investment Group Ltd.)
Consultant: Image Engineering Consulting.
• B+G+12+GYM Building @ Al Nahda Second - Dubai.
Main Contractor: Bin Shaffar Contracting.
Consultant: Al Asri Engineering Consulting.


Responsibilities:

- MEP quantity analysis and project's coast estimate.
- Generates enquiry to suppliers on all subject material, receives orders, prepares price comparisons and provides technical recommendations to management
- Revising Tender Drawings and Preparing Suitable Design in accordance with Local and International Standards and Regulations.
- Preparation of Material Submittal for Consultant/Client Approval.
- Follow Up the Site Works And Troubleshooting of Mechanical Hindrances & Reporting to the Mechanical Senior Engineer.
- Liaising and Coordination with Clients, Contractors and Sub-Contractors.
- Attending Meetings on Site.

- AC System Design and Maintenance