MUHAMMAD NAEEM

Responsible for the preparation, submission, and approval of project related documents as per the client requirements.
• Involve at design related activities, reviewing of design drawing, documents, resolving & closure of client comments, preparation of materials list, preparing subcontractor scope of work.
• Fully aware about the rule and regulation, planning, schedules, strategies and on-site implementation of project tasks.
• Preparation & reviewing of the FAT/SAT related documentation & deeply involved at the FAT/SAT activities.
• Lead in the provision of engineering input for development and maintenance of Electrical systems & equipment standards, procedures, best practices, inspection contracts, and contractor selection guidelines.
• Check calculations made by other engineers to ensure accuracy, conformance to codes, specifications, and design criteria and conformance to good engineering practice.
• Directs activities to ensure that construction, installation, and operational testing is conform to functional specifications, recognized codes, standards, and customer requirements.
• In depth knowledge about all electrical & instrument’s installation, pre-commissioning, and commissioning activities.
• Interacting with clients, preparing daily, weekly and monthly progress report.
• Strong knowledge related to instrumentation & control design drawings & documentation.
• Managing subcontractor work & sharing technical requirements with them for the successful execution of site activities from start to end.
• leading & Supervision of site activities from installation up to commissioning & startup.
• Preparing commissioning documents for the instruments & equipment’s energization.
• Responsible for the preparation loop folders, commissioning dossories, check list for the installation and commissioning activities, walkthrough packages & PRB at the time of completion of project & handover project.
• Uses advanced technical knowledge to perform engineering assignments and produce engineering deliverables including complex problems and to complete any project tasks with minimal guidance and direction.

• Interacting with contractor and subcontractors to interpret client needs and requirements as per agreed project scope of work.
• Managing both internal and external sources of information and interfaces according to the project scope and schedule.
• Reviewing Project Scope of work, Strategies, execution plan, Constructing Strategies, etc.
• Coordinating & expediting technical interfaces between various engineering offices of the project design team and construction team.
• Responsible for the installation & commissioning of instrumentation & control system.
• Reviewing the incoming submittals submitted by contractor and subcontractors.
• Expediting submittal and close out of Work Package Plan deliverables.
• Resolving interface problems and driving forward the timely escalation of matters unresolved through relevant Working Groups
• Provide support to internal and external stakeholders during project execution to meet project objectives.
• Assisting review and finalization of overall Project Schedules, Progress monitoring and expediting.
• Participation in finalization of Sub-Contracts.
• Prepare test plans, supervise and coordinate commissioning activities for Industrial networks such as Profibus DP/PA, Modbus communications, hardwiring I/O signals both analog and digital, MCM (Machinery Condition Monitoring).
• Handles commissioning and test of pressure switches, level transmitters, Pressure transmitters, Temperature transmitters, Pneumatic Valves, water quality equipment such as PH, Turbidity by following I/O signal list.
• Oversee setting-up and testing of different systems networks/buses.
• Ensure that the commissioning obligations of the project are carried out in accordance with the terms of contract, quality, and schedule in conformance with good practice of commissioning standards.
• Prepare the taking over request of system or sub-system and managing the taking over process between the Construction team and the Commissioning team.

• Installation of electrical equipment, including, Power distribution panels, Dry type transformers, MV and HV equipment & cables, UPS & battery charger systems, circuit breaker cubicles, Heat Tracing Systems, Electrical Control systems, HV and LV motors and relevant control/ protection systems.
• Installation of instrument and power cable trays & conduits according to approved routing plan.
• Responsible for the installation, commissioning & inspection of complete site instrument & instrument JB’s (AJB, DJB, EDJB, MB, FJB, TIT, LIT, PDIT, TE, RTD, PIT, PI, AAH, ALH, AHS, CAM, CP, RTU, MOV, HS).
• Installation of Analyzers Houses, DCS cabinets, ESD Cabinets, VMS Systems, GOV and Console.
• Define the construction & commissioning deliverables in the form Systems, Areas, Buildings& Modules.
• Ensure all quality control records for the work are progressively accumulated, indexed & available to support a phased systematic acceptance & handover of the plant to the Client in accordance with the project Acceptance of the Work Plan.
• Compile & consolidate punch lists and provide auditable trail to ensure that all punch list items are recorded & signed off by authorized personal upon completion.
• Follow up construction superintendents and construction supervisor of status of completion of projects and provide progress & status report as required.
• Set up, populate & maintain the turnover and acceptance of the work database system or other database engineering information system used to track progress & store Hand over Data.
• Responsible for submitting all the turnover documents to the client during project completion.
• Check daily updating Master Punch and Turnover data base as per the as the work completes on the site.
• Ensure the Acceptance of the Work processes is clearly specified & agreed with Client before implementation, ensure compliance with these requirements thereafter.
• Verify turn over package completeness before issue. Preparing turn over books.
• Responsible for the submitting of all for turn-over documents to client during project completion.
• Check Daily updating the Master Punch and Turn over Database of various locations.
• Prepare the detailed workflow and instruction for the document control to perform the work correctly.

• Installation, Pre-Com & Inspection of onshore/offshore electrical equipment, including; (switchgears, switch racks, power panels, 13.8kv-480v transformers, Navigation Light System, MV and HV equipment, UPS & battery charger systems, splice cases, circuit breaker cubicles, MCC, Heat Tracing Systems, Submarine cables, Electrical Control systems, including frequency inverters, PLC, HV and LV motors and relevant control/ protection systems.
• Responsible for the completion and inspection of complete instrumentation & inst. JB’s. (AJB, DJB, EDJB, MB, FJB, DPIT, TE, PIT, TIT, LIT, PI, AAH, ALH, AHS, CAM, CP, RTU, MOV, HS).
• Preparing overall installation, commissioning and inspection report for company record & management review
• Punch list preparation and closing of open punches. Checking of daily progress & updating master punch database as per the work completed on site.
• Involve in commissioning activities and monitoring construction progress to make sure that pre- commissioning activities schedule not effect & instruct relevant department to complete priority base work.
• Responsible for preparation & maintaining of pre-commissioning record & site observation, testing process and checklist.
• Ensuring that all pre-commissioning activities are logged record with progress monitor in their sub- system.
• Preparing report to project manager of daily weekly and monthly basis. Attending client meeting and presenting presentation of work progress.
• Preparing look ahead plan of project activities on priority base.
• Close coordination with procurement and warehouse team to arrange ship loose material and make sure delivery to offshore on time.
• Prepare project documents/Packages and cross check with other departments to m

• Provide support the senior project team in planning, material deliverables, manpower allocation & site work execution.
• Manage materials, labour within the allocated budget and resources, ensuring their safe, effective and efficient delivery of service on the project site.
• Ensure all systems, design information, procedures and quality systems are effectively communicated.
• Regular meetings with project teams, identifying best practice, areas for improvement and areas of concern, including matters relating to safety, finance or quality.
• Develop and maintain relationships with relevant customers including technical consultants and suppliers, managing their input in the design, development, pricing, and delivery of technical. solutions on site.
• Provide coaching and motivation to the project team, to deliver high performance on the project and create a culture of continuous improvement.
• Ensure that the engineering is efficiently managed so that it is fit for purpose from conception right through installation and maintenance, recognizing site conditions & constraints and other statutory regulations and customer requirements.
• Ensure the efficient operation of procurement, material control policies and procedures are adopted.
• Ensure the customer requirements are clearly understood and that Quality Control mechanisms are in place that provide assurance that the asset and/or service delivers as designed/required.
• Contribute to the accurate and efficient provision of progress and productivity reports weekly and monthly to senior management, in accordance with company procedures.

Supervise and support operation team on all maintenance related issues.
• Troubleshooting of electrical & instrumentation systems/equipment.
• Install, inspect, repair and maintain the electrical equipment and onsite installed instruments.
• Installation and troubleshooting of Level Switch, Control Valve, Hand Valve, Sight Glass, Orifice Plate, Flow Nozzles, Level Transmitter, Pressure Transmitter, Temperature transmitter, Flow Transmitter, Level gauge, Gate valve, Butterfly Valve, Globe valve, Positioner, Motor operated valve, Solenoid valve Etc.
• Confirmation of onsite instrument in P&ID and location drawing.
• Verification of P&ID, Location drawing and datasheet with instrument install in the field.
• Verification of line number, Service, Line size, Power supply (Voltage & Current rating), Electrical connection, Switch types, Operating Pressure, Serial number, Model number and other Parameter of Instruments on site.

Role: Engineering In charge (EIC) in following Projects with SABIC Jubail.
• Design Engineering, supply installation and testing of two numbers 2MVA ONAN Transformers with fire alarm control panel and heat detector system, bus duct and other accessories at Al- Bayroni Sabic Al-Jubail.
• Design and installation of Expansion vessel at EO supply line to the ethoxylate along with all with all associated work in Saudi Kayan.
• Oily Water Separator at Project SADAF.
Work as a Discipline Engineer E&I in Following Project with SABIC Yanbu:
• Design and installation of mass flow meter junction box MCC panel bus Ducts and digital control system at SCADO Yanbu.
• SEP Ethane Metering Skid Yanbu Saudi Arab.
• Aldehyde Vent Reduction Yanbu Ibn-Rushd Saudi Arab.
Major Work Responsibilities:
• Design and review of engineering drawings & documents like Specification Sheet, interconnection diagram, installation schedule, loop diagrams, I/O list, cable schedule, single line diagram, elementary diagram, cause & effect diagram, layout drawing & P&ID drawing in accordance with project specification.
• Provide support for the installation of new equipment, including working with the vendor to ensure that equipment is installed according to drawings and specifications.
• Review test results carried out by lower level technicians during maintenance.
• Electrical Calculation including lightening calculation cable size calculation and load calculation.
• Preparing Elementary diagram, wiring diagram, single line diagram etc.
• Preparing construction scope of work, BOM and other relevant documents.
• Cable routing for electrical and instrumentation cable through cable tray and duct bank.
• Preparing electrical cable schedule MCC tabulation and Instrument index.
• Develop preventive maintenance procedures for new equipment in their area of operation.
• Direct continuous monitoring and control of the power distribution system within their area for optimum overall system reliability.
• Maintaining projects record from design stage to site installation, Answer to query raised by site teams. Keeping record of the red-line & updated drawings in as-built for final submission during project closure phase.
• Familiar from SABIC & ARAMCO Standard of Electrical and Instrumentation Engineering NEMA, NEC and IEC.

Operates and performs routine maintenance of equipment associated with plant operations and the production of utilities.
• Operates generators, electrical switchgear and substations as well as associated auxiliary equipment.
• Maintains logs, prepares equipment for operations or shutdown condition, monitors instrument readings and performs related duties as assigned.
• Tests as well as repairs electrical equipment.
• Testing of electrical circuits & components to locate shorts, faulty connections plus defective parts, using test meters.
• Disassembles equipment as well as repairs or replaces faulty parts

• Wireless Land Line WLL
• Configuration and error removal of external alarms.
• Monitoring and Troubleshooting
• Back-office support provides technical support to site engineers through remote and on- site trouble- shooting to remove alarms of sites including rollout sites.
• Install, Configure and operate LAN & WAN services securely.
• RJ-45 (cat-5 and cat-6) and Optical Fiber connector making.

Work in following shops during internship at POF
• B&G. Small Arm ammunition factory.
• Brass mill. Automatic Power Factor Panels.