نورمان Reyes

• Operates and handles Coordinate Measuring Machines (CMM) like CMM Matrix Machine using Camio software, 3D Master Gauge using Verisurf X software, Faro Arm, Hexagon Arm/Scanner & OGP machine.
• Create program on Hexagon Arm/Scanner Machine and Faro Arm Machine.
• Receives raw materials and conducts testing using OGP Machine.
• Conducts Process Audit as per monthly plan
• Updates daily Quarantined and Rejects tracker
• Ensures that operator follows Quality Inspection Instruction by conducting cell to cell production.
• Records observations as to the conformance and non - conformance to specifications by comparing inspection data against customer specifications in the drawing.
• Conducts final inspection of the finished part ready for shipment and ensure that all boxes are loaded with QC Passed mark on it.
• Collects data for capability studies and inputs the same to generate report and submits to the Quality Supervisor for review and analysis.
• Conducts routine patrol inspection every 2 hours or as prescribed in the Control Plan
• Conducts visual inspection of incoming aluminum profile for defects such as scratches, dents, etc. and checks for the straightness of the profile with its length measured using the measuring tape.
• Conducts patrol work on floor such us visuals and measurements on under process products.
• Monitors closely occurrence of the product in the production line.
• Generates work inspection instruction.

• Check glass transition (Tg) for every start-up of product.
• Familiar with all production manuals issued by the management and understanding the techniques of pultrusion industrial operation of the production machinery.
• Mixing of resins to given formulations using the computer system.
• Checking on the threading dies as required for producing profiles according to the production specifications.
• Regularly monitoring profiles for diameter, surface finish, length, and other relevant specifications and completing tolerances sheets.
• Inspecting, marking and bundling of product and systems in all areas of production.
• Discuss and raise solutions to Quality Manager regarding any improvements production processes and procedures.
• Striving for excellence and quality of product and systems in all areas of production.

• Responsible to efficiently and safely load and offload from aircraft
• Build up baggage in make-up or transfer areas
• Deliver baggage into arrivals hall
• Efficiently and safely handle all customer baggage
• Handle the task of transporting goods to and from the ramp to the destination
• Observed safe ground handling procedures and maintenance of ground handling equipment,
including the performance of equipment checks.
• Communicated constantly with Flight Crew personnel and other ground personnel.
• Complied with all safety procedures and station policies.
• Read luggage labels and follow lists to make sure baggage goes to the right place.
• Check for any priority baggage and assign all baggage to the correct baggage carousel.

• Operate and handles Coordinate Measuring Machines (CMM) like CMM Matrix Machine using Camio software, 3D Master Gauge using VerisurfX software, Faro Arm & OGP machine.
• Conducts first off testing on every materials that has been under process on every machines
• Detected product’s faults and suggested necessary changes.
• Ensures that operator follows Quality Inspection Instruction by conducting cell to cell production.
• Records observations as to the conformance and non-conformance to specifications by comparing inspection data against customer specifications in the drawing.
• Conducts final inspection of the finished part ready for shipment and ensure that all boxes are loaded with QC Passed mark on it.
• Collects data for capability studies and inputs the same to generate report and submits to the Quality Supervisor for review and analysis.
• Conducts routine patrol inspection every 2 hours or as prescribed in the Control Plan
• Conducts visual inspection of incoming aluminum profile for defects such as scratches, dents, etc. and checks for the straightness of the profile with its length measured using the measuring tape.
• Conducts patrol work on floor such us visuals and measurements on under process products.
• Makes capability study on new products.
• Monitor closely occurrence of the product in the production line.
• Generate work inspection instruction.
• Validate corrective action for production improvement process.
• Receiving raw materials and conducts testing using OGP Machine.
• Performs other task as may be assigned by the immediate superior.

·Starts machines, monitor their operations and record operation data
·Makes adjustment to the Machines if necessary
·Observes operations to detect malfunction of the Machine
·Read work orders and production schedules to determine specification such as location of cutting lines and dimensions
·Turn controls to set cutting speed, feed rates, and table angles for specified operations
·Complete work requests
·Help with other related tasks
·Performs other task that may be assigned

• Ensure implementation of quality standards and control, lab testing and documentation
• Conducts testing on all incoming raw materials to assure it conforms to the requirements needed
• Coordinates with the production people for every machine setup
• Analyzes and makes intensive studies on the prevention of the recurrence of non-conformities and implements corrective measures when necessary
• Checking from time to time on-process and finished products to avoid non-conformities and take samples for testing
• Provides product test results and certificates and answers to customer queries.
• Acting production supervisor in the absence of production supervisor.
• To maintain quality records these records should be presented in the agreed format upon contract completion
• For liaising with the contractor’s QA/QC personnel for coordination and witnessing tests as specified in the inspection and tests plan and will ensure that the appropriate test reports and records are made available when required
• Reports directly to the Q/A Supervisor and carries out orders within the policies and procedures established. Responsible for submitting daily test report to senior
• Testing products and prototypes
• Preparing reports and proposals for the changes in the products
• Performed durability and performance test of products
• Detected product’s faults and suggested necessary changes
• Prepared test reports and submitted it to senior technician
• Tested products to ensure that the product meet the customer need
• Prepared test reports and maintained customer feedback
• Implemented quality planning for effective working