Qiamuddin خاجة, Site Engineer - Electrical

Qiamuddin خاجة

Site Engineer - Electrical

KEO International Consultants

البلد
الهند
التعليم
ماجستير, Electrical Power Engineering
الخبرات
18 years, 5 أشهر

مشاركة سيرتي الذاتية

حظر المستخدم


الخبرة العملية

مجموع سنوات الخبرة :18 years, 5 أشهر

Site Engineer - Electrical في KEO International Consultants
  • المملكة العربية السعودية - مكة المكرمة
  • أشغل هذه الوظيفة منذ أكتوبر 2015

KEO International Consultants, KSA

Site Engineer - Electrical, October 2015-Present
Mr. Khaja is currently working as Site Engineer - Electrical at King Abdul Aziz Road project in the PM / CM international Division for the construction Under pass / Under bridge / Flyover Lighting and Street Lighting, traffic Signaling, Metro Tunnel, Metro Stations, Mosque, Pedestrian walkway lighting, EHV/HV/MV/LV cabling, MEP works of Utility buildings.

RELEVANT PROJECT EXPERIENCE

Project works:
• Review and approve Method statements, ITP, Material Submittals, Prequalification Submittals, SAT and FAT Procedures and Formats.
• Review and approve the Shop Drawings.
• Inspect the materials delivered to site in line with the approved specifications.
• Conduct daily Site work Inspections.
• Prepare Weekly and Monthly site progress report for the client.
• Issue NCR for any non-compliance with regards Quality and safety.
• Issue Site instructions for any works that lack quality.

Electrical Engineer في Al Jaber and Partners
  • قطر - الدوحة
  • مايو 2007 إلى سبتمبر 2015

Al Jaber Transport and General Contracting, Doha, Qatar
Electrical Project Engineer, July 2012 - September 2015
Worked at Al Muntazah Street extension project Package 13 for the construction of 2 Nos of Power Gallery, 6 Nos of 11/0.415kV Substations, 7 Nos of Pumping Stations, 220kV/132kV/66kV/11kV underground cable diversion works, 11kV/LV cable networks, Under pass / Under bridge / Tunnel Lighting and Street Lighting, traffic Signaling, Intelligent traffic system (Client: Ashghal, Consultant: Parsons).
Manpower Handled: 232 Workers including Engineers, Supervisors, Technicians, labours and Subcontractors.

Al Jaber and Partners, Doha, Qatar
Electrical Section Engineer, May 2008 - June 2012
Worked at Lusail Infrastructure Development Project CP-2 for the erection of 2 nos of 66/11kV GIS substations, 31 Nos of 11/0.415kV Distribution substations and its cable network (EHV, HV, MV & LV), Under pass / Under bridge Lighting and Street Lighting, traffic signaling, (Client: Qatari Diar, Consultant: Parsons and Halcrow).
Manpower Handled: 197 Workers including Engineers, Supervisors, Technicians, labours and Subcontractors.

Al Jaber and Partners, Doha, Qatar
Electrical Site Engineer, May 2007 - April 2008
Worked at Pearl Village for Qatar Shell Gas to Liquid (QSGTL). The scope of works includes the Design, Supply, Installation, Testing and Commissioning of the site wide utility services for the Pearl Village within 170 hectare area, which includes Road Lightings and accommodation unit’s Electrical Supply from RMU’s to MDB’s and to accommodation DB’s of the QSGTL camp to serve 35, 000 personnel.
o In charge on the Design, Supply, and installation of a 3, 000 personnel camp’s which includes Road Lighting and complete Electrical System from Diesel Generators to generator room synchronizing panel and to SMDB and to DB’s of accommodation.
Manpower Handled: 129 Workers including Engineers, Supervisors, Technicians, labours.
Project works:
•Check / review Contractor's shop drawings for all electrical services / works, including services composite drawings with special emphasis on coordination with all the civil, structural, architectural works / finishes of the project including compliance with all the regulatory requirements.
•Implement the contract documents, such as design drawings, specifications, Bill of Quantities, contract conditions, etc. on site.
•Prepare and forward to procurement department - material purchase requisitions for all items well in advance to ensure timely delivery of materials to site.
•Prepare, check, review / approve all the electrical materials submittals, SAT and FAT procedures, proposals and samples.
•Prepare and Submit Method statements.
•Inspect all the electrical materials delivered to project site for compliance as per approved materials data / samples.
•Check quality of electrical works for full compliance with the contract Specification requirements and approvals.
•Issue NCRs as may be applicable.
•Review and approve the As Built drawings
•Review / check and recommend the acceptable completed progress percentages of all electrical activities to the client for Contractor's Monthly Payment Applications.
•Attend regular progress meetings / technical coordination meetings with clients, consultants, contractors, suppliers, etc.
•Regularly coordinate and follow-up with consultant for all technical and contractual issued related to any submittals (such as Shop Drawings, Material Submittals, Method Statements, Calculations, FAT and SAT procedures, ITP’s inspection notices, Subcontractor / supplier prequalification’s and Reports) ensuring timely approval to avoid any delay to the project.
•Prepare and submit to project planner - weekly progress updates and monthly look aheads.
•Prepare and submit monthly progress invoices with all supporting documents to the Consultant / Client and to review with them ensuring its approval.

Field Engineer في HACO Electrical Contractors
  • الهند
  • مايو 2003 إلى أغسطس 2004

 Worked as an Electrical Field Engineer at HACO Electrical contractors from May 2003-June 2004, handling installation of 33/11kV substation which includes;

o 33kV Switchgear.
o 11kV Switchgear.
o 33kV, 11kV AB Switches.
o Power Transformers of 8MVA capacity.
o 33/11kV Bus.
o HV Control Breakers including Group control and individual control (OCB, VCB).
o LV Control Breakers.
o Substation Control System.
o 220V DC Battery system.
o Earthing system.

الخلفية التعليمية

ماجستير, Electrical Power Engineering
  • في Jawaharlal Nehru Technological University
  • أبريل 2007

I have done my Masters in Electrical Power Engineering with a GPA of 3.7(83.5%). I have done my project at masters level on "Network Reconfiguration for enhancement of Voltage Stability using ANN" in which I got Excellent award form the dean of Osmania University.

بكالوريوس, Electrical and Electronics Engineering
  • في Osmania University
  • أبريل 2003

I have done my Bachelor in Engineering with a GPA of 3.5(72.5%), and from then I have been working in one of the most leading company in India.

Specialties & Skills

Installation
Procurement
Utilization
Power Engineering
AutoCAD, Primavera, PLC, SCADA, PC Schematic,
Preparing Coordinated drawings, reviewing Subcontractor offers and preparing contracts.

اللغات

الانجليزية
متمرّس

العضويات

IEEE
  • Student Menmber
  • April 2005