Total Years of Experience: 8 Years, 5 Months
January 2018
To April 2019
Lead Mechanical Engineer
at Al-TOUKHI COMPANY for Industry, Trading& Contracting.
Location :
Saudi Arabia
-Estimate, prepare and assign resources such as manpower, materials, consumables, equipment,
Tools, etc.
- Carrying out all mechanical construction work at the site such as the installation of equipment and
Erection of piping.
- Follow up the startup & commissioning activities such as flushing, chemical cleaning of piping systems,
All equipment (pumps, hydraulic units of diverter damper - HP/LP bypass Hydraulic valves, & WTP), Steam blowing, ACC cleaning, HP/LP bypass operation, and plant synchronization.
Tools, etc.
- Carrying out all mechanical construction work at the site such as the installation of equipment and
Erection of piping.
- Follow up the startup & commissioning activities such as flushing, chemical cleaning of piping systems,
All equipment (pumps, hydraulic units of diverter damper - HP/LP bypass Hydraulic valves, & WTP), Steam blowing, ACC cleaning, HP/LP bypass operation, and plant synchronization.
March 2016
To October 2017
Site Mechanical Engineer
at Al-TOUKHI COMPANY for Industry, Trading& Contracting.
Location :
Saudi Arabia - Hail
► Project: Conversion of Hail-2 CC Simple Cycle to Combined Cycle Power Plant.
• Owner: Saudi Electricity Company.
• Responsibilities:-
- Reported to site manager directly.
- Estimate, prepares and assigns the resources such as manpower, materials, consumables, equipment, Tools, etc.
- Carrying out all mechanical works and equipment’s installation activities (WTP, BFP, CEP& CCW).
- Installation overhead crane for STG and all static equipment (deaerator, drain tanks of HRSG &ST&
CCW expansion tank).
- Supervise on assembly& erection of steel structure for (Main Pipe Rack, HP/LP Bypass Rack & Auxiliary Racks, etc...).
- Make lifting plan & supervise on lifting equipment for any heavy parts.
- Supervise on erection of piping and make sketch for as built in AutoCAD.
- Review the WPS before starting the welding process.
-Able to lead site personnel to execute and completion of job on time at site.
• Owner: Saudi Electricity Company.
• Responsibilities:-
- Reported to site manager directly.
- Estimate, prepares and assigns the resources such as manpower, materials, consumables, equipment, Tools, etc.
- Carrying out all mechanical works and equipment’s installation activities (WTP, BFP, CEP& CCW).
- Installation overhead crane for STG and all static equipment (deaerator, drain tanks of HRSG &ST&
CCW expansion tank).
- Supervise on assembly& erection of steel structure for (Main Pipe Rack, HP/LP Bypass Rack & Auxiliary Racks, etc...).
- Make lifting plan & supervise on lifting equipment for any heavy parts.
- Supervise on erection of piping and make sketch for as built in AutoCAD.
- Review the WPS before starting the welding process.
-Able to lead site personnel to execute and completion of job on time at site.
March 2015
To March 2016
Mechanical Construction Engineer
at IsoTermica Contracting L.L.C.
Location :
Egypt - Ismailia
► Project: ERC Refinery Project, Cairo, Egypt.
• Client: GS Engineering & Construction Corp.
• Responsibilities:-
- Reported to site manager directly.
- Follow up activity on site and insure the work is performed accord to client specification and safety
Requirement.
- Ensures that all site works are done according to all applicable quality standards.
- Supervise on assembly& erection of steel structure racks.
- Supervise on erection of piping, hydro test and flushing.
- Supervise of all activities for surface preparation and coating (Painting and Insulation) for
(Piping, Supports).
- Collaborate with cost control and planning department in preparing the daily progress reports.
- Also have high ability to solve problems if there were mismatch between install and drawing after
Coordinate with the owner.
• Client: GS Engineering & Construction Corp.
• Responsibilities:-
- Reported to site manager directly.
- Follow up activity on site and insure the work is performed accord to client specification and safety
Requirement.
- Ensures that all site works are done according to all applicable quality standards.
- Supervise on assembly& erection of steel structure racks.
- Supervise on erection of piping, hydro test and flushing.
- Supervise of all activities for surface preparation and coating (Painting and Insulation) for
(Piping, Supports).
- Collaborate with cost control and planning department in preparing the daily progress reports.
- Also have high ability to solve problems if there were mismatch between install and drawing after
Coordinate with the owner.
November 2013
To March 2015
Site Engineer
at ALHUSSAM CONTRACTING.
Location :
Egypt - Suez
► Project: Direct Reduction Plant Ezz Steel, Ain Alsokhna, Egypt.
• Subcontractor: MARIOUT Engineering & Construction.
• Client: DANIALI.
• Responsibilities:-
- Generally responsible for implementation and monitoring of all mechanical related works at site
As per approved drawings and methods.
-Assembly& erection of steel structure for pipe rack and stack.
- The equipment installation and alignment.
-Erection of piping, hydro test and flushing.
-Perform survey report after finish erection.
- Ensure all works are carried out to the highest standards of HSE in accordance with the project, client
And the owner standards.
• Subcontractor: MARIOUT Engineering & Construction.
• Client: DANIALI.
• Responsibilities:-
- Generally responsible for implementation and monitoring of all mechanical related works at site
As per approved drawings and methods.
-Assembly& erection of steel structure for pipe rack and stack.
- The equipment installation and alignment.
-Erection of piping, hydro test and flushing.
-Perform survey report after finish erection.
- Ensure all works are carried out to the highest standards of HSE in accordance with the project, client
And the owner standards.
April 2013
To November 2013
Site Engineer
at Eneregya for Engineering and Construction.
Location :
Egypt - Cairo
► Project: Banha Power Station 750 MW Combined Cycle Project Units 1 & 2 / CP-105.
• Client: Ansaldo Caldaie SpA.
• Responsibilities:-
- Reported to construction manager.
- Follow up activity on site and insure the work is performed accord to client specification and safety
Requirement.
- Confirm Control the manpower load and their distribution over the site according to the workload and
Completion schedule.
- Supervise on erection of piping, hydro test and flushing.
- Supervise of all activities for insulation (Piping, Stack, Drums &Tanks).
-Perform survey report after finish erection.
-Perform and Coordinate and control the preparation of as-built drawings.
- Also have high ability to solve problems if there were mismatch between install and drawing after
Coordinate with the owner.
• Client: Ansaldo Caldaie SpA.
• Responsibilities:-
- Reported to construction manager.
- Follow up activity on site and insure the work is performed accord to client specification and safety
Requirement.
- Confirm Control the manpower load and their distribution over the site according to the workload and
Completion schedule.
- Supervise on erection of piping, hydro test and flushing.
- Supervise of all activities for insulation (Piping, Stack, Drums &Tanks).
-Perform survey report after finish erection.
-Perform and Coordinate and control the preparation of as-built drawings.
- Also have high ability to solve problems if there were mismatch between install and drawing after
Coordinate with the owner.
October 2010
To April 2013
Mechanical Engineer Officer
at Armed Forces Engineering Authority
Location :
Egypt - Cairo
• Responsibilities: -
- Leading hundred soldiers and five NCOs to perform all military and construction activities.
- Ensure the optimal level of productivity from the team.
- Supervising the construction activities (erection, alignment, welding).
- Erection of steel structure for building & racks.
- Erection of piping, hydro test and flushing.
- Installation the pumps skids and shaft alignment.
- Perform and provide resolution of construction problem.
-Resolve any unexpected technical difficulties and other problems at site that may arise at any time.
- Leading hundred soldiers and five NCOs to perform all military and construction activities.
- Ensure the optimal level of productivity from the team.
- Supervising the construction activities (erection, alignment, welding).
- Erection of steel structure for building & racks.
- Erection of piping, hydro test and flushing.
- Installation the pumps skids and shaft alignment.
- Perform and provide resolution of construction problem.
-Resolve any unexpected technical difficulties and other problems at site that may arise at any time.
Share on Facebook
Share on Twitter
Share Via Email