Submitting more applications increases your chances of landing a job.

Here’s how busy the average job seeker was last month:

Opportunities viewed

Applications submitted

Keep exploring and applying to maximize your chances!

Looking for employers with a proven track record of hiring women?

Click here to explore opportunities now!
We Value Your Feedback

You are invited to participate in a survey designed to help researchers understand how best to match workers to the types of jobs they are searching for

Would You Be Likely to Participate?

If selected, we will contact you via email with further instructions and details about your participation.

You will receive a $7 payout for answering the survey.


User unblocked successfully
Mohammad Murtuza Ansari, HSE Engineer

Mohammad Murtuza Ansari

HSE Engineer·Parsons - United Arab Emirates

United Arab Emirates

Diploma, DIPLOMA IN FIRE SAFETY

Work experience

Total years of experience: 25 years, 0 months

HSE Engineer

January 2017 - Present

Parsons - United Arab Emirates

Dubai, United Arab Emirates

January 2017 - Present

PROJECTS:
Dubai Creek Harbour: Internal roads and external highway intersections, Iconic Bridges and other Structures, Electrical (HV and LV) networks, Telecoms networks, Potable Water network, Irrigation and DCP Make Up Water Pump Station & Networks, Fire-fighting network, Sewerage Network, Storm water drainage Network, Street lighting and traffic signals & Gas Plant and network

Responsibilities:
• Integrate SH&E into each operation by promoting worker involvement in the work planning and hazard identification process.
• Maintain active and visible involvement using open communication with employees and stakeholders regarding SH&E issues on the project.
• Review all HSE Plan/Procedures & method statements submitted by contractors for project areas assigned
• Manage the site and interface with clients, contractors, and third parties in a manner consistent with contract agreements and the applicable standards of reasonable care.
• Develop and maintain the project’s legal compliance register.
• Assist with developing and maintaining the Project Safety Health & Environmental Plan (PSHEP) and amend it when project activities or conditions change.
• Verify that Parsons’ employees and contractor supervisors have been issued a current copy of the PSHEP before commencing field activities.
• Assist with verifying that Parsons employees, contractors, and stakeholders have completed and documented required SH&E awareness, compliance and specialty training (e.g., fall protection, energy isolation/hazardous energy control, confined space entry, hazard communication, use of personal protective equipment) and have the necessary qualifications, certifications, competencies, and medical clearances needed to perform their work.
• Develop and assist with conducting SH&E orientation sessions for project stakeholders prior to allowing them to enter project work areas.
• Verify that the project complies with the requirements of the PSHEP and applicable contractor SSHEPs.
• Coordinate emergency responses (or ensure that emergency response roles are assigned) and ensure that emergency action drills are conducted.
• Post information and SH&E jobsite posters as required at the established sites.
• Verify that safety meetings are conducted and documented throughout the course of the project (as tasks, hazards, or risks change).
• Verify that project SH&E forms and permits are being used as outlined in the PSHEP.
• Perform assessments of contractor SH&E practices in accordance with the PSHEP, and verify that project self - assessments, inspection checklists, and engagement/observation protocols are being thoroughly completed by Parsons team members.
• Verify that the project files available to site personnel include copies of the executed contracts, training and medical monitoring records, and site-specific SH&E procedures prior to the start of contractor’s field operations.
• Verify availability, training, and use of appropriate personal protective equipment (PPE).
• Assist with conducting SH&E pre-work briefings for Parsons team members and contractor supervisors.
• Notify the operational chain of command and the SH&E Director (or delegate) of SH&E incidents and near misses. Track the progress and recovery of any injured or ill employees.
• Assist managers and supervisors in conducting incident investigations.
• Maintain SH&E records and documentation.
• Facilitate client or regulatory inspections, including accompanying inspectors and providing all necessary documentation and follow-up.
• Participate in periodic corporate and project SH&E audits

Company industry:
Civil Engineering
Job role:
Safety

Project HSE Manager

March 2016 - January 2017

Al Bandary Engineering Trading & Contracting Company

Doha, Qatar

March 2016 - January 2017

PROJECT:
Al Mana Tower (B6+Ground Floor +56 Floor), Corniche Road, Al Dafna, Doha State of Qatar.

Responsibilities:
• Report directly to Sr. Project Manager.
• Prepared, Established, maintained and implemented the HSE Plan and ensured its follow-up.
• Prepared emergency procedures including evacuation routes and places as well as safety procedures.
• Conducting Mock Drill at the beginning of the project and every 6 months intervals thereafter to measure the effectiveness of emergency evacuation procedures.
• Reviewed HSE management procedures for compliance and to cater for all risks included in hazard analysis such as rescue from heights with standard requirements as well as client HSE manual.
• Coordinated with other department managers to obtained information about activities to be performed to enable planning requiring safety measures.
• Prepared reports for submission to Consultant/Engineer of all reporting system required by the contract.
• Established safety training programs and conducted safety training including toolbox talks.
• Attended weekly safety walkthrough and meetings with Consultant/Engineer and subcontractor’s safety meetings.
• Chaired weekly HSE co-ordination with ABE & Subcontractors site management team
• Advised safety legislation and procedures.
• Controlled and maintained all health and safety related procedures and documents.
• Controlled and verified the appropriateness and effectiveness of the safety equipment, facilities, training and safety measures for Health, Safety and Environment related matters.
• Notified the senior site staff to rectify unsafe activities or work conditions and prohibited the use of the facilities until compliance is confirmed.
• Established and managed the incident investigation team when an incident occurred.
• Performed investigation about incidents and near-misses and disseminated information for preventive measures.
• Audited existing HSE plans to secure effectiveness and accurateness.
• Ensured that all staff received adequate induction training and information with regards to health and safety aspects of their work prior to the commencement of their duties.
• Established, maintained, distributed and updated the HSE management documentation.
• Conducted internal audits to control the operation of the HSE management system.
• Administered non-conformities and corrective actions.
• Attend client safety committee meetings.

Company industry:
Civil Engineering
Job role:
Safety

HSE Specialist

January 2013 - March 2016

Parsons International Limited

Doha, Qatar

January 2013 - March 2016

PROJECTS:
• Construction of Oxygen Park, Education City, Qatar Foundation, Doha State of Qatar
• North East Underground Car Park, Education City, Qatar Foundation, Doha State of Qatar

Responsibilities:
• Report directly to Project Manager/Senior Resident Engineer
• Responsible for the Health and Safety of the Project team ensuring that Parsons and the projects HSE policies and procedures are fully implemented at each phase of the project by all project staff and by contractors under the supervision of the Consultant
• Prepares Heath, Safety and Environment plans & procedures.
• Review all HSE Plan/Procedures & method statements submitted by contractors for project areas assigned
• Monitor the construction activities against the requirements of the project’s health, safety & environment plan, Client HSSE Guidelines & Qatar regulatory requirements.
• Monitors the preparation of method statements by the contractors and their approval by the site supervision team
• Monitors the provision by the consultant and contractor of personal protective equipment
• Monitor the provision by the contractor of health and safety inductions, briefings and toolbox talks.
• Monitors the provision by the Contractor’s off-site safety signage and notice boards.
• Monitors the provision of the Contractor’s off-site security measures.
• Reports on the Contractor’s failure to comply with the requirements of the health, safety and security management system and plan promptly and ensure that immediate and appropriate corrective actions are implemented.
• Issues of health, safety and security incident reports and register every week and when urgent action must be taken.
• Identifies trends in health, safety and security non-compliances and proactively identify with the contractor measures to stop the trends.
• Prepares and submit final reports on health, safety and environment management and include as part of the handover deliverables.
• Reviews contractors on bid list with regard to safety performance, qualifications and programs.
• Conducts safety audits through review and analysis of the performance of safety records and safety inspections of various offices and construction projects in compliance with Parsons SHARP Management System and the project HSE Plan.

Company industry:
Civil Engineering
Job role:
Safety

Safety Adviser & Trainer

August 2011 - October 2012

SARASWATI INSTITUTE OF TECHNOLOGY (SIT ACADEMY)

India

August 2011 - October 2012

• Educating new students to appear in the exam of Diploma in Industrial Safety Management and advising them on any safety related matters.
• Providing regular theory classes & physical training i.e. Basic Rigging & Slinging, Storage, Erection, Dismantling & alteration of Scaffolding, inspection of hand tools & power tools, vehicles inspection with the help of Mechanic using standard checklist in order to educate them & to appear in exams of Diploma in Industrial Safety Management.
• Educating them; how to prepare Emergency Evacuation Procedures and conducting Emergency Mock Drill for the effectiveness of the Mock Drill and recording/observing all positive and negative issues and preparing action plan to resolve negative/deficiencies observed during the Mock Drill.
• Educating them about the accident/incident reporting system, conducting investigation, preparing the report and to inform the operatives to avoid any future accident/incidents.
• Educating them; how to conduct the training i.e. HSE Induction Training for new operatives/workers, how to work in confined space, work permit system and job specific training i.e. how to use Oxy-Acetylene Torch Cutting, Working at height, how to use Personal Protective Equipments, How to inspect the Fire Fighting System i.e. Fire Extinguisher, Hose-reel etc.
• Educating them about the Risk Assessment & how to prepare a RISK ASSESSMENT (Hazards identification, who is at risk, what type of risk and action plan/preventive/control measures).

Company industry:
Primary, Prep, & Secondary School
Job role:
Safety

Site HSE Manager

February 2011 - July 2011

Al-Majal G4S

Riyadh, Saudi Arabia

February 2011 - July 2011

• Directly to Health Safety Report & Environment Director.
• Organizing, planning and implementing the Company Health, Safety & Environmental Policy and procedures.
• Monitoring the performance of all respective Safety officers.
• Mentoring new HSE staffs with the experienced HSE staff.
• Monitoring the effectiveness of the Company HSE Policies & Procedures using ACTIVE & RE-ACTIVE approach i.e. performing audits, inspections, site walk through, surveys, site complaints, accidents/incidents reports, compensations & claims, fine & prosecution and NCR/Non-conformance reports.
• Review of HSE Management Procedures for compliance and to cater for all risks included in hazard analysis e.g. rescue from heights with standard requirements as well as Client HSE Manual.
• Preparing Emergency Evacuation Procedures including evacuation routes & places and performing Mock Drill in the beginning of the project in order to measure the effectiveness of the Emergency Evacuation Procedures and every 6 months intervals thereafter and recording the entire positive and negative/deficiencies for further reference.
• Prepare Risk Assessment and submit to consultant/client for review and approval. After approval, implement the Risk Assessment & monitor thereafter.
• Coordinate with other department managers to obtain information about activities to be performed to enable planning requiring safety measures.
• Attend HSE Committee meeting and prepare action plan to resolve the issues with the consultation of management.
• Attend weekly Safety Walk / meeting with Client & Consultant and Subcontractor’s Safety Meetings.
• Advise on safety legislation and procedures.
• Establish Safety Training Programs, and conduct Safety Training by himself.
• Encouraging Site Supervisors/foremen to conduct Tool box Talks (TBT) and raising HSE related issues during the TBT meeting.
• Encouraging operatives/workers by organizing MOTIVATION SCHEME i.e. Safety Man of the Month, Safety Quiz, and Best Near-miss reported & issuing the appreciation certificate along with some gift item and telephone cards.
• Prepare all HSE related reports (weekly/monthly) for Submission to Consultant/Client according reporting system required by the contract.
• Control and verify the appropriateness and effectiveness of the provided safety equipment, facilities, training, and safety measures for Health, Safety & Environment related matters.
• Notify the senior site staff to remedy unsafe activities or work conditions, and if they do not comply, prohibit the use of the facilities until compliance is confirmed.
• Establish and direct an Incident Investigation Team when an incident occurs in consultation with the Construction Manager.
• Post and circulate information, to ensure that all accidents, incidents and near-misses are investigated, and on safety matters debated at meetings, and any recent incidents, their causes, and preventive measures.
• Ensure that all staff receive adequate Induction training & information with regard to Health & Safety aspects of their work prior to commencement of their duties.
• Establish, maintain, distribute and up-date the H S & E management documentation.
• Control and maintain all Health& Safety related procedures and documents.
• Administer non-conformities and corrective actions.
• Conduct internal audits to control the operation of the H S &E management System.
• Stop the work when a situation on site or on construction related activity endangers lives with consultation of HSE Director and Site Project Manager.

Company industry:
Safety & Environment
Job role:
Safety

Site HSE Representative/Manager

July 2006 - June 2007

ED ZUBLIN AG INTERNATIONAL

Abu Dhabi, United Arab Emirates

July 2006 - June 2007

• Report directly to Site Project Manager and Quality Management Manager.
• Established, maintained and implemented the HS Plan and ensured its follow-up.
• Prepared emergency procedures including evacuation routes and places as well as safety procedures.
• Conducting Mock Drill at the beginning of project and every 6 months intervals thereafter to measure the effectiveness of emergency evacuation procedures.
• Reviewed HSE management procedures for compliance and to cater for all risks included in hazard analysis such as rescue from heights with standard requirements as well as client HSE manual.
• Coordinated with other department managers to obtained information about activities to be performed to enable planning requiring safety measures.
• Prepared reports for submission to Consultant/Engineer of all reporting system required by the contract.
• Established safety training programs and conducted safety training including tool box talks.
• Attended weekly safety walk and meetings with Consultant/Engineer and subcontractor’s safety meetings.
• Advised safety legislation and procedures.
• Controlled and maintained all health and safety related procedures and documents.
• Controlled and verified the appropriateness and effectiveness of the safety equipment, facilities, training and safety measures for Health, Safety and Environment related matters.
• Notified the senior site staff to rectify unsafe activities or work conditions and prohibited the use of the facilities until compliance is confirmed.
• Established and managed the incident investigation team when an incident occurred.
• Performed investigation about incidents and near-misses and disseminated information for preventive measures.
• Audited existing HSE plan to secure effectiveness and accurateness.
• Ensured that all staff received adequate induction training and information with regards to health and safety aspects of their work prior to commencement of their duties.
• Established, maintained, distributed and updated the HSE management documentation.
• Conducted internal audits to control the operation of the HSE management system.
• Administered non-conformities and corrective actions.
• Attended client safety committee meetings.

Company industry:
Civil Engineering
Job role:
Safety

Safety Advisor

June 2004 - January 2006

SAUDI ARAMCO - ISO Pentene Gas Recovery of Blending Project

Yanbu, Saudi Arabia

June 2004 - January 2006

• Report directly to HSE Director.
• Set an example and be a Model in implementation of Company safety awareness and loss prevention program of the company.
• Motivate, promote, encourage & train the employees (through Safety Slogans, & Best Safety Award for the month) to increase the safety awareness at all levels.
• Inspection of the work site daily for any unsafe acts or conditions and initiate for the corrective action.
• Carry out job site surveys daily to see that only safe work methods are in operation that health and safety requirements are being observed, welfare & first aid facilities are adequate and properly maintained.
• Make a weakly & monthly inspection of PPE, Hand Tools & Power Tools etc and keep a record.
• Monthly Check up of Fire Fighting Equipment and to ensure that it is filled and in good running condition.
• Investigate and document health, safety & environmental related incidents/accidents.
• Determine the cause of any accident/incident (or dangerous occurrence), and recommend preventing recurrences of such an incident.
• Perform monthly & weakly safety meeting and keep a record of safety meeting at job site with complete subject discussed and a list of attendees.
• Keep a permanent record of all injuries, fires, motor vehicles accident, Property damage, and Crane/ heavy equipment accidents which have occurred at the site.
• To provide the knowledge of safe work procedure according to ANSI, OSHA, BRITISH, GULF & other equivalent Safety Standards as per the job requirement.
• Maintain a register of chemical materials used at the premises (Materials Safety Data Sheets) & advice to the management on their safe handling

Company industry:
Oil & Gas
Job role:
Safety

Safety Representative

May 2003 - May 2004

Saudi Iron and Steel Company (HADEED)

Jubail, Saudi Arabia

May 2003 - May 2004

• To report directly to HSE Director.
• Planning, implementing & monitoring Company Health, Safety & Environmental Policy & Procedures by conducting site inspections & audit for the effectiveness.
• Carry out Job Safety Analysis and educating employees about the Job Safety Analysis.
• Conducting HSE Induction Training for all new employees.
• Providing training in respect of manual handling, equipments & pedestrians movement (Traffic Management), stacking materials etc.
• Inspection of all machineries with help of maintenance department/Workshop Supervisor, Foreman.
• Being presence while Site Foreman/Supervisor conducting toolbox talks & advising on safety matters.
• Motivate, promote, encourage & train the employees (through Safety Slogans, & Best Safety Award for the month) to increase the safety awareness at all levels.
• Inspection of the work site daily for any unsafe acts or conditions and initiate for the corrective action.
• Carry out job site surveys daily to see that only safe work methods are in operation that health and safety requirements are being observed, welfare & first aid facilities are adequate and properly maintained.
• Make a weakly & monthly inspection of PPE, Hand Tools & Power Tools etc and keep a record.
• Monthly Check up of Fire Fighting Equipment (Fire Extinguisher, Hose reels & Fire hydrant etc.) and to ensure that it is filled and in good running condition.
• Investigate and document health, safety & environmental related incidents/accidents.
• Determine the cause of any accident/incident (or dangerous occurrence), and recommend preventing recurrences of such an incident.
• Perform monthly & weakly safety meeting and keep a record of safety meeting at job site with complete subject discussed and a list of attendees.
• Keep a permanent record of all injuries, fires, motor vehicles accident (MVAs) Property damage, and Crane/ heavy equipment accidents which have occurred at the site.
• To provide the knowledge of safe work procedure according to ANSI, OSHA, BRITISH, GULF & other equivalent Safety Standards as per the job requirement

Company industry:
Industrial Production
Job role:
Safety

Safety Advisor

July 1999 - April 2003

SAUDI ARAMCO

Jeddah, Saudi Arabia

July 1999 - April 2003

• Report directly to HSE Director.
• Carry out continuous Project sites inspections to ensure that only safe working methods are applied and that Health & Safety rules are being observed and make proper recording of such inspections for corrective action.
• Guide to all Work Permit Receivers in order to get work permit for the required job.
• Inspect all safety tools, appliances, equipment’s and ensure that they are adequately and properly maintained.
• Inspect the fire extinguishers expiry date and that it is deployed in easily accessible locations in line with project safety requirements.
• Inspect jointly with competent person all newly installed scaffolds and ensure they are safe and properly tagged.
• Carry out inspections jointly with competent person on erected scaffolding, install green tags on approved scaffolds, and carry out weekly inspections.
• Ensure that good housekeeping is maintained throughout the period of work in accordance with requirement of Health & Safety Plan.
• Regular inspection of lifting tackles and tools to ensure compliance of color coding scheme, and removal from the site of defective ones.
• Regular inspection in project site construction area to ensure provision of First Aid kits available and readily to use in case of need arises.
• Coordinating with subcontractor’s safety inspectors to ensure implementation of H&S procedures and promoting awareness

Company industry:
Oil & Gas
Job role:
Safety

Safety Inspector

May 1997 - June 1999

Saudi Arabia Basic Industries Corporation (SABIC)

Yanbu, Saudi Arabia

May 1997 - June 1999

• To assist the Sr. Safety Engineer and set an example and be a Model in implementation of Company safety awareness and loss prevention program of the company.
• Motivate, promote, encourage & train the employees (through Safety Slogans, & Best Safety Award for the month) to increase the safety awareness at all levels.
• Inspection of the work site daily for any unsafe acts or conditions and initiate for the corrective action.
• Carry out job site surveys daily to see that only safe work methods are in operation that health and safety requirements are being observed, welfare & first aid facilities are adequate and properly maintained.
• Make a weakly & monthly inspection of PPE, Hand Tools & Power Tools etc and keep a record.
• Monthly Check up of Fire Fighting Equipment and to ensure that it is filled and in good running condition.
• Investigate and document health, safety & environmental related incidents/accidents.
• Determine the cause of any accident/incident (or dangerous occurrence), and recommend preventing recurrences of such an incident.
• Perform monthly & weakly safety meeting and keep a record of safety meeting @ job site with complete subject discussed and a list of attendees.
• Keep a permanent record of all injuries, fires, motor vehicles accident (MVAs) Property damage, and Crane/ heavy equipment accidents which have occurred @ the site.
• To provide the knowledge of safe work procedure according to ANSI, OSHA, BRITISH, GULF & other equivalent Safety Standards as per the job requirement.

Company industry:
Petrochemicals & Refined Petroleum Products Manufacture
Job role:
Safety

Education

VINAYAKA MISSIONS UNIVERSITY

December 2010

December 2010

Diploma, DIPLOMA IN FIRE SAFETY

India

GPA (percentage): 66%

GPA (percentage): 66%

INDIAN INSTITUTE OF SAFETY TECHNOLOGY

July 2006

July 2006

Diploma, DIPLOMA IN INDUSTRIAL SAFETY

India

GPA (percentage): 50.66%

GPA (percentage): 50.66%

ALLAHABAD AGRICULTURAL INSTITUTE DEEMED UNIVERSITY

August 2005

August 2005

Bachelor's degree, Bachelor of Science in Information Technology

India

GPA (percentage): 78.56%

GPA (percentage): 78.56%

Skills

Working Abroad
Expert
Working Abroad
Expert
Rigging
Expert
Rigging
Expert
OHSAS 18001
Expert
OHSAS 18001
Expert
ISO 14001
Expert
ISO 14001
Expert
Project Supervision
Expert
Project Supervision
Expert
DIPLOMA IN COMPUTER APPLICATION
Expert
DIPLOMA IN COMPUTER APPLICATION
Expert
Working Abroad
Expert
Working Abroad
Expert
Rigging
Expert
Rigging
Expert
OHSAS 18001
Expert
OHSAS 18001
Expert
ISO 14001
Expert
ISO 14001
Expert
Project Supervision
Expert
Project Supervision
Expert

Languages

English

Expert

Hindi

Expert

Urdu

Expert

Arabic

Intermediate

Training and Certifications

Certifications
SCAFFOLDING INSPECTOR (SAUDI ARAMCO CERTIFIED)
May 2005 - May 2008
CONFINED SPACE ENTRY SUPERVISOR
Mar 2013 - Mar 2015
BASIC FIRST AID
Dec 2006 - Dec 2008
SAUDI ARAMCO WORK PERMIT
Jul 1999 - Jul 2001
SAUDI ARAMCO WORK PERMIT CERTIFICATE
Apr 2005 - Apr 2007
NEBOSH International General Certificate in Occupational Health and Safety
Feb 2011
Approved Safety Officer by U.A.E. Ministry of Labour
Mar 2010 - Mar 2011
SAUDI ARAMCO WORK PERMIT
Mar 2003 - Mar 2006
SCAFFOLDING SUPERVISOR LEVEL 1 (SAUDI ARAMCO CERTIFIED)
Mar 2005 - Mar 2008
CONFINED SPACE ENTRY SUPERVISOR
May 2015 - May 2017

Training
OHSAS 18001:2007 OCCUPATIONAL HEALTH & SAFETY MANAGEMENT SYSTEM TWO DAYS INTERNAL AUDITOR TRAINING
Lloyd's Register
Feb 2010
ENVIRONMENTAL MANAGEMENT AWARENESS
DOHA INDUSTRIAL SAFETY SERVICES (DISS)
Jun 2015
BASIC FIRST AID
Team Safety Consultants Dubai, U.A.E.
Mar 2010
BASIC RIGGING & SLINGING
Safety Marine Services Group of Companies, U.K U.A.E. Registered
Jan 2008
ISO 14001:2004 ENVIRONMENTAL MANAGEMENT SYSTEM TWO DAYS INTERNAL AUDITOR TRAINING COURSE
Lloyd's Register
Mar 2010

Hobbies and interests

YOGA, READING & ENTERTAINMENT