Senior Electrical Engineer
M/s WOOD Group
Total years of experience :13 years, 11 Months
Project - BALEINE II FPSO (Redeployment of Voyager Spirit FPSO)
Company - ENI
Contractor - Altera Infrastructure, Norway
FPSO Voyager spirit is of Sevan design, built in 2008 and as a part of Baliene project it is upgraded for
operation and planned for operational use of next 15 years without major modification.
• KOM with the Client for the project startup and discussion on deliverables.
• 30%, 60%, 90% model review & engineering design review with Client for the EPS2 project.
• MOM with respect to meeting with Client and different mechanical and Electrical package vendors
• Interdisciplinary coordination for IDC close-outs and model design review.
• Preparation of Design basis, Electrical operation philosophy.
• Preparation of the Load list for different operational scenarios and modes of operation.
• Preparing Key SLD for the modification required.
• Preparing Datasheet, TBE for the key packages like 690V Switchgear, UPS, Generator Control panel
and PMS.
• Preparing sizing calculations for Transformers, Cables & UPS.
• Preparation IO list/ ESD/PSD/Load shedding list
• Project responsibility Engineer (PRE) for the below packages, where SPOC between the Client &
Vendor.
690V Switchgear
PMS
Generator Control Panel
HVAC - Electrical
• Giving inputs and guiding in Preparation Equipment layout for substation & Plant areas, Earthing,
Lightning,
• Lighting, Cable tray & Trench Layouts.
Project - FEED for EPS2 Offshore Power distribution Platform & Wellhead towers, Abudhabi
Client - ADNOC, UAE
It has 2 offshore PDPs (ZWSC & ZCSC) and one Gas processing facility (GPF-II), where power is fed from
132kV GIS through 132kV subsea cable. 2 New WHT platforms connecting in existing ring.
• KOM with the Client for the project startup and discussion on deliverables.
• 30%, 60%, 90% model review & engineering design review with Client for the EPS2 project.
• MOM with respect to meeting with Client and offshore site visit report preparation.
• Value engineering and options study for the different power options and cost comparison.
• Interdisciplinary coordination for IDC close-outs and model design review.
• Segregation of deliverables for IFR/IFA/IFD in Lots and status monitoring with respect to the key
deliverable dates.
• Preparation of Design basis for the project and list out all the major items.
• Review the Load list for the project scope and finalize with client.
• Preparing Key SLD that comprise of 132kV GIS, 132/11.5kV Power transformers, 11kV AIS, 11/0.415
transformers,
• Preparing Datasheet & Specification for the key packages like 132 kV GIS, 132kV Power transformers,
Switchgears etc., with respect to ADNOC standards.
• Modification Scope of work for the existing switchgears, ECMS & PMS.
• Adequacy check for the existing Transformer size & availability of feeders in existing switchgears based
on site survey.
• Preparing sizing calculations for Transformers, Cables, NER, UPS
• Preparing ECMS architecture, I/O list.
• Giving inputs and guiding in Preparation Equipment layout for substation & Plant areas, Earthing,
Lightning,
• Lighting, Cable tray & Trench Layouts.
Electrical design and detail engineering for HVDC projects and Offshore windfarm project.
Assistant Consultant (Lead Engineer)
Tata Consultancy Services, Chennai, India.
February 2021 to October 2022
Project - 1.4 gigawatt (GW) Sofia Offshore Wind Farm, Dogger bank ‐ UK
Client - RWE, UK
It has 100 nos of 66kV, 14MW Wind turbines that generates electricity which is transmitted via cables to the
offshore converter platform . The offshore converter platform converts the generated electricity from 66
kilovolts (kV) alternating current (AC) up to 320kV direct current (DC).
TCS scope is to do Design and detail engineering of 11kV & 415V electrical auxiliary systems like AHU’s,
Valve cooling system, Battery chargers, Plant illumination, Control building arrangement at Onshore area.
Preparation of Design Basis report with respect to the KOM.
• Onshore converter station (OCS) Auxiliary single diagram.
• Preparation of Electrical load list for OCS package
Cable engineering package includes Cable specification, Datasheet, Sizing calculation & Technical
quote requisition for the OCS package.
• Preparation of Auxiliary Transformer Datasheet & sizing calculations.
• LV Switchgear & sub distribution cubicles Datasheet.
• OCS & OCP Battery, Battery charger sizing calculation, Datasheet & Technical quote Requisition.
Electrical designs and details engineering for PMC Mabrouk Project.
January 2020 to December 2020
Project - Mabrouk North east development Project, Oman
Client - PDO, Oman
• Preparation of Design Basis report with respect to the KOM with Client & Oman team.
• Preparation of Deliverable list with respect to the KOM with Oman team.
• Transformer package - Preparation of specification, Datasheet, Changes with respect to Design review
meeting with Client, Technical bid evaluation, BCM with Bidders, Price sheet preparation.
• 33kV PMR package - Preparation of Datasheet, Technical bid evaluation, BCM with Bidders, Price
sheet preparation.
• Cables Package - Preparation of specification, Datasheet, Technical bid evaluation, BCM with Bidders,
Price sheet preparation, HV & LV cable sizing calculation.
• LV Switchgear Package - Preparation of specification, Datasheet, Changes with respect to Design
review meeting with Client, Technical bid evaluation, BCM with Bidders,
Project - 6 x330 MW PP13/14 Combined Cycle Power Plant, Saudi Arabia.
Client - Saudi Electricity Company (SEC), Saudi Arabia.
Cable routing & Conduit allocation, filling details for the Power Plant through Cable Management software PCCKS.
Review and updating SLD.
LV & MV Control Wiring Drawings.
Checking in Naviswork of electrical items such cable trench, cable tray & Conduit details.
Project - 6 x330 MW PP13/14 Combined Cycle Power Plant, Saudi Arabia.
Client - Saudi Electricity Company (SEC), Saudi Arabia.
Cable routing & Conduit allocation, filling details for the Power Plant through Cable Management software PCCKS.
Deputed in PP13 KSA site to solve the Technical Queries in Cable routing and conduit/tray fill.
LV & MV Control Wiring Drawings.
Checking in Naviswork of electrical items such cable trench, cable tray & Conduit details.
Project - Detail Engineering for BPC Steam Supply - Cherry Project, Malaysia.
Client - BASF Petronas Chemicals SDN BHD, Malaysia.
Preparation of Electrical Consumer list and load list for BOP & BTG package.
Preparation of Auxiliary Transformer sizing calculation.
33kV & 11kV Cable sizing for GSUT and Auxiliary Transformers.
Preparation of lighting DB schedule, lighting calculation on Dialux software.
Preparation of Sub Contractor Specification for Modification of 33kV feeder & Termination of 33kV cable.
Preparation of Specification and Data sheet for NGR.
Preparation of Cable Data sheet.
Project - AEP - Rockport Unit 2 SCR Retrofit Project
Client - American Electric Power
Preparation of Electrical Equipment List & Load list.
Checking the Ampacity calculation for the Transformers to withstand the additional loads.
Checking the Ampacity calculation for the additional loads.
Preparation of UPS sizing calculation for the additional loads.
Preparation of PDC Enclosure specification.
Preparation of LV MCC Datasheet.
Preparation of Lighting calculation and report in AGI32 Software.
Preparation of Lightning Protection calculation using Rolling sphere method.
Checking the Cable tray layout, Filed wiring Diagram, Power panel wiring.
Prepared Load flow, Short circuit & Motor starting calculation for additional loads added in UNIT 2 SCR in EasyPower software.
Project - 350MW KPONE Independent Power Plant, Ghana.
Client - Cenpower Generation Limited, Ghana.
Review and updating SLD.
Reviewing of Electrical Building Layout.
Lightning Protection Calculation using Rolling sphere method.
Lighting Fixture schedule, Lighting Design through AGI32 software & preparation of lighting layouts.
Cable Tray & conduit layout preparation.
3D modelling review on SPR of electrical items such cable trench, cable tray & Conduit details.
Project - 2 x336 MW Salem Harbour combined cycle power plant, USA.
Client - Iberdrola, USA.
Lightning Protection Calculation using Rolling sphere method.
Lighting Fixture schedule, Lighting Design through AGI32 software & preparation of lighting layouts.
3D modelling review on SPR of electrical items such cable trench, cable tray & Conduit details.
Project - Rabab Harweel Integration Project, Oman.
Client - Petroleum Development Oman.
Reviewing and updating SLD, Preparing Data sheets & load list.
Assisted in Cable sizing, Preparing Load schedule, Cable schedule, Design calculation for Transformers.
Giving inputs and guiding in Preparing Equipment layout for Plant areas, Earthing, Lighting, Cable tray sizing & Trench Layouts.
Preparing MTO for Earthing, Lighting & Power.
Project - Yamama Formation Development FEED West Qurna 2 Project, Iraq.
FEED Engineering, Preparation of SLD for HV & LV system starting from Main switchboard to small power distribution board.
Preparing Specifications, Load schedule, Cable Schedule, Data sheets, Design calculation for Transformers, Switchgears, cable sizing, Battery sizing, DG, .
Giving inputs and guiding in Preparing Equipment layout for substation & Plant areas, Lighting & Cable tray & Trench Layouts.
Project - Petroleum Regeneration & Processing Faciity, Fujariah (U.A.E)
Prepare technical specification & Data sheet for various Electrical Equipments but not limited to
Power genneration sets, Transformers, LV Bus Duct, LV & MV Switchgear, AC & DC UPS @
Distribution Boards.
Prepare Electrical Load List, Key SLD & single line diagram for MV & LV.
Perform sizing calculations for cables, transformers, generator & APFC Capacitor banks.
Perform Load flow & Short circuit analysis in ETAP 12.6 to ensure adequacy of switchgear, cables &
all electrical equipment in accordance with IEC standards.
Prepare Hazardous area classification drawing as per API 505.
Giving inputs and guiding in Preparing Equipment layout for substation & Plant areas, Earthing,
Lighting & Cable tray & Trench Layouts.
Project - 1.83 MTPA Iron ore Beneficiation Plant, Donimalai.
Detailed Design engineering activities based on FEED review/evaluation.
Key SLD for MV/LV system starting from Clients source (HV) to tailing end distribution boards.
Reviewing specifications & Preparation of Data sheets, load schedule, Lcs schedule, DB Schedule,
Cable schedule, Calculations, Purchase requisition for Transformers, Switchgears, Cables, Cable
trays, Battery & Battery charger, Lighting, Lightning, Earthing, DG.
Giving inputs and guiding in Preparation Equipment layout for substation & Plant areas, Earthing,
Lightning, Lighting, Cable tray & Trench Layouts.
Vendor quotation review and Technical follow-up for all Electrical Equipment’s, Technical Clarification
and Technical Bid evaluation.
MOM with Clients/Consultants and vendors, Planning & Monitoring electrical activities as a Lead
Engineer.
Co-ordination with other departments for project activities and reviewing the drawings/documents.
Project - GSFL-Revamping of Phosphoric Acid Plant, Paradeep.
Detailed Design engineering activities based on FEED review/evaluation.
Basic engineering for developing designs and documentation for construction.
Key SLD for MV/LV system starting from Clients source (HV) to tailing end distribution boards.
Preparing Data sheets, load schedule, Lcs schedule, DB Schedule, Calculations & Purchase
requisition for Transformers, Switchgears, Cables, Cable trays, Battery & Battery charger, Lighting,
Lightning, Earthing, UPS.
Giving inputs and guiding in Preparation of Equipment layout for substation & Plant areas, Earthing,
Lighting, Cable tray & Trench Layouts.
Vendor quotation review and Technical follow-up for all Electrical Equipment’s, Technical Clarification
and Technical Bid evaluation.
MOM with Clients/Consultants and vendors, Assisting to the Lead Engineers for Planning, Monitoring
in Engineering Activities.
Co-ordination with other departments for project activities and reviewing the drawings/documents.
Project - 30MLD Desalination plant, Jaipur.
upporting in Preparation of Equipment layout for substation & Plant areas, Earthing, Lighting, Cable
tray & Trench Layouts.
Vendor quotation review and Technical follow-up for all Electrical Equipment’s, Technical Clarification
and Technical Bid evaluation.
Project - 1.4 MTPA Alumina Refinery - Milk of Lime, Vishakapattinam.
Preparing Data sheets, Calculations & Purchase requisition for Transformers, Switchgears, Cables,
Cable trays, Battery & Battery charger, Lighting, Earthing, DG.
Supporting in Preparation of Equipment layout for substation & Plant areas, Cable tray & Trench
Layouts.
Vendor quotation review and Technical follow-up for all Electrical Equipment’s, Technical Clarification
and Technical Bid evaluation.
Proposals - Western Cluster, Iron Ore Beneficiation plant Package, Liberia.
Basic Design Engineering Activities based on Tender input & Preparation of SLD, Design Basis,
Preliminary Layouts.
Preparation of Itemized & Bulk MTO.
Getting quotation from the vendors and technical Bid evaluation.
Proposals - 1300 TPD Lime & Dolomite calcination plant, Nagarnar.
Basic Design Engineering Activities based on Tender input & Preparation of SLD, Design Basis,
Preliminary Layouts.
Preparation of Itemized & Bulk MTO.
Getting quotation from the vendors and technical Bid evaluation.
Proposals - 1250TPD Oxygen plant, Nagarnar.
Basic Design Engineering Activities based on Tender input & Preparation of SLD, Design Basis,
Preliminary Layouts.
Preparation of Itemized & Bulk MTO
Site Engineering activities includes Design, Material handling & Man power planning.
Preparation & Overview of Power Distribution Scheme.Panel sizing, load schedule, Preparation of DB schedule.Earthing, Lighting & Equipment layout for buildings.
Industrial Visits to substation
Recieved cerifications in Sports and Debate