الحد الأقصى لحجم ملف التحميل: 3MB أنواع الملفات المسموح بها: jpg, jpeg, gif فقط

اضغط على زر البحث، قم باختيار صورة معينة، ثم اضغط على حفظ الصورة
المبادئ التوجيهية
  1. قم بتحميل صورة لنفسك فقط.
  2. سيتم رفض صور الأطفال أو المشاهير أو الحيوانات أو صور الشخصيات الكرتونية.
  3. سيتم رفض الصور التي تحتوي على عري أو الصور العنيفة وقد تؤدي تلك الصور إلى إلغاء حسابك الخاص.
  4. سيتم رفض صورة جواز السفر أو صورة عن بطاقة الهوية أو تلك التي تحتوي على أي معلومات شخصية مثل عنوانك ورقم جواز السفر، أو أرقام الاتصال الخاصة بك وذلك من أجل أمنك الشخصي.

حذف المبادئ التوجيهية

Mohd Nazir Khamis

Welding Inspector / General Inspector

البلد:
ماليزيا
التعليم:
الثانوية العامة أو ما يعادلها, Certificate Welding
الخبرة:
17 سنة, 4 أشهر

الخبرة العملية

ما هي خبرتك المهنية؟ في الواقع، إن الخبرة المهنية هي من أهم أقسام سيرتك الذاتية.
يمكنك ذكر كافة مهاراتك والمسؤوليات، والمشاريع والإنجازات التي قمت بها في كل دور وظيفي. إن كنت قد تخرجت مؤخراً، يمكنك إضافة الأعمال التطوعية أو فترات التدريب التي قمت بها.
إضافة الخبرة

مجموع سنوات الخبرة:  17 سنوات, 4 أشهر   

يناير 2014 إلى فبراير 2016

Welding Inspector / General Inspector

في Petronnic SDN BHD
البلد : ماليزيا
Representative Petronas Carigali Sdn Bhd
يونيو 2013 إلى يوليو 2013

MOC PIPELINE INSPECTOR (PIPELINE & PRE- COMMISSIONING) CONTRACT

في VELOSI (M) SDN BHD
البلد : ماليزيا
Representative MURPHY OIL CO LTD. Position : MOC PIPELINE INSPECTOR ▪ 04/07/2013 - 31/07/2013 DP DSV Toisa Paladin Location : Bintulu Sarawak Area, Malaysia Task : Integrated Transportation & Installation of offshore facilities (Contract No: MURPHY / P8281) Pre commissioning and Hydro testing, Tie in Subsea Spool & Riser installation a) 8"-inch dia. SA-PA to S.PLEM (Multiphase Oil Pipeline) *8-inch sub-sea tie in spool @ SA-PA *8-inch sub-sea tie in spool @ S.PLEM b) 10"-inch dia. PR-PA to SA-PA (Multiphase Oil Pipeline) *10-inch sub-sea tie in spool @ PR-PA *10-inch sub-sea tie in spool @ SA-PA c) 16"-inch dia. SA-PA to SE-PA (Dry Gas Pipeline) *16-inch sub-sea tie in spool @ SA-PA *16-inch sub-sea tie in spool @ SE-PA *16-inch Riser @ SE-PA *Riser Guard @ SE-PA *Riser Clamp (1 no. Load bearing Clamp + 3 nos. Sliding Clamp) @ SE-PA d) 16"x 8km Pipeline installation SN-PA to BE-SA (Multiphase Gas Pipeline) *16-inch sub-sea tie in spool @ BE-SA *16-inch sub-sea tie in spool @ SN-PA ▪ 09/06/2013 - 04/07/2013 QP 2000 ( BARGE ) Location : Bintulu Sarawak Area, Malaysia Project : Integrated Transportation & Installation of offshore facilities (Contract No: MURPHY / P8281) NDT PROCESS : AUT Task’s:- a) 8"x 17km Pipeline installation SAPA to S.PLEM (Multiphase Oil Pipeline) b) 10"x 40km Pipeline installation PRPA to SAPA (Multiphase Oil Pipeline) c) 16"x 15.3km Pipeline installation SAPA to SEPA (Dry Gas Pipeline) d) 16"x 8km Pipeline installation SNPA to BESA (Multiphase Gas Pipeline)
مارس 2013 إلى أبريل 2013

GENERAL INSPECTOR (PIPING, MECHANICAL & PIPELINE) CONTRACT

في VELOSI (M) SDN BHD
البلد : ماليزيا
Representative Carigali Hess Operating Co. Sdn Bhd Position : Acting Snr. General Inspector ▪ 01/03/2013 - 27/04/2013 DLB KUROSHIO 1 ( BARGE ) Location : Block A-18 of Malaysia -Thai Joint Development Area (MTJDA) Task : Develop New Platforms, Namely Bulan-B (BLB) along with the associated pipelines a) 16" Pipeline installation BLA-BLB b) BLB Jacket Installation c) BLB 16" Riser Installation d) CKC-CKD PL Free Span Correction e) Concrete Mattresses installation f) BLA 16" Riser Installation g) As-built Survey by K1 h) BLB Topside Installation i) 16" Pipeline Pre-Commissioning
يوليو 2006 إلى ديسمبر 2012

WELDING INSPECTOR / GENERAL INSPECTOR ( CONTRACT )

في EP ENGINEERING SDN BHD
البلد : ماليزيا
Representative Petronas Carigali Sdn Bhd

Main Additional Accountabilities and Responsibilities @ PCSB / CHESS :

• Monitor the preparatory works prior to commencement of
work i.e. fill up the pipe tunnel, functional test of the
equipments and etc.
• effectiveness and in compliance to HSE and Quality
requirements.
• Ensure that work is carried out in accordance with the
Contract and specifications
• Monitor movement of the personnel, equipments,
barge/vessel spread.
• Participate in the implementation of HSE plan i.e. pre job
briefing, safety walkabout, hygiene inspection, drill, safety
campaign and etc.
• Implement and follow-up action in accordance with the
PETRONAS and PCSB’S HSE policies, procedures and
requirements.
• Monitor the marine spread activities i.e. anchor handling
operation, personnel/equipments transfer, mooring of
material barges.
• Verify and close out of the punch list of the project scope of
works in compliance to the contract and prior to issuance of
Notice of Provisional Acceptance
• Ensure safety standards and requirements and observed
bring policy matters to attention of superiors.
• Witness the calibration and testing of project equipment and
verify validity of the calibration and testing record.
• Monitor and verify the pre and post-installation surveys of all
structures to be installed by the Contractor is in accordance
with company requirement and specifications.
• Monitor and verify that all new structures position are within
tolerance as specified in Company’s standard.
• Ensure and verify the function ability and operability of the
barge positioning systems as outlined in Contract
requirements and Company’s specifications.
• Monitor, verify and in close liaison with Marine Captains,
Field Engineer, Surveyor, Barge Foreman, Tower operator
and AHT’s Master during anchor handling operations or
during
• Lifting Inspection and monitoring activities to ensure all
condition as good and meet requirement.
• ROV subsea monitoring performing underwater survey on
good condition.
• Monitoring and ensure all divers perform our duty as follow
by PTS and underwater work spec. IMCA
• Monitor and perform inspection Air diving equipment on mob
and before perform diving activities
• Visual inspection and visual checking SAT diver Chamber
before compress diver and SAT BELL for the diving activities
يناير 2005 إلى ديسمبر 2005

WELDING INSPECTOR ( CONTRACT )

في CITO PETROLEUM (M) SDN BHD
البلد : ماليزيا
Representative Petronas Carigali Sdn Bhd

• January 2005
BAKP-B BARAM SOUTH DEVELOPMENT FABRICATION
Location : SDE Teluk Ramunia, Johor Malaysia
Task : Production Platform BAKP- Jacket & Interconnecting Bridge

• October 2005
BAKP - B BARAM SOUTH DEVELOPMENT
Location : Brook loyard, Kuching Sarawak, Malaysia
Task : Fabrication Of Baram MSF, M2, M3 & Flare Boom
أغسطس 2004 إلى نوفمبر 2004

SERVEYOR ( CONTRACT )

في BUREAU VERITAS (M) SDN BHD
البلد : ماليزيا
SERVEYOR ( CONTRACT )

 Project Kuala Lumpur Convention Centre Hall ( Aluminum
Truss ), Fabrication at Preserver Engineering Sdn Bhd Klang
Workshop Selangor.

 Project Shin Eversendai Engineering (M) Sdn Bhd ( PQR &
WQT for Project 3x700MW Coal Fired Power Plant, Tanjung Bin
at Rawang Workshop, Selangor.
مارس 2004 إلى أغسطس 2004

WELDING INSPECTOR CONSULTONT ( CONTRACT )

في CPG LABORATORIES PTE LTD
البلد : سنغافورة
Representative

• Project Changi Airport Terminal 3, Fabrication at Zeleco Engineering Sdn Bhd Rawang Workshop Selangor, Malaysia.
أبريل 2003 إلى ديسمبر 2003

WELDING INSPECTOR ( CONTRACT )

في CARIMIN SDN BHD
البلد : ماليزيا
Representative Petronas Carigali Sdn Bhd

 Project DLB KUROSHIO 2 OFFSHORE Installation Pipeline 6” OD, 10”OD and Riser Angsi Pipeline.

 Project SEA HORIZON OFFSHORE Transportation Installation and Pipe laying for North Lukut & Penara Drilling Platform and Pipeline Installation.

 Project SETIA ABADI OFFSHORE PRE COMMISSIONING 30” OD Expansion Offset Tie-in @ M1DR-A and Pre Commissioning 30”OD x 155.545km E11R-C To M1DRA-A
سبتمبر 2002 إلى مارس 2003

WELDING INSPECTOR ( CONTRACT )

في VELOSI SDN BHD MIRI SARAWAK
البلد : ماليزيا
Representative Sarawak Shell Sdn Bhd

 Project Well Tie-in Activity at SFJT-B Complex

 Project Test Separator Modification at E11 Complex

 Project Maintenance activity at F23 Complex

 Project Transportation and installation of Offshore Facility for 2004-2003 24”OD Riser, M1DRA and JINTAN-A Pipeline, at Teluk Romania Workshop, Johor Bahru
أكتوبر 2001 إلى يوليو 2002

QA / QC INSPECTOR ( CONTRACT )

في MWCT PETRO CHEM (M) SDN BHD
البلد : ماليزيا
 Project Hartasuma Sdn Bhd Gelugor Combined Cycle Conversion at Gelugor Power Station, Pulau Pinang.
يوليو 2001 إلى سبتمبر 2001

QA / QC INSPECTOR ( CONTRACT )

في MPL ENGINEERING SDN BHD
البلد : ماليزيا
 Project Ionic Enersave Sdn Bhd Centralized Utility Facilities piping Kerteh Terengganu at MPL Workshop Shah Alam Selangor.

 Project Ionic Enersave Sdn Bhd Manjung 3x750MW Coal Fired Power Station Waste Water Treatment Plant at MPL Workshop Shah Alam Selangor.
ديسمبر 2000 إلى يونيو 2001

QA / QC INSPECTOR PIPING ( CONTRACT )

في APECO ENGINEERING SDN BHD
البلد : ماليزيا
 Project Protek Engineering Sdn Bhd KHTP Independent Power Utility HRSG Boiler Installation Kulim Kedah.
سبتمبر 2000 إلى نوفمبر 2000

SAFETY OFFICER ( CONTRACT )

في PINEWELL MATRIC SDN BHD
البلد : ماليزيا
• Project ABB ETSI Sdn Bhd Maintenance activity at Tenaga Nasional Sdn Bhd Kapar Klang, Selangor.
مارس 1999 إلى سبتمبر 1999

QC INSPECTOR PIPING ( CONTRACT )

في EQUATOR ENGINEERING SDN BHD
البلد : ماليزيا
 Project TEC Engineering Sdn Bhd KVCM Kerteh Terengganu.
نوفمبر 1998 إلى مارس 1999

ASST. QC INSPECTOR PIPING ( CONTRACT )

في EQUATOR ENGINEERING SDN BHD
البلد : ماليزيا
 Project MHI Engineering Sdn Bhd Petronas Fertilizer Gurun Kedah
يوليو 1997 إلى مارس 1999

ASST.SUPV.

في UNITED INSPECTION SERVICES SDN BHD
البلد : ماليزيا
 Project Equator Engineering Sdn Bhd Petronas Fertilizer Gurun Kedah.
ديسمبر 1994 إلى ديسمبر 1995

CLERK OFFICER

في  Firma Guaman Raja Azhar & Hussin Safri Kemaman Terengganu.
البلد : ماليزيا
 Firma Guaman Raja Azhar & Hussin Safri Kemaman Terengganu.

التعليم

ما هي خلفيتك التعليمية؟
اسمح لأصحاب العمل بالإطلاع على المزيد حول خلفيتك التعليمية. كن واضحاً ومختصراً.
يونيو 1997

الثانوية العامة أو ما يعادلها, Certificate Welding

في INSTITUT KEMAHIRAN MARA JOHOR
البلد : ماليزيا
Summary Over 18 years’ experience as Welding Inspector in various leading refinery, petrochemical, onshore, offshore, construction engineering and oil companies. Main responsibility to ensure that all welding operations are executed in accordance with all relevant Codes of Practices and Company procedures/practices. Other experiences include various roles on Construction Barges, Vessels and Diving based Operations, ROV based Operations, AUV Operations, Installations of Pipelines, Jackets, Top Sides, Subsea Structures, Heat Exchanger, Corrosion, Pre- Commissioning, Hydro Testing, Fabrication Structural Steel, Fabrication Bridge Steel, Installation HRSG Boiler, Pressure Vessel, Storage Tank, Piping Fabrication, Columns, Blasting / Painting, Equipment, Civil & Mechanical. Extensive international exposure dealing with other nationality ie. Europe, Asia, Middle East, Americas and Africa. Demonstrated ability in project supervision office based and offshore, quality control of operations and compliance manual and inspections reports. The ability to successfully motivate, supervise and manage project teams and monitor contractors. Familiar with industry standard HSE/QHSE systems. Has been employed by several organizations ( SARAWAK SHELL SDN BHD, CPG LABORATORIES PTE LTD, BUREAU VERITAS (M) SDN BHD, PETRONAS CARIGALI SDN BHD, CARIGALI HESS OPERATING CO. SDN BHD AND MURPHY OIL CO. LTD.) and EPCC Contractor ( MWCT PETRO CHEM (M) SDN BHD, MPL ENGINEERING SDN BHD, APECO ENGINEERING SDN BHD, PINEWELL MATRIC SDN BHD, EQUATOR ENGINEERING SDN BHD AND UNITED INSPECTION SERVICES SDN BHD.

Specialties & Skills

 Welding Inspector PCN level 2 ( 3.1 )

Inspection

Metal Fabrication

Quality Assurance

Coatings

Corrosion

Commissioning

Occupational Health

Refinery

Subsea Engineering

Supervisory Skills

Upstream & Downstream

Offshore Oil & Gas

Asset Integrity

Petrochemical

Offshore Construction

Quality Assurance

Quality Inspection

اللغات

كم من لغّة في رصيدك؟
إن تكلم لغات متعددة من الأمور الأساسية في بعض الوظائف لذا عليك إضافة المهارات اللغوية من أجل تحقيق نتائج أفضل.

الانجليزية

متوسط

التدريب والشهادات

AUT COURSE ( تدريب )

OTI Sdn Bhd
March 2011

S.M.T.C. Sea Survival & Offshore Safety Orientation ( تدريب )

S.M.T.C. Sdn Bhd
June 2002

Welding Inspector PCN level 2 ( 3.1 ) ( تدريب )

Argll – Ruane LTD United Kingdom
September 2002

Welding Inspector PCN level 2 ( 3.1 ) (REFRESHER) ( تدريب )

BINDT United Kingdom
October 2007

OFFSHORE SAFETY (REFRESHER) ( تدريب )

SEQU OFFSHORE SAFETY SDN BHD
June 2012

BASIC HYDROGEN SULPHIDE (H2S) TRAINING ( تدريب )

S.M.T.C. Sdn Bhd
June 2011

OFFSHORE SAFETY (REFRESHER) ( تدريب )

SEQU OFFSHORE SAFETY SDN BHD
June 2009

OFFSHORE SAFETY (REFRESHER) ( تدريب )

SEQU OFFSHORE SAFETY SDN BHD
June 2006

Welding Inspector PCN level 2 ( 3.1 ) (REFRESHER) ( تدريب )

MINDT Sdn BHD
July 2012

PTW COURSE ( تدريب )

Petronas Cari Gali
April 2012

الهوايات والاهتمامات

شارك هواياتك واهتماماتك كي يتمكن اصحاب العمل من التعرف عليك اكثر
أفضل طريقة أمام أصحاب العمل لمعرفة المزيد عنك هي بالإطلاع على هوايتك واهتماماتك.

Travel And Car

تحميل
تحميل...
تحميل...