Isa Muhammad Syazwan

1. Perform the electrical system pre-commissioning, testing, and commissioning activities of all Shell
premise plant / facility including HV and LV electrical systems (onshore & offshore) and ensure all
construction & (pre)commissioning ITRs (check sheets) are
2. Witnessed and signed off in accordance with project technical requirement and company HSSE
standards.

1. Interface multidiscipline section in solving issue with regards to technical perspective in both
marine and Topside E&I engineering issue.
2. Responsible to issue Subsystem Boundry Diagram and related Commissioning Test Procedure.
3. Responsible for preparing and review ITB for load bank rental for load test of 34MW Gas Turbine
Generator, 4.84MW Diesel Generator and 1.6MW Emergency Generator.
4. Established E&I precedence network based on the system priority for both Marine and Topside.
5. Review Tools & consumables and spares related to commissioning usage.
6. Review Technical Query (TQ) related to E&I section and respond according to the best solution and
approach of the solution.
7. Liaison with the construction of system readiness and completion management.
8. Established the Black Start/Black out procedure.
9. Involved on various system package pre-commissioning & commissioning:
a. Siemens HV/LV Switchboard - functional test, Siprotec and simocode protection relay

1. Package Engineer for Gas Turbine Generator (6.59MW) and Emergency Diesel Generator
(1.6MW)
2. Responsible to review and correct all vendor technical drawing till approved for construction.
3. Interface multidiscipline section in solving issue with regards to process, dimensional arrangement, IO
interface, construction interface as well as commissioning interface.
4. Review project specification and ensure deliverable is in line with project requirement, any deviation
supported with technical justification.
5. Familiarize with ASSAI - web base documentation system.
6. Closely monitor Vendors fabrication progress as well documentation submission according to
agreed VDRL.
7. Assisting project Lead to ensure GTG & EDG schedule deliverable to meet target as overall project
planning.

1. Responsible to cover scope of E&I for testing and commissioning.

1. Offshore - Seconded to Technip for warranty claim issues. (1.5 years)
2. Onshore - Appointed to support on pre-commissioning and commissioning for Power Generation
and Distribution System.
3. Dedicate to lead all discipline on pre-commissioning and commissioning the GTG.
4. Preparation of mobilization of vendor to carry out pre-commissioning activities.
5. Coordinate with Construction focal points and/or planner or scheduler to ensure timely completion
of other activities prior to commencement of Onshore Testing & Commissioning activities.
6. Directly involve on trouble shooting during pre-commissioning and commissioning activities.
7. Liaise with client during preparation of pre-commissioning procedures, scheduling of testing &
commissioning activities, consumable required and provide support during commissioning activities.
8. Coordinate and ensure mechanical completion activities adhere to contract, drawings &
specifications, codes & standards and Vendor recommendations.
9. Involved on various system package pre-commissioning & commissioning:
a. 6 units of GTG Package (6.6kV, 5.5MW) - Functional test, Crank Test, Load Test & Endurance Test.
b. ATSL - signal exchange test for all design scenario.
c. VFD for Sea Water Lift Motor, cooling system using glycol - functional test, parameter test, &
commissioning

1. Appointed as Offshore Team Leader and seconded as client representative for offshore
commissioning and start-up work.
2. Manage 72 hours performance test for all required electrical related system.
3. Managing all work forces to ensure required resources are sufficient prior to execute commissioning
related work plan as well as construction.
4. Coordinate vendor, manpower as well as material mobilisation based on priority.
5. Ensure all offshore related work perform in safely manner and deliver/ handover to operation.
6. Assist operation to achieve first oil readiness as well as first gas readiness.
7. Appointed as Onshore Lead Engineer (Marine)
8. Carry out Decommissioning activities for all existing electrical fixtures and associated items prior to
conversion process.
9. Coordinate and ensure mechanical completion activities adhere to contract, drawings &
specifications, codes & standards and Vendor recommendations.
10. Liaise with client during preparation of pre-commissioning procedures, scheduling of testing &
commissioning activities, consumable required and provide support during commissioning activities.
1 1. Directly involve on trouble shooting during pre-commissioning and commissioning activities.
12. Coordinate with Construction focal points and/or planner or scheduler to ensure timely completion
of other activities prior to commencement of Onshore Testing & Commissioning activities.
13. Preparation of mobilization of vendor to carry out pre-commissioning activities.
14. Involved on various system package pre-commissioning & commissioning

1. Responsible to cover scope of E&I for testing and commissioning.
2. Assisting in preparation of overall commissioning schedule to meet target as overall project planning.
3. Liaise with contractor during preparation of pre-commissioning procedures, scheduling of testing &
commissioning activities and provide support during commissioning activities.
4. Preparing job planning, manpower, and consumable required.
5. Coordinate with Construction focal points and/or planner or scheduler to ensure timely completion
of other activities prior to commencement of Onshore/Offshore Testing & Commissioning activities.
6. Assist vendor for start-up new system install onboard.
7. Directly involved with site testing & commissioning activities either with contractors.
8. Ensure documentation, subordinates implement inspection procedure or work instruction and quality
control plans.
9. Prepare final documentation for hand over to client. Work and discuss together with management
for all onshore/offshore activities.

1. Coordinate with PMT on equipment installation schedule to ensure timely commencement of
instrument completion activities for related systems.
2. Coordinate and ensure mechanical completion activities adhere to contract, drawings &
specifications, codes & standards and Vendor recommendations.
3. Review and approved pre-commissioning procedures, scheduling of testing & commissioning
activities, consumable required and provide support during commissioning activities.
4. Assist on trouble shooting during pre-commissioning and commissioning activities.
5. Review project contract, drawing and specifications.
6. Coordinate with Construction focal points and/or planner or scheduler to ensure timely completion
of other activities prior to commencement of Onshore Testing & Commissioning activities.
7. Prepared job planning, manpower, and consumable required.
8. Fulfilled the safety requirement during the project for example perform JSA.
9. Ensure documented, subordinates implement inspection procedure or work instruction and quality
control plans.
10. Review commissioning check sheet and sign off checksheet.

1. Assist vendor in rectification work on New Mooring Winch and Anchor Windlass system during
construction and commissioning.
2. Performing functional test of new motors and Distribution Panels.
3. Advice on documentation flow process, subordinates implement inspection procedure or work
instruction and quality control plans.
4. Review final documentation for final hand over process.

1. Responsible to cover scope of E&I for testing and commissioning.
2. Assisting in preparation of overall commissioning schedule to meet target as overall project planning.
3. Liaise with client during preparation of pre-commissioning procedures, scheduling of testing &
commissioning activities and provide support during commissioning activities.
4. Preparing job planning, manpower, and consumable required.
5. Monitor mobilization of manpowers support for commissioning offshore activities, and prepare
scope of work for supervisor to meet the deadlines.
6. Directly involved with site testing & commissioning activities: Load testing for 6 Nos. of Main
Generators & Emergency Diesel Generator.

1. Assigned as Project Management Team for Electrical Section as well as Testing & Commissioning
Engineer (Electrical Section).
2. Assigned to carry out commissioning activities for all existing and new electrical fixtures and
associated items.
3. Prepare overall schedule and monitor execution of commissioning activities.
4. Review final documentation for hand over process.

1. Assigned as Project Management Team for Electrical Section as well as Electrical Commissioning
Engineer.
2. Coordinate on sequencing construction work for Electrical & Instrumentation item install as per contract.
3. Assisting in preparation of overall commissioning schedule to meet target as overall project planning.
4. Advise and assist overall preparation of pre-commissioning procedures, scheduling of testing &
commissioning activities and provide support during commissioning activities.
5. Directly involved with site testing & commissioning activities: Load testing for Emergency Diesel
Generator.
6. Review final documentation for hand over process.

Lead and supervise appointed foremen, including subcontractors, throughout the project.
Oversee all electrical components related to refurbishment and new system installations.
Plan and execute site activities (both onboard ship and in the workshop) to prevent conflicts with other parties that may cause delays.
Review construction and P&ID drawings prior to commencing fabrication and installation work.
Ensure quality workmanship by subcontractors in line with QA/QC requirements, and coordinate inspections with the client and class surveyor.
Enforce safety requirements for all personnel, including subcontractors, throughout the duration of the project.
Conduct testing and commissioning of the marine electrical systems following mechanical completion (MC).

1. Responsible to cover scope of Electrical for testing and commissioning.
2. Assisting in preparation of overall commissioning schedule to meet target as overall project planning.
3. Liaise with client during preparation of pre-commissioning procedures, scheduling of testing &
commissioning activities and provide support during commissioning activities.
4. Prepare check sheet and ensure system readiness prior to pre-commissioning stages.
5. Prepare final documentation for hand over to client.

1. Responsible to cover scope of Electrical for testing and commissioning.
2. Assisting in preparation of overall commissioning schedule to meet target as overall project planning.
3. Liaise with client during preparation of pre-commissioning procedures, scheduling of testing &
commissioning activities and provide support during commissioning activities.
4. Prepare check sheet and ensure system readiness prior to pre-commissioning stages.

1. Responsible to cover scope of Electrical for testing and commissioning.
2. Assisting in preparation of overall commissioning schedule to meet target as overall project planning.
3. Liaise with client during preparation of pre-commissioning procedures, scheduling of testing &
commissioning activities and provide support during commissioning activities.
4. Prepare check sheet and ensure system readiness prior to pre-commissioning stages.