Chief Material Engineer
Ess I Aar consultants
Total years of experience :28 years, 0 Months
CPEC Project was 398 KM & divided into 7-sectios. I performed duties for sec-6, that was 6-lane motorway project length was 60 Km.
Client supervision consultant was SMEC international Co. Controlling to supervision of In-House consultant. Management Construction Team was China State Construction Engineering Company, Managing
In-House consultant, was supervision consultant for Contractor work.
My role was Chief Material Engineer in In-House consultant to manage QA/QC, Geotechnical, ITS Material quality, Agricultural grass & trees Plantation & to fulfill All documentation requirements.
1. Responsibilities to control QA/QC Geotechnical
investigation, material control, Material design from
NSL to final Asphalt pavement, Lane marking, Guard
rail, side slop & grass plantation, service road, safety
fence, plantation of Trees.
Concrete & affiliated work for 150 Structure include
Sutluj Bridge 700 meter long, Culverts, Median drain.
NHA Building work, Toll plaza, service area.
Primavera Daily documentation record online
updating of all quality testing reports to Head Quarter.
2. Management for
laboratories no. 4,
batching plant no. 6,
pugmill no. 3 for Sub-base & aggregate base coarse,
Asphalt Plant no. 2
Paver Plant no. 2
ITS work for Electrical cabling & material Testing.
Gabion work of 200, 000 cubic meter for sutluj bridge
work,
I Performed duties as QA/QC manager from Client. Responsibility to manage different projects in various locations of Muzaffargarh Region.
My responsibility was to Manage the Material Quality, Work Quality & Required documentation.
1. Highway road construction
2. NSL, NGC, Earthwork, Sub Base, Aggregate Base
Coarse, WBM, Asphalt Base Coarse, Asphalt
Wearing Coarse, Culverts, Buildings, Etc
3. Managing all works with Marshal Mix design, SBS
bitumen with Marshal mix Design, Concrete Mix
Design,
4. Quality management & online documentation with
daily reporting of quality Testing & record.
Safe Mix Concrete Products Limited is commercial concrete manufacture for various strength for construction companies.
I Performed duties for company as QA/QC for the concrete production & client management.
Concerning to fulfill requirement of contractors quality requirement with their client in all respects.
1. Concrete Batching Plant Quality control.
2. Concrete Mix design from lean to Ultra High strength
3. Various combinations of natural pozzolan and silica fume were used to produce workable high to very high strength mortars and concretes with a compressive strength in the range of 69-110 MPa. The mixtures were tested for work-ability, density, compressive strength, splitting tensile strength, and modulus of elasticity. The results of this study suggest that certain natural pozzolan-silica fume combinations can improve the compressive and splitting tensile strengths, workability, and elastic modulus of concretes, more than natural pozzolan and silica fume alone
4. Ultra-High Performance Fibre Reinforced Concrete (UHPFRC).
5. Aggregate, Sand, cement control for quality testing.
Managing Plant performance, Clients requirements & guidance.
Research for further development in concrete mix for future requirements.
Saudi Consulting Services is leading consultant company of Saudi Arabia.
I worked with this company QA/QC, Material Engineer, Geotechnical Engineer on different projects in different regions of Saudi Arabia such as Abha region, Khamis Mashit & Riyadh areas with Baldia as well as MOT projects in Buildings & highway projects.
Manage QA/QC, Geotechnical, & to fulfill All documentation requirements.
1. Responsibilities to control QA/QC Geotechnical investigation, material control, Material design from NSL to final Asphalt pavement, Lane marking, side slop & service road.
Concrete & affiliated work, Bridge, Culverts, Median drain.
Using Primavera, Daily documentation record online updating of all quality testing reports to Head office
2. Management for
laboratories
batching plant
Sub-base & aggregate base coarse,
Asphalt Plant
Paver Plant
Electrical cabling & material Testing.
Husnain Cotex is Leading Highway construction Contractor Company of Pakistan
I worked with this company QA/QC, Material Engineer, Geotechnical Engineer on different projects in different regions of Pakistan for Buildings & highway projects.
Manage QA/QC, Geotechnical, & to fulfill All documentation requirements.
1. Responsibilities to control QA/QC Geotechnical investigation, material control, Material design from NSL to final Asphalt pavement, Lane marking, side slop & service road.
Concrete & affiliated work, Bridge, Culverts, Median drain.
Daily documentation record online updating of all quality testing reports to Head office
2. Management for
laboratories
batching plant
Sub-base & aggregate base coarse,
Asphalt Plant
Paver Plant
More than 22 years multinational experience in Assessment, Evaluation and implementation of Quality Assurance/Control Management System, Geotechnical Investigation, data acquisition, its interpretation and evaluation for further application of acquired knowledge, precedent and judgment based upon new and old standard procedures. Geotechnical Investigation. Testing of materials for soil, Asphalt, concrete both at laboratory and field, in relation to civil construction of public and private assets such as highways, bridges and other Structures, Dams, high-rise buildings, Air field and towns.