Abdulrahman ALhubaishi

• Lead the execution of a strategic roadmap for the Planning &
Control function, aligning departmental objectives and outputs
within the organizational goals to drive long-term project success
and operational efficiency.
• Supervise and control all the department functions to lead the
planning and control department to flawless progressing by the
continuous enhancement and all aspect improvements.
• Develop and track key performance indicators (KPIs) to evaluate
the effectiveness of project management processes and drive
continuous improvement for the project delivery with
approaching different solution for the stakeholders to avoid
projects delay.
• Lead the evaluation process for current completed projects to
identify the lessons learned and mitigate the risk and failure
modes to integrate improvements into current and future
projects to enhance overall project management practices.
• Monitor and control the units budgets by tracking expenditures,
identifying cost-saving opportunities, and making necessary
adjustments to ensure financial accountability and resource
optimization.
• Regularly report to senior management on project progress,
highlighting key achievements and areas for improvement to
support informed decision-making.

Oversee the planning, design, and execution of technical
projects, ensuring alignment with project goals, regulatory
compliance, optimal resource utilization, and high standards
of quality and scope of work compliance.
• Monitoring and ensuring the alignment of design detailing with
project goals and requirements by leading comprehensive design
assessments, ensuring all aspects meet project specifications and
regulatory requirements.
• Managing end customer expectations, handling complaints, and
delivering exceptional support experiences through
comprehensive coordination with internal and external
stakeholders.
• Developing and implementing engineering aspects with
considering technical support and permits policies, procedures,
and standards to ensure consistent service delivery.
• Leading the delivery of consistent technical support and
assessments during the business case preparation stage and after
initial approvals, guiding project teams to ensure technical
compliance with regulatory standards and best practices.
• Managing multiple priorities and projects simultaneously,
ensuring that resources are allocated effectively deadlines are
met.
• Managing critical incidents, including rapid response, escalation
management, communication, and post-incident analysis and
providing solutions accordingly
• Define clear performance expectations, provide regular
feedback, and conduct performance evaluations to ensure team
members achieve their engineering department objectives.

• Alahsa Hotel Existing Structural Assessment(Lead): Study of the
existing structural system for the Airport building to evaluate
structural adequacy using structural simulation modeling and
material test as supported evidence for decision making.
• Baggage handling system- Structural Assessment: Rehabilitate
the existing BHS with new in-kind, which requires a structural
evaluation reviews for the existing structural elements and
strengthening calculation for the extra loads on the existing
facility.Moreover, reviewing the design submittals which includes
the dismantling and the installation method of statement for the
Canopies (boarding-pass counters) as part of the DACO new design
theme.
• West Runway Pavement (Design Technical Lead): Review,
evaluate and verify the consultant design output as per the
Aviation standards of GACAR and ICAO and check the execution of
new run way pavement, markings and foundation is as per the
design acceptable limits.
• KFIA Hilton Hotel (PM): Review the proposed design for the all
design approaches, Architectural, structural and MEP including
the site facilities, also handling the coordination and
communication with the investor different parties to be complied
with the international and local codes as SBC, moreover, facilitate
the approaches of durability and sustainability in material and
techniques within the design submittals.
• KFIA Short term parking Repairing works (PM) : Coordinate with
the contractor to implement the best practice methodology as
recommended by the SBC, ACI and ASTM for the structural
/mechanical repairing works, moreover, upgrade the technology
systems for the overall facility.
• Economy, short term & Long term Parking (PM) : review the
engineering submittals to assure the compliance with the local
codes and best traffic practice from the schematic design phase
till the implementation phase.
• Energia Project: Review
statement other and
• DACO Annual capital and operation projects : Prepare the
Request for proposal for the technical requirements for the
proposed projects/services within different DACO
stakeholders/departments. Moreover, Monitoring the compliance
supervision consultants and construction contractors versus
DACOs procedures, process, and manual guidance or as per the
best practices regarding site works and quality.

• Jafurah piping manifolds &security perimeter : Designing
piping manifolds network for gas along Jafurah stations which
includes the mat foundation for the equipment and generators.
Moreover, design piping foundation for all supported elements.
Furthermore, design the security system for perimeter fencing
which is approximately 7.2 KM with supported security cameras
for each area.
• JGP Facility Security Systems : Design of RCC Buildings such as
security gate, government& support and admin buildings
, providing different fences and gates based on the security
consultant category and recommendations, moreover designing
different security site structures for Saudi Aramco.
• SASREF projects : Design different type of supports for different
structures and equipments with considering the existing
condition of these facilities to avoid any type on in consistency
with the U/G and O/G clashes .
• Install two Instrument Air Compressors at Uthmaniyah :
Demolish and design new foundation for air compressors,
electrical panel and the DCS building with considering the
existing site condition to avoid the clashes with the U/G utilities.
• Nesma Scaffolding Services Task : Review and design temporary
scaffolds for maintenance purposes for different type of facilities
and equipment which may reached approximately to 50m height
for vertical vessel tower scaffold, underhung scaffolding system
for an existing offshore pipe rack, bridge scaffold for an existing
building facades as well as an independent run. Moreover, duty
capability is varying from light, medium and heavy based on Saudi
Aramco safety Manuel guideline and Access scaffolding structural
design criteria .
• SATORP Rapid projects : Design new pipe support /sleepers, pipe
racks and equipment foundation for different tasks with
considering the existing condition of these facilities to avoid any
type on in consistency with the U/G and O/G clashes .

• Water Handling Debottlenecking at South Ghawar Area
Uthmaniyah & Hawiyah (2019-2020): Design of Pipe racks,
pipe Support, platforms and several equipment foundations
for Saudi Aramco .
• Structural Design for Sand Drying & Screening System (Lead) :
Foundations design for Bulk Silos, intermediate silos and several
structural elements for Adwan Chemical Industries.
• Fuel Station (R&D) - Dhahran (Lead) : Structural Design of multi
service fuel station and its underground utilities which to be the
future prototype of Saudi Aramco fuel stations.
• Khurais Rapid Project : Rehabilitation works for the element
were affected by the strike which includes the construction
method statement as well as the replacement works with the
subcontractors .
• Durrah Sugar Refinery Utilities Connection Project (Lead):
Design of gas line in the RC corridor which includes multi
structures as : Pipe supports, platforms and several equipment
foundations for Saudi Aramco.
• Fire Truck access road up-scope at Khurais Aramco Residential
(2019): Design fire truck access, and Infrastructure utilities
protection for Saudi Aramco.
• Marjan Increment Program - Tanajib : Design of RCC and steel
Buildings such as security office buildings, government building,
admin building, different site structures and underground
utilities for Saudi Aramco.

• Prepares and reviews comprehensive engineering documents, design drawings, and calculations to ensure accuracy and compliance.

• Develops material and equipment specifications that meet project requirements and industry standards.

• Executes both basic and detailed engineering tasks, enhancing project efficiency and effectiveness.

• Collaborates with multidisciplinary engineering teams to ensure seamless implementation of design concepts.

• Utilizes advanced software tools for structural analysis and design, improving project delivery timelines.

• Demonstrates strong problem-solving skills by addressing design challenges and optimizing structural solutions.

• Committed to maintaining high-quality standards throughout all phases of engineering projects.

• Developed innovative structural solutions for educational, community, residential, and infrastructure projects.

• Collaborated with multidisciplinary teams to ensure project alignment with safety standards and regulations.

• Conducted thorough structural analysis and design, improving project efficiency and reducing costs.

• Utilized advanced software tools to create detailed models and simulations, enhancing project visualization.

• Engaged with stakeholders to gather requirements and provide technical expertise, fostering strong relationships.

• Contributed to the successful completion of projects on time and within budget, showcasing strong project management skills.

• Committed to sustainable design practices, promoting environmentally friendly solutions in all projects.