Total Years of Experience: 27 Years, 10 Months
July 2007
To August 2013
Electrical Engineer
at SABIC, Al-Jubail Petrochemical Co.
Location :
Saudi Arabia - Jubail
• Project Proposal Review and feasibility study
• Preparation/Review of CDP and Front End Engineering Design Packages (FEED).
• Review and approval of Detailed Engineering Packages includes Specification/Data Sheet, Project Drawings, Detailed scope of Work, Bill of materials, Codes and Standards Statement, Scope of materials supply, Project Scheduling, Inspection, Safety & Quality requirements Etc.
• Preparation / Review of design calculation such as Generator, Transformer sizing, Breaker sizing, Cable sizing, Battery sizing, Lighting etc, and electrical power adequacy study report.
• Review and approval of EPC contractor’s BDEP & DEP documents, TR/MR for procurements, Technical Bid Evaluations, IFC (Issued for Construction) packages and project execution plans.
• Witnessing of FAT and SAT
• To prepare the schedule of maintenance activities and to follow the maintenance activities as per schedule.
• Follows up to ensure all activities are carried out in a safe and high technical standard, timely, efficient and cost effective manner to maximize plant availability to meet production targets.
• Issues Hot & Cold work permits and excavation work permits according to work nature as per company safety standard procedure.
• Work permit approval for maintenance job.
• Maintain and ensure the availability of Tools, spares, critical spares and consumables for trouble free execution of all maintenance activities.
• Investigate chronic maintenance problems by reviewing and analyzing reliable plant and equipment maintenance data.
• Recommends appropriate solution to prevent recurrence.
• Identifying plant constraints/bottle necks affecting efficient operation of the plant. Conduct appropriate test runs and suggest recommendations to achieve the objective.
• Preparation/review of predictive and preventive maintenance programs.
• Preparation/review of SOP & SMP.
• Liaise with other discipline engineers for smooth running of plant operation.
• Providing technical support to Operations and Maintenance Departments.
• Provides expert advice to operations on maintenance issues related to electrical process equipment.
• To create notification through SAP for maintenance activities and to update maintenance records.
• Equipment spares planning and procurement through SAP.
• Active participation in the HAZOP/Risk Assessment and implementing HAZOP/Risk Assessment recommendations successfully.
• Complying company Health, Safety and Environment policies and procedures.
• Proactive in identifying safety observation, near miss and reporting safety issues in work place.
• As-Built Review and Approval.
• Preparation/Review of CDP and Front End Engineering Design Packages (FEED).
• Review and approval of Detailed Engineering Packages includes Specification/Data Sheet, Project Drawings, Detailed scope of Work, Bill of materials, Codes and Standards Statement, Scope of materials supply, Project Scheduling, Inspection, Safety & Quality requirements Etc.
• Preparation / Review of design calculation such as Generator, Transformer sizing, Breaker sizing, Cable sizing, Battery sizing, Lighting etc, and electrical power adequacy study report.
• Review and approval of EPC contractor’s BDEP & DEP documents, TR/MR for procurements, Technical Bid Evaluations, IFC (Issued for Construction) packages and project execution plans.
• Witnessing of FAT and SAT
• To prepare the schedule of maintenance activities and to follow the maintenance activities as per schedule.
• Follows up to ensure all activities are carried out in a safe and high technical standard, timely, efficient and cost effective manner to maximize plant availability to meet production targets.
• Issues Hot & Cold work permits and excavation work permits according to work nature as per company safety standard procedure.
• Work permit approval for maintenance job.
• Maintain and ensure the availability of Tools, spares, critical spares and consumables for trouble free execution of all maintenance activities.
• Investigate chronic maintenance problems by reviewing and analyzing reliable plant and equipment maintenance data.
• Recommends appropriate solution to prevent recurrence.
• Identifying plant constraints/bottle necks affecting efficient operation of the plant. Conduct appropriate test runs and suggest recommendations to achieve the objective.
• Preparation/review of predictive and preventive maintenance programs.
• Preparation/review of SOP & SMP.
• Liaise with other discipline engineers for smooth running of plant operation.
• Providing technical support to Operations and Maintenance Departments.
• Provides expert advice to operations on maintenance issues related to electrical process equipment.
• To create notification through SAP for maintenance activities and to update maintenance records.
• Equipment spares planning and procurement through SAP.
• Active participation in the HAZOP/Risk Assessment and implementing HAZOP/Risk Assessment recommendations successfully.
• Complying company Health, Safety and Environment policies and procedures.
• Proactive in identifying safety observation, near miss and reporting safety issues in work place.
• As-Built Review and Approval.
April 2005
To July 2007
Manager -Electrical
at Chemplast Sanmar Limited
Location :
India - Chennai
- Responsible for operation and maintenance for all kinds of HV/MV/LV electrical equipments, Project expansion activities involving engineering documents/drawings review and approval, Review and approval of EPC Bid packages, Technical bid evaluation, installation and commissioning.
- Vast experience in all kinds of electrical equipment maintenance, trouble shooting and repair works.
-Vast experience in overhauling of AC motors which includes replacement of bearings, rotor shaft, slip rings, carbon brush, end cover, terminal blocks, stator and rotor rewinding, Servicing of MV & LV circuit breakers of oil, air blast, vacuum and SF-6 type circuit breakers.
- Condition monitoring of electrical equipment through Engineers / Supervisors / Technicians and Contract agencies
- Planning and execution of day-to-day scheduled preventive, corrective maintenance and shutdown maintenance activities on electrical equipment through Engineers / Supervisors / Technicians and Contract agencies.
- Equipment spares planning and procurement through SAP.
- Documenting SOP, SMP, ISO 14001 and maintaining records.
- Implementing safety practices in consultation with Safety officer.
- Active participation in the HAZOP study and preparation of Job Safety Analysis
- Vast experience in all kinds of electrical equipment maintenance, trouble shooting and repair works.
-Vast experience in overhauling of AC motors which includes replacement of bearings, rotor shaft, slip rings, carbon brush, end cover, terminal blocks, stator and rotor rewinding, Servicing of MV & LV circuit breakers of oil, air blast, vacuum and SF-6 type circuit breakers.
- Condition monitoring of electrical equipment through Engineers / Supervisors / Technicians and Contract agencies
- Planning and execution of day-to-day scheduled preventive, corrective maintenance and shutdown maintenance activities on electrical equipment through Engineers / Supervisors / Technicians and Contract agencies.
- Equipment spares planning and procurement through SAP.
- Documenting SOP, SMP, ISO 14001 and maintaining records.
- Implementing safety practices in consultation with Safety officer.
- Active participation in the HAZOP study and preparation of Job Safety Analysis
January 1993
To April 2005
Senior Engineer - Electrical
at DCW Ltd,
Location :
India - Chennai
- Responsible for operation and maintenance of HV/LV substations and all kinds of HV/MV/LV electrical equipments.
- Project expansion activities, Installation and commisiioning High voltage substation, Captive Power Plants, Switchgears, High Current Rectifiers and Rectifier transformers, Harmonic filter banks, MV & LV PCC’s & MCC’s, and all process related power & control equipments.
- Protective relays coordination & settings.
- Executing works through engineers/ Supervisors/ Technicians/ Contract agencies.
- To prepare the schedule of maintenance activities and to follow the maintenance activities as per schedule.
- Follows up to ensure all activities are carried out in a safe and high technical standard, timely, efficient and cost effective manner to maximize plant availability to meet production targets.
- Investigate chronic maintenance problems by reviewing and analyzing reliable plant and equipment maintenance data.
- Recommends appropriate solution to prevent recurrence
- To provide technical advice and support to subordinates for diagnosing the fault and repairs.
- Equipment spares planning and procurement .
- Documenting SOP, SMP, ISO 14001 and maintaining records.
- Implementing safety practices in consultation with Safety officer.
- Project expansion activities, Installation and commisiioning High voltage substation, Captive Power Plants, Switchgears, High Current Rectifiers and Rectifier transformers, Harmonic filter banks, MV & LV PCC’s & MCC’s, and all process related power & control equipments.
- Protective relays coordination & settings.
- Executing works through engineers/ Supervisors/ Technicians/ Contract agencies.
- To prepare the schedule of maintenance activities and to follow the maintenance activities as per schedule.
- Follows up to ensure all activities are carried out in a safe and high technical standard, timely, efficient and cost effective manner to maximize plant availability to meet production targets.
- Investigate chronic maintenance problems by reviewing and analyzing reliable plant and equipment maintenance data.
- Recommends appropriate solution to prevent recurrence
- To provide technical advice and support to subordinates for diagnosing the fault and repairs.
- Equipment spares planning and procurement .
- Documenting SOP, SMP, ISO 14001 and maintaining records.
- Implementing safety practices in consultation with Safety officer.
March 1991
To January 1993
Electrical Engineer
at Sankar Spinning Mills
Location :
India - Chennai
- Responsible for operation and maintenance of HV/LV substations and all kinds of HV/LV electrical equipments.
- Executing works through Supervisors/Technicians/Contract agencies.
- Liaison job with electrical inspector and government electricity board.
- Equipment spares planning and procurement .
- Executing works through Supervisors/Technicians/Contract agencies.
- Liaison job with electrical inspector and government electricity board.
- Equipment spares planning and procurement .
January 1986
To February 1989
Site Engineer
at Best & Crompton
Location :
India - Chennai
Site in charge for materials receiving, checking and certifying, Installation, testing and commisiioning of HV / LV substations, DG's, Switchgears and its related Electrical equipments.
Share on Facebook
Share on Twitter
Share Via Email