Total Years of Experience: 15 Years, 11 Months
February 2015
To Present
production manager
at STLOP ( Saudi Technology Lube Oil Plant)
Location :
Saudi Arabia - Alkharj
• Prepared annual production plan.
• Prepared / updated monthly production forecast of re-refined base oils.
• Reviewed ( Daily, weekly, Monthly performance ).
• Oversaw all plant operations and corrected production issues.
• Problem Solving.
• Monitored manufacturing to ensure it stayed on schedule and remained within budget constraints.
• Monitored workers to ensure they maintained safety standards.
• Ensured the respect of the waste management plan released by the plant's units.
• Derived average (weekly, monthly) requirement of materials from monthly plant.
• Determined when to replace equipment.
• Prepared / updated monthly production forecast of re-refined base oils.
• Reviewed ( Daily, weekly, Monthly performance ).
• Oversaw all plant operations and corrected production issues.
• Problem Solving.
• Monitored manufacturing to ensure it stayed on schedule and remained within budget constraints.
• Monitored workers to ensure they maintained safety standards.
• Ensured the respect of the waste management plan released by the plant's units.
• Derived average (weekly, monthly) requirement of materials from monthly plant.
• Determined when to replace equipment.
January 2011
To Present
Process Engineer
at Shell Company In Syria - AFPC
Location :
Syria
1. Calibration Injection of oil field chemicals & Make all calculations.
2. Troubleshooting problems involving oil, water and gas process engineering, separation and treatment quality issues along with associated production chemistry and application systems.
3.Provided proactive day-to-day support to Production and Maintenance teams with respect to optimum, efficient and safe plant operation.
4. Assisted process engineer in technical monitoring and troubleshooting of the Utility systems.
5.Monitored plant performance against approved targets on a day-to-day basis and identified existing or potential technical problems.
6.Monitored utility system behavior for adverse trends to allow fast response to potential threats.
7. Identified & implemented specific projects and plant changes to improve the safety, reliability, integrity, efficiency, operability and capacity of the utility systems.
8. Provided process & operational inputs into the technical safety & operability reviews, training operators, maintenance activities, and performance test-runs.
9. Participated in incident investigations and problem solving for the utility systems.
10. PLC skills
2. Troubleshooting problems involving oil, water and gas process engineering, separation and treatment quality issues along with associated production chemistry and application systems.
3.Provided proactive day-to-day support to Production and Maintenance teams with respect to optimum, efficient and safe plant operation.
4. Assisted process engineer in technical monitoring and troubleshooting of the Utility systems.
5.Monitored plant performance against approved targets on a day-to-day basis and identified existing or potential technical problems.
6.Monitored utility system behavior for adverse trends to allow fast response to potential threats.
7. Identified & implemented specific projects and plant changes to improve the safety, reliability, integrity, efficiency, operability and capacity of the utility systems.
8. Provided process & operational inputs into the technical safety & operability reviews, training operators, maintenance activities, and performance test-runs.
9. Participated in incident investigations and problem solving for the utility systems.
10. PLC skills
August 2012
To February 2015
Process Engineer
at Saudi Technology Base lube Oil Plant
Location :
Saudi Arabia - Alkharj
• Attended in all Pre-commissioning and Commissioning activities & first start-up for STLOP plant.
• Checked of all operating parameters of the re-refining unit.
• Followed and respect the monthly production plan.
• Attended and assist the DCS operator in the starting and stopping of the heater and all control system issue.
• Followed and control the operation of the unit from reading instruments and laboratory analyzes and coordinate with production head before make the necessary changes to the operating parameters.
• Made the (daily, weekly, monthly) report for usage material.
• Followed to the chemical and usage material stock and send a weekly report to production head.
• Ensured about susceptibility and electrical insulation of equipment before the intervention by the maintenance team.
• Ensured the well running of the unit and the safety of all other services outside office hours.
• Ensured the respect of the Quality Management Systems, the Safety and the Environment.
• Checked of all operating parameters of the re-refining unit.
• Followed and respect the monthly production plan.
• Attended and assist the DCS operator in the starting and stopping of the heater and all control system issue.
• Followed and control the operation of the unit from reading instruments and laboratory analyzes and coordinate with production head before make the necessary changes to the operating parameters.
• Made the (daily, weekly, monthly) report for usage material.
• Followed to the chemical and usage material stock and send a weekly report to production head.
• Ensured about susceptibility and electrical insulation of equipment before the intervention by the maintenance team.
• Ensured the well running of the unit and the safety of all other services outside office hours.
• Ensured the respect of the Quality Management Systems, the Safety and the Environment.
January 2010
To January 2011
Chemical Junior Engineer
at AFPC Alfurat Petrolum Company (Shell Syria)
Location :
Syria
Employee in AFPC (Al Furat Petroleum Company)(Shell Syria) as a Chemical Engineer- Process Engineer (Junior Engineer) .I finished till now the following Sub-Surface technical courses : Geology and exploration, Basic Reservoir, Drilling Technology, well service & well completions & Production technology. Then I started with Surface technical courses and finished the following courses : Oil production & processing, HSE, Gas production and processing, Technical integrity and corrosion, water treatment & water injection, Maintenance of rotating & stationary equipments, ESR (Electrical Safety Rules), Basics of Electrical maintenance, oil transformation and Storage, Workshop of Artificial lift and Basics of instrumentation & Process control .Then I finished the following soft skills courses : Report writing, Team Work, Presentation Skills and communication Skills. Recently I started with advanced technical courses and finished till now the following courses : Advanced Reservoir Engineering, Reservoir Characterization, Reservoir Stimulation and EOR (Enhanced Oil Recovery).
April 2008
To January 2010
Lab Supervisor
at Oudeh Petrolum Copmpany (SENOPIC Syria)
Location :
Syria
1. Prepared technical literature on industrial process technology, process economics and product markets and overall commercial viability of processing facilities.
2. Conducted marketing, process design and process development studies under the supervision of lead engineer.
3. Developed process chemistry, process design parameters and prepared process block diagrams and pipe and instrumentation diagrams.
4. Prepared technical programs for bench scale and pilot scale testing of industrial unit operations and integrated process flowsheets.
5. Prepared cost estimates for procurement of equipment and chemical reagents.
5. Coordinated sample analysis with analytical / compound identification laboratories.
6. Assessed technical data and prepared graphical representation of test data.
7. Prepared technical reports and presentation of test program results.
8. Supervised laboratory test programs and in-plant troubleshooting test programs.
9. Prepared reports and laboratory procedures.
10. Supervising and doing oil& water Laboratory Testing.
11. Reports the results of the production and the operating parameters.
12. Preparing reports, field readings, daily averages, morning reports, shift reports
2. Conducted marketing, process design and process development studies under the supervision of lead engineer.
3. Developed process chemistry, process design parameters and prepared process block diagrams and pipe and instrumentation diagrams.
4. Prepared technical programs for bench scale and pilot scale testing of industrial unit operations and integrated process flowsheets.
5. Prepared cost estimates for procurement of equipment and chemical reagents.
5. Coordinated sample analysis with analytical / compound identification laboratories.
6. Assessed technical data and prepared graphical representation of test data.
7. Prepared technical reports and presentation of test program results.
8. Supervised laboratory test programs and in-plant troubleshooting test programs.
9. Prepared reports and laboratory procedures.
10. Supervising and doing oil& water Laboratory Testing.
11. Reports the results of the production and the operating parameters.
12. Preparing reports, field readings, daily averages, morning reports, shift reports
Share on Facebook
Share on Twitter
Share Via Email