Mohamed Essam Eldin Mohamed Abdallah

Manage Technical department (Engineering & Commercial), Tendering Department, Cost Control
Department, Planning Department, Procurement and Contracts Administration.

- Leader Quantity Surveyors in the tender and post contract functions.

- Responsibilities for all cost estimating, cost planning, cost studies, cost monitoring and controlling, measurement.

- Cost planning and commercial management throughout the entire life cycle of the project from inception to post-completion.

-Risk management and calculation.

- Procurement advice and assistance during the tendering procedures.
- Tender analysis and agreement of the contract sum.
- Commercial management and contract administration.

- Preparing bill of quantities (BOQ) and tender document, drafting contract conditions.

- Effectively contracts negotiation.

- Assessment of contractor’s claims and advice on contractual disputes.

- Effectively manage internal budget control, advice on cost limits and budgets.

- Undertaking cost analysis for construction works.

- Study on procurement strategy with purchasing manager and advising on favorable strategy to reduce cost.

- Manage all technical procedures such as design, estimation, material ...

- Analyses the technical specifications, contract and project scope of work.

- Plan and monitor the drawing submission schedule in cooperation with the client according to the contract and site requirements.

- Plan and monitor the material budget in cooperation MRP.

- Provide technical advice and assessment on all kind of material components related to the companys project works to ensure compliance with the project specification.

-Review all drawing submissions prior to submittal.

-Ensure the drawings; calculations and engineering submissions gain client approval prior to production Submission and site installation and final submission with as-built condition as per contract programmed.

- Coordinate, describe and arrange mock-ups / performance testing to meet the contract requirement.

- Ensure that all technical information and drawings for the project are issued on time for both production and installation.

Technical Director at Head Quarter Manage and Supervise the following Projects:
 Eastown New Cairo block 34 Residential Compound comprises 11 Semi Finished
Multi Story Buildings (Ground + 5 Repetitive floors) of different Models and areas
Scope of works includes; skeleton, interior finishes, exterior finishes and general site
works.
# Project Value: 150 Million EGP
# Location: New Cairo
# Area: 38, 500 m2
# Owner: SODIC
 Villette Condos Second Phase of the Residential Compound comprising of 18 Core &
Shell consisting of a Basement, Ground floor and four repetitive floors of different
Models and areas, In addition to 11 Town Houses (G+2). Scope of works includes;
skeleton works & exterior finishes and general site work.
# Project Value: 393 Million EGP
# Location: New Cairo
# Owner: SODIC
 Arab League-Extension Turn Key administrative building of basement, ground and
four repetitive floors on a built up area of 12, 000 m2. The scope of work include:
piles, skeleton works, interior & exterior finishes, all MEP works including electrical
works, elevators, HVAC, firefighting, fire alarm, CCTV and landscape works.
# Project Value: 280 Million EGP
# Location: Tahrir Square - Cairo
# Owner: League of Arab States.
 Holiday Inn Hotel 4 stars hotel comprising 157 rooms, including 4 meeting rooms, 3
event venues for 1000 person, swimming pool, SPA & GYM. Scope of works for
this phase includes the all of the civil works and preliminary finishes.
# Project Value: 90 Million EGP
# Location: Assiut
# Owner: Mabany Edris
 Other Projects
October plaza
Block 06 (Six West)
Rofayda Health park
Block 36
Beltag WWTP
Job Description:
1- Review detailed design drawings and specifications.
2- Supervise and review the preparation of construction method statements with
construction personnel.
3- Planning and maintaining project budget and schedules.
4- Take part in the project management review and risk management review.
5- Attend progress meetings, discuss and suggest technical proposals.
6- Managing the cost analysis and cost control of site activities.
7- Review third-party invoices & client invoices.
8- Follow-up with subcontractors during negotiations and offer award or
subcontract terms, performance and payments.
9- Maintaining organized and detailed project records.
10- Preparing technical and material submittals.
11- Coordinating between the construction and engineering teams ensuring that
the construction requirements are conveyed to the engineering teams and that
the engineering deliverables satisfy the construction requirements.
12- Coordinating with quantity surveyors or payment appreciations and change
orders.
13- Taking part in selection process of subcontractors and suppliers for projects.
14- Preparing and reviewing subcontractors invoices.
15- Taking part in the contractual aspect of projects.
16- Maintaining organized and detailed records and documents of all projects
(i.e. working drawings, quantity surveying, purchase orders … etc.) and
coordinating with different teams to get these documents issued.
17- Checking the quality of the work executed.
18- Planning and preparing project paperwork and updating it regularly in liaison
with the Project Manager.
19- Lead and manage the technical arm (QS, QC, shop drawings, invoicing,
dealing with Projects Engineer, etc.).
20- Preparing Variations or Claims due to cost and time impact.
21- Coordinate the architectural designs, drawings, and specifications for new
and revised structures.
22- Prepare and Review shop drawings and follow up drawings amendments
during the implementation process
23- Preparation of As-built drawings.
24- Implement cost effective measures for reducing project cost
25- Prepare budgets, bids, and contracts, and direct the negotiation of research
contracts.
26- Follow up time schedule Plan and looking ahead.

- Technical office manager for Oman Embassy
project in Riyadh-KSA (project value 65 million).
- Technical office manager for Althager plaza project in Diriyah-Riyadh (two phases Structural & MEP contracts- project
value 70 million).
- Senior structural engineer for classic tower project in Olaya-Riyadh (project value 120 million).
Job Description:-
A) Prepare all required civil & structural and architectural shop drawings and the As Built Drawings for approval.
B) Supervise and review the preparations of construction method statements with construction personnel.
C) Preparing technical and material submittals.
D) Planning and maintaining project budget and schedule Planning.
E) Attend progress meetings, discuss and suggest technical proposals.
F) Take part in the project management review and risk management review.
G) Coordinate between the construction and engineering teams ensuring that the construction requirements are conveyed to the engineering teams and that the engineering deliverables satisfy the construction requirements.
H) Managing the cost analysis and cost control of site activities.
I) Coordinate with quantity surveyors or payment appreciations and change orders.
J) Review subcontractors invoices.
K) Follow-up with subcontractors during negotiations and offer award or subcontract terms, performance and payments.
L) Documenting project issues/conditions.
M) Maintaining organized and detailed project records.
N) Design and prepare all required calculations according to any changes happen.
O) Prepare the invoices for our Clients & our Subcontractor.
P) Technical Coordination between the structural & architectural & Electrical & Mechanical and plumping drawings For Coordination drawings Approval Submittal.
Q) Prepare the cost analysis & estimation the projects with the budget.
R) Prepare the variation orders & claims.
S) Perform any structural analysis with 3D Modeling.
T) Steel structure engineer (Design & Erection any steel structural).
U) Pre-Engineered Buildings (PEB) Engineer.
V) Coordinate with steel structure manufacturer by reviewing the modeling analysis & the design to meet the consultant requirements within our budget &
Solving any problems during the steel structure construction & coordinate with the factory by studying the erection drawings and reviewing the delivery notes for preparing the steel members checklist to avoid Any missing members during construction or delaying in the construction process.
W) Building Information Modeling (BIM) Engineer.
X) Prepare the project time schedule master plan and the updated recovery plan for any changes or variation order happen.
Y) Prepare the weekly & monthly dashboard reports.

A) Check / review Contractors shop drawings for all structural works, including
coordination with all the electrical, mechanical, specialist disciplines and architectural requirements of the project and with all the regulatory
requirements.
B) Implement the contract documents requirements, such as design drawings, specifications, Bill of Quantities, contract conditions, etc. on site.
C) Review / check and recommend the correct completed progress percentages of all civil and structural activities to the client / CM for Contractors Monthly Payment Applications.
D) Check, review and approve all the civil and structural materials submittals, proposals, calculations and samples. Refer any complicated design issues to the designer office for assistance in review.
E) Inform Resident Engineer and Head of Structures immediately if any serious incident occurs which could affect the safety, stability, serviceability or
durability of the structure, adjacent structures, (or temporary structures), whether in the short or long term. If appropriate, instruct emergency
procedures to avoid accidental damage.
F) Inspect the civil and structural materials delivered to the project site for compliance with approved materials data / samples. Ensure that testing of the
materials is carried out in accordance with the project specifications and relevant codes/standards. Reject and ensure removal and replacement of
noncompliant materials.
G) Check quality of civil and structural works to ensure compliance with the contract specification requirements, method statements and approvals.
H) Review and approve the As Built drawings.
I) Review and comment on contractor’s method statements, quality plans and safety plans.
J) Carry out regular periodic inspections at the site to ensure that safety standards
are being maintained (e.g. scaffolding, formwork, ladders, shoring, dewatering, etc.)
K) Ensure that subordinates on the site are fulfilling their duties correctly with
respect to the day to day supervision of the civil and structural works.
L) Respond to contractors RFIs related to civil/structural works. Coordinate the
designer office if additional design information is required.
M) Assist in preparation and issue of Taking Over and Final Completion Certificates for the building works.

A) Implements project safety plan in my section and takes all necessary measures to emphasize the same.
B) Implements project quality plan in conformity to project quality manual and suggest improvement when deficiency is found.
C) Submits all my section requirements of material, equipment, tools and manpower to the PM in a timely manner.
D) Addresses and apprises to PM all problems and concerns encountered and assist to resolve them.
E) Prepares daily and weekly production reports using project approved forms and states major problems encountered.
F) Monitors and closely supervises the progress or works on a daily basis and immediately rectifies deficiencies where found.
G) Checks on a regular basis the quality of work in my section and ensures that my staffs are adequately trained to execute efficiently their duties.
H) Initiates daily the Work Inspection Request (WIR) and Inspection Check List (ICL) and forwards to the QCE.
I) Ensures that all works are carried on as per the approved project documents and notifies PM for discrepancies found.
J) Ensure that only approved materials are used to execute the works.
K) Ensures that the most updated and recent versions of approved drawings are applicable on site and the old drawings are to be stamped superseded and withdrawn from the site team.
L) Prepares Method Statement and Work Procedures where required and reviews them with the PM before submission.
M) Prepares on daily basis the concrete order requirements and reviews with PM before ordering.
N) Attends all scheduled meetings.
O) Initiates NCRs where necessary.
P) Responsible for allocation of manpower on daily basis.
Q) Ensures that no activity is being carried out without supervision.
R) Controls and supervises directly the general foreman, trade foreman, surveyors and subcontractors within his area.
S) Ensure proper care of all equipment and furniture entrusted for my use and use of employees reporting to me, such as computer, calculators and general office equipment.
T) Coordinate and liaise with Company departments regarding information required
for reports, budgets and forecasts whether daily, weekly or monthly.
U) Maintains close relations with client companies so as to ensure smooth business relationship.
V) Must possess ability to deal effectively with all levels of management within the
Company and to accomplish objectives through personal relationships in areas where little formal authority exists.
W) Ensures that confidential records and other confidential information is properly
safeguarded and is not removed from the office.
X) Do not disclose any financial information or any other information of the Company to a competitor.
Y) Carry out any other duties and responsibilities that may be assigned by the Branch Manager, Project Manager and/or Operations Manager from time to time.

 Provide structural design details using AUTOCAD and to carry full calculations as
instructed by Director and Senior Engineers.
 Site supervision and inspection as required and as directed.
 Liaison with Architects, Contractors and Local Authorities.
 Provide design and details for site as needed, shop drawings and as built drawings
when required and as directed by Senior Engineers.
 Reviewing shop drawings and as built drawings.
 Preparation of Structural Proposals and sketches as required and under Senior
Engineer.

The main job is to prepare structural design (structural calculations and drawings) for both
steel and concrete structures using, mainly, (ECC 203-2001) in the design and (ACI) for
the design of some steel structures.
a) Work AS Designer Steel Structures Such as:-
1) cement Factories :- Such as
 South Valley Cement Company.
Design These Buildings:-
o Additive Crusher.
o Additive storage.
o Belt conveyor.
o Preheater.
 Project Beni Suef Increasing Capacity.
 Strengthening Cement Mill OF Jordan.
 Preheater Tower Rashadiya Project.
2) Sugar Factories:- Such as
 United Sugar Company Of Egypt (USCE).
3) Others: - Such as
 Maintenance Workshop with Office Building (BMW).
 Qatar Steel Factory.
 The President El Selahs Mosque.
b) And Work As Designer Concrete Structures Such as:-
 New Exhibition & Maintenance Workshop Project in Alexandria
(Ghabbour Group).
 Design Villas in Madenty.
 Yassin Village.