محمد مبين Mubeen, Sr. Electrical and Automation Engineer

محمد مبين Mubeen

Sr. Electrical and Automation Engineer

Suido Kiko Middle East

البلد
المملكة العربية السعودية
التعليم
بكالوريوس, Electronics & Instrumentation
الخبرات
15 years, 8 أشهر

مشاركة سيرتي الذاتية

حظر المستخدم


الخبرة العملية

مجموع سنوات الخبرة :15 years, 8 أشهر

Sr. Electrical and Automation Engineer في Suido Kiko Middle East
  • المملكة العربية السعودية - جدة
  • أشغل هذه الوظيفة منذ نوفمبر 2011

- Supervise and manage a team of junior engineers and draftsman to ensure the output meets the project requirements and schedule without compromise in the quality.

- Support proposal team during proposal stage which includes preliminary design, estimated cost.

- Review P&ID and provide corrections (if any) to process engineer.

- Prepare technical documents and drawings for approval related to Automation System (PLC, HMI, SCADA), Automation Architecture, PLC I/O List, Panel Design, Power and Control Cable Schedule, Power Cable Sizing, Cable Route, Cable Tray, Instruments Specifications, Instruments Hook-Up Drawings, MCC Design in accordance with project specifications and schedule.

- Meeting with the client/consultant for any clarifications to get the work approved.

- Provide support to the construction team to execute the job at the site as per the design.

- Witness and perform FAT (Factory Acceptance Test) for panels.

- Witness and perform SAT (Site Acceptance Test) for the panels.

- Program PLC using Ladder Logic and Function Blocks as per Control Philosophy.

- Design SCADA and HMI as per the Process and Project Specifications.

- Configure and calibrate field instruments.

- Perform loop test for the automation system.

- Perform dry test, pre-commissioning for the project.

- Perform wet test, commissioning for the project.

- Provide support for Operation and Maintenance.

ACHIEVEMENTS:
Some of the major projects executed are listed below:

- Sewage Treatment Projects:

i) Conventional waste water treatment plant at Jeddah industrial City with a capacity of 50, 000 CMD

ii) Membrane Bio Reactor (MBR) waste water treatment plant with a capacity of 30, 000 cmd at al asla valley (North Jeddah).

iii) Industrial waste water treatment plant at Sudair industrial city with a capacity of 10, 000 CMD.

iv) Industrial waste water treatment plant at Dammam industrial city - 3 with a capacity of 10, 000 CMD.



v) Membrane Bio Reactor (MBR) waste water treatment plant at KFSH, Riyadh with a capacity of 8000 CMD.


- Combined Projects for Sewage Treatment and Reverse Osmosis
i) Membrane Bio Reactor (MBR) Sewage Treatment Plant with a capacity of 10, 000 CMD and treating the effluent with Reverse Osmosis with a capacity of 5000 CMD in coordination with Japanese counterparts CHIYODA and KOBELCO assigned by the Japanese Government.


- Reverse Osmosis Projects:
i) Sea Water Reverse Osmosis (SWRO) with a capacity of 15, 000 CMD supplying water to Jeddah City

ii) Sea Water Reverse Osmosis (SWRO) with a capacity of 2500 CMD supplying water to Pepsi Cola Factory in Jeddah

iii) Brackish Water Reverse Osmosis (BWRO) 50, 000 CMD supplying clean water to Riyadh City at Salboukh.

iv) Brackish Water Reverse Osmosis (BWRO) 50, 000 CMD supplying clean water to Al Kharj City.

v) Sea Water Reverse Osmosis (SWRO) with a capacity of 1000 CMD supplying water to Head Quarters Business Park in Jeddah

Electrical and Automation Engineer في Washnah Water Treatmen
  • يناير 2010 إلى يناير 2011

Scope of Work: * Read the P & ID diagrams for the R.O and S.T.P stations.
* Calculations of electrical loads, cable scheduling (Power and Control).
* Proper equipment selections and preparation of Bill of Materials.
* Design the power diagram & MCC for the station.
* Design the Automation Architecture for the System.
* Design & Program PLC & HMI for the system.
* Perform the commissioning of the station at the final stages.
* Calibration of field transmitters.
* Troubleshoot any problems during the commissioning.
* Automation Platforms used:
- SIEMENS
- MITSUBISHI
- OMRON

Instrumentation Engineer في BIN BUTTI GROUP OF INDUSTRIES
  • الإمارات العربية المتحدة - أبو ظبي
  • يناير 2009 إلى يناير 2010

Scope of Work: * Worked as an Instrumentation Engineer along with Pesco Beams.
* Reading P&I drawings for the plant.
* Calibration of Transmitters control valves and pressure gauges.
* Control Loop Checking and Testing.
* Provide technical assistance in plant commissioning
* Monitor the plant thru Allenbradly PLC and SCADA
* Control and Maintenance.
* Co-ordination with other disciplines and providing necessary Technical support.

Automation Engineer في Metropolitan Water Supply and Sewage Board
  • الهند
  • يناير 2008 إلى يناير 2009

Scope of Work :
* Programming & Troubleshooting of Automation (TRANSMITTERS/CONTROL
VALVES/PLC/SCADA/) and Instrumentation System in the Plant and also at the
other sites of the HMWS & SB

الخلفية التعليمية

بكالوريوس, Electronics & Instrumentation
  • في Osmania University
  • يناير 2008

in

Specialties & Skills

Electrical Design
PLC Programming
Instrumentation
Technical Support
INDUSTRIAL AUTOMATION
CALIBRATION
Waste Water Treatment
Reverse Osmosis
Water Treatment
TESTING AND COMMISSIONING
INSTRUMENTATION DESIGN
PLC PROGRAMMING
Electrical Design
SCADA DESIGN
INSTRUMENTATION AND CONTROL

اللغات

الانجليزية
متمرّس
الهندية
متمرّس
الأوردو
متمرّس