Senior Electrical Engineer
CEM ESTERO S.P.A
Total years of experience :12 years, 4 Months
•Preparation of electrical design and calculation (Lighting, Power and Special System) based from IFC drawings.
•Ensure that all information applied in the design is based from the latest IFC drawings and accordance with the standard and company specifications.
•Supervised the preparation of coordination drawings between Mechanical and Electrical Design.
•Conduct site survey to make sure that proposed design will not interfere with the existing installation.
•Attend weekly coordination meeting with client to discuss issues that may arise in accordance with the proposed design.
•Prepare response to the Technical Query of sub-contractor.
Position: Senior Electrical Engineer
(Design/Const./Commissioning)
Date: Nov. 2010 to July 2012
Company: Astaldi Arabia Ltd. (Head Ofc.-Riyadh)
P.O.Box 99974 Riyadh 11625
Kingdom of Saudi Arabia
Tel. +966-1-4631199, Fax No. +966-1-4641512
Project: Jubail Export Refinery - Package 2A Project
Location: Jubail Industrial City, Kingdom of Saudi Arabia
Owner: Saudi Aramco Total Refining and Petrochemical Co.
(SATORP)
Contractor: Technip Saudi Arabia Company Limited (TPSA)
Duties & Responsibilities: • In-charged in the preparation of HVAC System Drawings (Power & Control Layout, Duct & Instrument One Line Diagram, etc.)
• In-charge for the material submittals for all electrical installations.
• Preparation of method statements for construction, commissioning & energization of Electrical Works.
• In-charge for the take-off of materials required at site as per
approved drawings.
• Supervised the installation of all electrical works in accordance with the approved drawings and company standards.
• In-charged in the pre-commissioning and commissioning of HVAC
System. As well as coordination with the vendor system engineer of
HVAC Controls (Honeywell) . Verify that the system shall be as per
approved sequence of operation.
• During the absence of our Electrical Manager, I was appointed to delegate the construction work from site meetings, correspondence and progress of work.
Position: Senior Electrical Engineer
(Design/Const./Commissioning)
Date: Nov. 2010 to July 2012
Company: Astaldi Arabia Ltd. (Head Ofc.-Riyadh)
P.O.Box 99974 Riyadh 11625
Kingdom of Saudi Arabia
Tel. +966-1-4631199, Fax No. +966-1-4641512
Project: Jubail Export Refinery - Package 2A Project
Location: Jubail Industrial City, Kingdom of Saudi Arabia
Owner: Saudi Aramco Total Refining and Petrochemical Co.
(SATORP)
Contractor: Technip Saudi Arabia Company Limited (TPSA)
Duties & Responsibilities: • In-charged in the preparation of HVAC System Drawings (Power & Control Layout, Duct & Instrument One Line Diagram, etc.)
• In-charge for the material submittals for all electrical installations.
• Preparation of method statements for construction, commissioning & energization of Electrical Works.
• In-charge for the take-off of materials required at site as per
approved drawings.
• Supervised the installation of all electrical works in accordance with the approved drawings and company standards.
• In-charged in the pre-commissioning and commissioning of HVAC
System. As well as coordination with the vendor system engineer of
HVAC Controls (Honeywell) . Verify that the system shall be as per
approved sequence of operation.
• During the absence of our Electrical Manager, I was appointed to delegate the construction work from site meetings, correspondence and progress of work.
Position: Sr. Electrical Engineer
Date: April 2008 to January 2010
Company: Astaldi Arabia Ltd.
P.O. Box 23105, Doha
State of Qatar
Tel. No. +974-4554703, Fax No. +974-4554758
Project: Qatar Aluminum (Qatalum) Project, Qatar
Owner: Qatar Petroleum / Hydro
Contractor: SNC Lavalin Inc.
Duties & Responsibilities: § Preparation of design for HVAC Instrument & Power System. (e.g.
Selection of Circuit Breakers, Protection Relays, Selection & Sizing of
Power & Control Cables, Cable Tray Routing, Selection of Instruments according to client specification)
§ Preparation of Bill of Quantities for HVAC System for procurement
purposes.
§ Supervision of HVAC Instrument installation according to the latest
approved construction drawing.
§ Conduct commissioning for HVAC System together with the vendor of control unit (e.g. Honeywell)
§ Conduct commissioning for Air Cooled Condensing Units and Split
Units (e.g. Trane, York)
Position: Electrical Engineer
Date: June 2006 to March 2008
Company: Astaldi Arabia Ltd.
P.O. Box 23105, Doha
State of Qatar
Tel. No. +974-4620315, Fax No. +974-4620317
Project: RL (3) Common Off Plot Projects, Qatar
Owner: RasGas Company Ltd.
Contractor: Fluor Mideast Ltd.
Duties & Responsibilities: § Preparation of design for HVAC Instrument & Power System. (e.g.
Selection of Circuit Breakers, Protection Relays, Selection & Sizing of
Power & Control Cables, Cable Tray Routing, Selection of Instruments according to client specification)
§ Revised drawing for re-submittal according to the comment/s of the
client/consultant.
§ Conduct quantity take-off based on the approved drawing for procurement
use.
§ Do material submittal as per approved vendor/manufacturer list or as per
required in the specification.
§ Coordinate with Site Supervisors & Foremen regarding the installation of works to make sure that it is in accordance with the drawing, standards and specification of the client.
§ Conduct quality control inspection for client's acceptance from the arrival of material up to the installation work.
§ Discuss with client regarding the progress of construction work.
§ Assigned for the commissioning and start-up of the system prior to hand- over the system to the client. Conduct commissioning for HVAC System
together with the vendor of control unit (e.g. Johnson Controls)
§ Conduct commissioning for Air Cooled Condensing Units and Close
Control Units (e.g. Trane, Liebert)
Position: Jr. Design Engineer/Supervisor
Date: Nov. 2003 to May 2006
Company: Astaldi Arabia Ltd.
P.O. Box 23105, Doha
State of Qatar
Tel. No. +974-4620315, Fax No. +974-4620317
Project: Oryx Gas to Liquid (GTL) Project, Qatar
Owner: Oryx-Sasol Joint Venture
Contractor: Technip Italy
Duties & Responsibilities: § Preparation of design such as cable routing, sizing of raceways (cable tray & conduits) Public Address, Structured Cabling (, Access Control, Fire & Gas
Detection System and HVAC Instrumentation in accordance with the client's
specification and international standards.
§ Preparation of bill of materials & estimates.
§ Coordinate with various vendors for the requirement and completion of the project.
§ Preparation of material submittal for client's approval in accordance with their
approved vendor/manufacturer list or materials that can meet the client's
specification.
§ Do coordination meeting with other discipline and discuss some matter that
can affect the design.
§ Involve in the commissioning of the project particularly in the Fire & Gas
Detection System.
§ Assigned for the commissioning and start-up of the system prior to hand- over the system to the client. Conduct commissioning for HVAC System
together with the vendor of control unit (e.g. Johnson Controls)
§ Conduct commissioning for Air Cooled Condensing Units and Screw Type
Chillers (e.g. McQuay)
Position: Quantity Surveyor (Electrical)
Date: July 2001 to October 2002
Company: IMPREGILO S.p.A.
P.O. Box 64051, Riyadh 11536,
Kingdom of Saudi Arabia
Tel. No. 01-464-0446 / 465-3678
Project: Kingdom Center Project, K.S.A
Owner: Kingdom Holding Company
Consultant: Becthel / Omrania
Duties & Responsibilities: § Preparation of monthly evaluation certificate for the electrical works.
§ Preparation of substantiation report for the monthly evaluation certificate.
§ Discussed with the consultant the items claimed for the monthly evaluation.
§ Preparation of substantial report for variation order of electrical works.
Position: Staff Engineer / System Integrator
Date: July 1999 to March 2001/February 2003 to Oct. 2003
Company: ASB Electrical Inc.
Davao City, Philippines
Tel. No. +63-82-2211847
Duties & Responsibilities: § Preparation of bill of quantities for residential, commercial & industrial plans.
§ Preparation of design for electrical system such as lay-out, load schedule data,
single line diagram and sizing of circuit breakers, cables and conduits/cable
trays.
§ Supervision of electrical installations such as Lighting, Power, Telephone,
Data, Fire Alarm (Simplex), CATV and Grounding System
§ In-charge in the installation & commissioning of motor controls and soft
starters
§ Preparation of material submittal and related documents that required approval from the consultant
§ Preparation of operation and maintenance manual.
§ Preparation of as-built drawings
Bachelor of Science in Electrical Engineering (B.S.E.E.) University of Mindanao Davao City, Philippines October 1998 Technical Education and Skills Development Authority Region XI, Davao City § Industrial Electricity (Motors & Motor Controls)