QC QA Electrical Engineer
King Abdullah University Of Science And Technology
Total years of experience :14 years, 9 Months
Company : NESMA AND PARTNERS.
Position : Electrical QC Supervisor.
Duration : June 2019 to Until Present.
Project : KAUST UTILITY PROJECT KCUP2 @ KAUST (king Abdullah University of science and technology) Project in Thuwal.
Company : NESMA AND PARTNERS.
Position : Electrical QC Supervisor.
Duration : July 2016 to June 2019
Project : DOW ME @ INNOVATION CENTER @ KAUST (king Abdullah University of science and technology) Project in Thuwal.
Company : NESMA AND PARTNERS.
Position : Electrical QC Inspector (SAUDI ARAMCO Approved).
Duration : November 2015 to July 2016
Project : KAUST Building Renovation & New Housing in Thuwal.
Duties & Responsibilities:
Checking and inspection of all materials as per the standard specification (such as NFPA 72 & 70, SAIC, SATIP, Schedule Q, SAES).
Preparing Inspection request (RFI) and update status and rectify the SAPID Comment.
Prepare Checklist (SAIC) & Explanation properly to the SAPID during our inspection.
Checking routing and Installation of Electrical work (Conduits, Wiring Devices, Lighting Fixture, Grounding, Lightning System & cable tray) as per Drawing.
Follow up the Construction Work with site engineer & Construction Manager (Two week ahead Schedule).
Studies drawings and specification and checking Standards.
Preparing the punch list and non-conformance and corrective report (NCR).
Inspection of All kind of Conduit, Cables, Cable tray, Breakers & Panels.
Checking site irregular activities during installation and site surveillance time and make report to construction department.
Make the material inspection (MIR) and arrange the inspection with SAPID.
Witness for Cables & Wires, Existing Panel testing with PID and Proponent.
Closing EIL items with PID and Proponent.
Monitor Quality control on construction progress activities.
Responsible for test packages documentation from pre-commissioning to final hand over to client.
Project : KAUST Utility Expansion Project (SWRO & PWT) @ KAUST Project in Thuwal.
Duties & Responsibilities:
• Checking and inspection of all materials & Installation as per the standard specification (such as ISO, International Standard, HOK & KAUST Standard).
• Preparing the punch list (LBE) and non-conformance and corrective report (NCR).
• Checking site irregular activities during installation and site surveillance time and make report to Project QA Manager and construction department.
documents...ETC
• Inspect and witnessing the Electrical Equipment (MV Switchgear (13.8KV & 4.16KV, MV & LV Motors, MCC, Transformers, Panel board, Generator ) and Instrumentation panel and Devices (PLC, DDCP, IRP, VMS, FIT, Self cleaning Filter panel, AOV, PIT, DPT )
• Inspecting and witnessing the DC Charger, AC UPS and Battery Bank, Fire alarm System.
• Making up the inspection as well as communicating with the client to coordinate installing and removing of existing plant equipment in accordance with shutdown dates.
• Making a Supervising and inspecting, witnessing testing for Existing Running plant MV Motors, MV Switchgear, MCC, PLC, LCS and Terminal JBs as per Shutdown Schedules.
• Witness the FAT (Factory acceptance test) at Factory for MCC, Switchgear, Load Bank, RMU, Transformers, Panelboard, LV & MV Motors, DC Charger, AC UPS and AFD, PLC as per Project Specification and Standards.
• Inspecting the instrumentation devices and reviewing the devices as per P&ID, ISS, Hook up, ILD and interconnection drawing and Preparing loop folder.
• Inspect and supervising of installation MOV, Motors, Generator, Local Control Panel, Instrument SS Tubing and capillary Tube, Pressure Gauges, Air Compressor, Instrument JBs….ETC
• Testing and witnessing the insulation resistance test and Hi pot for MV cables, IR test for LV cables and Grounding resistance test for Earth Rod.
• Make the material inspection (MIR) and arrange the inspection with KPID.
• Performing internal auditing within organization as per ISO 9001:2015 Lead Auditor (Quality Management System) and making report to QA manager and Project manager.
• Responsible for test packages documentation from pre-commissioning to final hand over to client.
• Closing EIL items with PID and E&PM and other department & Proponent.
Work Experiences: Company : NESMA AND PARTNERS. Position : Electrical & Instrumentation QC Supervisor. Duration : July2016 to September 2019 Project : DOW ME @ INNOVATION CENTER @ KAUST (king Abdullah University of science and technology) Project in Thuwal.
Duties & Responsibilities:
• Checking and inspection of all materials & Installation as per the standard specification (such as ASTM, UL, IEC, IEEE, HOK & KAUST Standard).
• Preparing the punch list (LBE) and non-conformance and corrective report (NCR).
• Checking site irregular activities during installation and site surveillance time and make report to construction department.
• Inspecting and supervising the installation and termination of Electrical Equipments and panel, Emergency System, Grounding, Lightning protection as per Approved drawing and Standards.
• Witness SAT (Site Acceptance Test) for Electrical Equipments & Panel and instrumentation Panel and Devices.
• Ensure that the work being carried out is in good Engineering Practice and conforms to Project Specification& standards (ANSI, IEC, ISO, BS, TIA, BICSI TDMM, ASHRAE….ETC)
• Supervise and inspect the installation and termination of AV Rack, SACS, Telecom cabinet, Fiber optic cables.
• Inspecting the Termination and Witnessing the Fiber optic cables and CAT 6 Communication cables testing.
• Inspect the instrumentation devices and reviewing the devices as per P&ID, ISS, Hook up, ILD and interconnection drawing.
• Inspection of Fire alarm panel and devices installation and termination.
• Witness FAT (Factory acceptance test) for MCC, Switchgear, MV Cables, Panelboard and Generator as per as per Scope of Work, Project Specification and Standards.
• Inspect the installation of Grounding System (EMGB, TMGB, MIGB and MSG, MRG) as per Standard and Approved drawing and witness the testing.
• Make the material inspection (MIR) and arrange the inspection with KPID.
• Closing EIL items with PID and E&PM and other department & Proponent.
• Monitor Quality control on construction progress activities.
Position : Electrical QC Inspector. (Aramco Approved) Duration : November 2015 to June 2016 Project : KAUST Building Renovation & New Housing in Thuwal.
Duties & Responsibilities:
• Checking and inspection of all materials as per the standard specification (such as NFPA 72 & 70, ASTM, UL, IEC, IEEE, SAIC, SATIP, Schedule Q, SAES).
• Preparing Inspection request (RFI) and update status and rectify the SAPID Comment.
• Prepare Checklist (SAIC) & Explanation properly to the SAPID during our inspection.
• Checking routing and Installation of Electrical work (Conduits, Wiring Devices, Lighting Fixture, Grounding, Lightning System & cable tray, Panels, MCC…ETC) as per Drawing.
• Follow up the Construction Work with site engineer & Construction Manager (Two week ahead Schedule). Studies drawings and specification and checking Standards.
• Preparing the punch list and non-conformance and corrective report (NCR).
• Checking site irregular activities during installation and site surveillance time and make report to construction department.
• Make the material inspection (MIR) and arrange the inspection with SAPID.
• Witness for Cables & Wires, Existing Panel testing with PID and Proponent.
• Closing EIL items with PID and Proponent.
• Monitor Quality control on construction progress activities.
• Responsible for test packages documentation from pre-commissioning to final hand over to client.
Position : Electrical QC Inspector. (Aramco Approved) Duration : November 2015 to June 2016 Project : KAUST Building Renovation & New Housing in Thuwal.
Duties & Responsibilities:
• Checking and inspection of all materials as per the standard specification (such as NFPA 72 & 70, ASTM, UL, IEC, IEEE, SAIC, SATIP, Schedule Q, SAES).
• Preparing Inspection request (RFI) and update status and rectify the SAPID Comment.
• Prepare Checklist (SAIC) & Explanation properly to the SAPID during our inspection.
• Checking routing and Installation of Electrical work (Conduits, Wiring Devices, Lighting Fixture, Grounding, Lightning System & cable tray, Panels, MCC…ETC) as per Drawing.
• Follow up the Construction Work with site engineer & Construction Manager (Two week ahead Schedule). Studies drawings and specification and checking Standards.
• Preparing the punch list and non-conformance and corrective report (NCR).
• Checking site irregular activities during installation and site surveillance time and make report to construction department.
• Make the material inspection (MIR) and arrange the inspection with SAPID.
• Witness for Cables & Wires, Existing Panel testing with PID and Proponent.
• Closing EIL items with PID and Proponent.
• Monitor Quality control on construction progress activities.
• Responsible for test packages documentation from pre-commissioning to final hand over to client.
Company : NESMA AND PARTNERS.
Position : Electrical QA/QC Engineer.
Duration : Sep 2014 to October 2015 ( Previously June 2011 to June 2012)
Project : JODP in Makkah Phase 1 (High Rise building Construction)
Duties & Responsibilities:
Checking and inspection of all materials as per the standard and JODP specification (such as NEC, NFPA & NEMA)
Preparing Inspection request (IR) and update status from consultant and rectify the consultant Comment. Explanation properly to the consultant during our inspection.
Checking routing and Installation for lighting and Power System.
Follow up the Construction Work in the site engineer.
Inspection of cable tray, cable trunk, cable ladder, Busway, cables, panel board & all type of Lighting Fixture (Chandelier), Power Socket. Studies drawings and specification and checking Standards.
Preparing the punch list and non-conformance and corrective report (NCR) and Inspection testing plan (ITP).Checking site store report voucher (SSRV) and make the material inspection (MIR) and arrange the inspection with consultant.
Inspection of lighting system, power system, central battery system and cable routing system for Electrical works.
Inspection of all Fire alarm System, Evacuation & Public address speaker for low current as per standard specification.
Excellent hands hold skills of Process automation system and BMS system, Communication System (PABX, CCTV, SACS, PA, Intercom and Telephone).
Checking site irregular activities during installation and Make site surveillance and make report to construction department.
Inspect the installation and Commissioning for all electrical equipment such as motor, panel board, Transformer, Switch gear, MDB and electrical device.
Inspection of Panel Board (DP, EDP), Motor control center (MCP &EMCP), Transformer, Switch gear, MDB and generator.
Witness and verify Continuity, Insulation resistance test for LV, MV Cables.
Monitor Quality control on construction progress activities.
Position : Electrical QA/QC Engineer. Duration : Sep 2014 to October 2015 (Previously June 2011 to June 2012) Project : JODP in Makkah Phase 1 (High Rise building Construction) Duties & Responsibilities:
• Checking and inspection of all materials as per the standard and JODP specification (such as UL, ASTM, NEC, NFPA & NEMA)
• Preparing Inspection request (IR) and update status from consultant and rectify the consultant Comment. Explanation properly to the consultant during our inspection.
• Checking routing and Installation for lighting and Power System. Follow up the Construction Work in the site engineer.
• Inspection of cable tray, cable trunk, cable ladder, Busway, cables, panel board & all type of Lighting Fixture (Chandelier), Power Socket. Studies drawings and specification and checking Standards.
• Preparing the punch list and non-conformance and corrective report (NCR) and Inspection testing plan (ITP).Checking site store report voucher (SSRV) and make the material inspection (MIR) and arrange the inspection with consultant.
• Inspection of lighting system, power system, central battery system and cable routing system for Electrical works and Fire alarm System, Evacuation & Public address speaker for low current as per standard specification.
• Excellent hands hold skills of Process automation system and BMS system, Communication System (PABX, CCTV, SACS, PA, Intercom and Telephone).
• Checking site irregular activities during installation and Make site surveillance and make report to construction department.
• Inspect the installation and Commissioning for all electrical equipment such as motor, panel board, Transformer, Switch gear, MDB and electrical device.
• Inspection of Panel Board (DP, EDP), Motor control center (MCP &EMCP), Transformer, Switch gear, MDB and generator.
• Witness and verify Continuity, Insulation resistance test for LV, MV Cables.
Company : NESMA & PARTNERS, JUBAIL
Position : Electrical QC Inspector.
Duration : Dec 2013 to Aug 2014
Project & Client: SADARA (Chemical & Gas Plant Power Distribution Bldg.) / Fluor
Duties & Responsibilities:
Checking and inspection of all materials as per the standard specification (SADARA Standards, NEMA, NFPA, NETA and Saudi Aramco Standards)
Preparing Inspection request (RFI) and rectify the Client QC Comment.
Prepare Checklist & Explanation properly to Client QC (Fluor) during our inspection.
Checking routing for Raceways and Inspection of Material & Installation for Electrical Equipment (230 KV & 34.5 KV Transformer, 34.5 KV & 480V Switchgear, EPMS, 480V MCC, Battery Charger, Isolation Switch, Neutral Grounding Resistance, Power & DC Distribution Panel).
Follow up the Construction Work with site engineer & Construction Manager and handling team work.
Inspection of Lux Test for Lighting Fixtures, Mandrel Test for Duct Bank & Conduits, under conduits.
Inspection of Lightning Protection system for Power Distribution Building.
Inspection of Material and Installation for all kind of Conduit, Cables, Cable tray, Lighting Fixture, Power system devices and Fire alarm system devices in Indoor & Outdoor area.
Preparing the punch list (Pro-Active & Surveillance Report) and non-conformance and corrective report (NCR).
Inspect the installation of Grounding Rod, Test Well, Embedded Pad & Bars and grounding for all electrical equipment.
Monitoring the work of a third party independent qualified inspection and testing agency for the Electrical Equipments.
Witness and verify Insulation Resistance test for Low Voltage Cables, HIPOT test for Medium Voltage Cables & High Voltage Cable (34.5 KV & 230 KV) & Bus bar.
Witness for Pre-commissioning of Transformer, Switchgear, MCC, EPMS, Power Panel & Circuit Breakers, Motor and Generator.
Preparing Packages (MCDR) for Mechanical Completion certificate to final hand over to client.
Position : Electrical QC Inspector. (Aramco & Flour Approved) Duration : Dec 2013 to Aug 2014 Project & Client: SADARA (Chemical & Gas Plant Power Distribution Bldg.) /
Fluor Duties & Responsibilities:
• Checking and inspection of all materials as per the standard specification (SADARA Standards, NEMA, NFPA, NETA and Saudi Aramco Standards)
• Preparing Inspection request (RFI) and rectify the Client QC Comment.
• Prepare Checklist & Explanation properly to Client QC (Fluor) during our inspection.
• Checking routing for Raceways and Inspection of Material & Installation for Electrical Equipment (230 KV & 34.5 KV Transformer, 34.5 KV & 480V Switchgear, EPMS, 480V MCC, Battery Charger, Isolation Switch, Neutral Grounding Resistance, Power & DC Distribution Panel).
• Follow up the Construction Work with site engineer & Construction Manager and handling team work.
• Inspection of Lux Test for Lighting Fixtures, Mandrel Test for Duct Bank & Conduits, under conduits.
• Inspection of Lightning Protection system for Power Distribution Building.
• Inspection of Material and Installation for all kind of Conduit, Cables, Cable tray, Lighting Fixture, Power system devices and Fire alarm system devices in Indoor & Outdoor area.
• Preparing the punch list (Pro-Active & Surveillance Report) and non conformance and corrective report (NCR).
• Inspect the installation of Grounding Rod, Test Well, Embedded Pad & Bars and grounding for all electrical equipment.
• Monitoring the work of a third party independent qualified inspection and testing agency for the Electrical Equipments.
• Witness and verify Insulation Resistance test for Low Voltage Cables, HIPOT test for Medium Voltage Cables & High Voltage Cable (34.5 KV & 230 KV) & Bus bar.
• Witness for Pre-commissioning of Transformer, Switchgear, MCC, EPMS, Power Panel & Circuit Breakers, Motor and Generator.
• Preparing Packages (MCDR) for Mechanical Completion certificate to final hand over to client.
• Checking and inspection of all materials as per the standard specification (such as NFPA 72, 2001, SAIC, SATIP, Schedule Q, SAES)
• Preparing Inspection request (RFI) in the QMIS and update status from the QMIS and rectify the SAPID Comment.
• Prepare Checklist (SAIC) & Explanation properly to the SAPID during our inspection and Make Aramco Site access for SAPID.
• Contacting MCI Walkthrough with Fire Department & Loss prevention team, Project management Team & PID.
• Checking routing and Installation for Fire System Layout Drawing.
• Follow up the Construction Work with site engineer & Construction Manager (Two week ahead Schedule).
• Inspection of All kind of Smoke detector, cables, panel board (FACP), Horn & Strobe, Manual Release Station, and Manual Pull Station & Abort Station.
• Studies drawings and specification and checking.
• Preparing the punch list and non-conformance and corrective report (NCR).
• Inspection of All kind of Conduit, Cables, Cable tray.
• Checking site irregular activities during installation and site surveillance time and make report to construction department.
• Supervising the installation of grounding for all electrical equipment.
• Make the material inspection (MIR) and arrange the inspection for SAPID.
• Witness and verify Continuity, Megger, Component testing for Instrument Cable, Medium Voltage Cables & Wires.
• Monitor Quality control on construction progress activities.
• Responsible for test packages documentation from pre-commissioning to final hand over to client.
Position : Electrical QC Inspector. (Aramco Approved) Duration : Aug 2012 to Oct 2013 Project : BI-10-00570 (Halon phases out IT Facilities) Duties & Responsibilities:
• Checking and inspection of all materials as per the standard specification (such as NFPA 72 & 70 (NEC), SAIC, SATIP, Schedule Q, SAES)
• Preparing Inspection request (RFI) in the QMIS and update status from the QMIS and rectify the SAPID Comment.
• Prepare Checklist (SAIC) & Explanation properly to the SAPID during our inspection and Make Aramco Site access for SAPID.
• Contacting MCI Walkthrough with Fire Department & Loss prevention team, Project management Team & PID.
• Checking routing and Installation for Fire System Layout Drawing.
• Follow up the Construction Work with site engineer & Construction Manager (Two week ahead Schedule).
• Inspection of All kind of Smoke detector, cables, panel board (FACP), Horn & Strobe, Manual Release Station, and Manual Pull Station & Abort Station.
• Preparing the punch list and non-conformance and corrective report (NCR).
• Inspection of All kind of Conduit, Cables, Cable tray & Panels.
• Checking site irregular activities during installation and site surveillance time and make report to construction department.
• Make the material inspection (MIR) and arrange the inspection with SAPID.
• Witness for FACP Site Acceptance test (SAT) with PID, PMT, Loss and Prevention Team, Proponent...etc.
• Responsible for test packages documentation from pre-commissioning to final hand over to client.
• Checking and inspection of all materials as per the standard specification
• Preparing Inspection request (IR) and update status from consultant and rectify the consultant Comment.
• Checking routing and Installation for lighting and Power System.
• Follow up the Construction Work in the site engineer.
• Inspection of cable tray, cable trunk, cable ladder, Transformer, cables, panel board and isolators.
• Studies drawings and specification and checking.
• Preparing the punch list and non-conformance and corrective report (NCR).
• Closing Non-conformance report and preparing Inspection testing plan (ITP).
• Checking site store report voucher (SSRV) and conduct material inspection.
• Inspection of lighting, power, central battery and cable routing for Electrical system.
• Inspection of Fire alarm, Smoke Detector, CCTV and Evacuation speaker for low current as per standard specification.
• Checking site irregular activities during installation and site surveillance time and make report to construction department.
• Explanation properly to the consultant during our inspection.
• Supervising the installation of grounding for all electrical equipment such as motor, panel board, cable tray, transformer and electrical device.
• Laying the underground cable and maintenance.
• Inspection of all type of conduits, lighting fixture, boxes, wiring, cables.
• Make the material inspection (MIR) and arrange the inspection for consultant.
• Witness and verify Continuity, Merger, HI-POT and Component testing for Medium Voltage & Low Voltage equipment.
• Monitor Quality control on construction progress activities.
• To implement Electrical work complying to materials specification and standard.
• To supervise and maintain proper method of Electrical work practices.
• To request necessary materials required during operation on site.
• Prepares electrical power and hydraulic tools.
• Supervise the electrical motor engine for safety.
• Act as electrical maintenance of the whole plant.
• Performs installation of single phase and three phase motor.
• Observed safety procedures in electrical installation.
• Conduct of inspection of all electrical work as required.
• Checking all electrical machinery and equipment control system.
• Plans & set standby power unit.
• Install wiring devices for floor & ground fault current.
• Layout of wires & cables for those equipment & terminal the name according to drawing & diagrams.
• Ensuring minimum electrical faults and rectifying errors.
• Ensuring minimum expenditure on power and maintenance
• Making of daily progress and monthly progress and invoice making for Electrical works.
• Proper utilization of given machines, Equipments, Consumables and Man power.
• Recruiting Man power.
• Preventive maintenance.
• Proper utilization of given funds
Position : Electrical Site Engineer Duration : June 2010 to May2011 Duties & Responsibilities:
• To implement Electrical work complying with materials specification and standard. Supervise and maintain proper method of Electrical work practices.
• To request necessary materials required during operation on site. Provide electrical power and hydraulic tools.
• Supervise the electrical motor for safety and electrical maintenance of the whole plant. Performs installation of single phase and three phase motor and observed safety procedures in electrical installation.
• Preparing Method of Statement for all Electrical works. Checking all electrical machinery and equipment control system before Installation.
• Install wiring devices for all Electrical system. Layout of wires & cables for those equipment & terminate the name according to drawing.
• Ensuring minimum electrical faults and rectifying errors. Ensuring minimum expenditure on power and maintenance
• Making of daily progress and monthly progress and invoice making for Electrical works. Erection of Panel boards, Installation of Transformers, motor and cabling of distribution lines.
• Proper utilization of given machines, Equipments, Consumables and Man power. Recruiting Man power, Preventive maintenance, Proper utilization of given funds.
Position : Maintenance Engineer Duration : June 2009 to April 2010 Duties & Responsibilities:
• Testing of electrical cables such as continuity test and insulation resistance test by Megger. Supervising and maintenance of electrical machines such as motors, generator, transformer…etc. Installation of electrical machines and makes sure the testing before installing. Supervising and monitoring the status
of machine.
• Witnessing testing for transformer such as insulation resistance test by Megger and Preparing Preservation list for weekly. Supervising the installation of grounding for all electrical equipment such as motors, generators and prepare daily work reports to the project manager.
• Supervision of Cable Termination and Cable laying. Installation of Electrical lighting system and power system as per drawing procedure. Working of MS conduit installation and internal wiring. Carrying Preventive scheduling maintenance periodically.
• Implement and adheres safety process, rules and regulations and standard operating procedure. Making of daily progress and monthly progress and invoice making for Electrical works.
• Bachelor of Engineering (Electrical And Electronics) Annamalai University, Chidambaram, Tamilnadu, India. (71.20%)
