Robin Reyes, Sr. Planning Engineer

Robin Reyes

Sr. Planning Engineer

KEO International Consultants - Qatar

Location
Qatar - Doha
Education
Bachelor's degree, BS Civil Engineering
Experience
26 years, 0 Months

Share My Profile

Block User


Work Experience

Total years of experience :26 years, 0 Months

Sr. Planning Engineer at KEO International Consultants - Qatar
  • Qatar - Doha
  • My current job since July 2020

- Supervising project planning and control of Local Roads and Drainage projects.
- Manages the Project Master Program and report the progress to the Client and Management
- Achieved Client’s approval for the assessment of Contractor's EOT Claim twice.
- Collaborates with a group of eight (8) Sr. Planning Engineers with other projects in the development of Monthly Reports to the client.
- Develops the Project Risk Register and report on the Risk to respective Stakeholders

Sr. Planning Engineer at Public Works Authority
  • Qatar - Doha
  • February 2019 to June 2020

- Managed four (4) Internal Highway Projects for Planning and control.
- Supported the Supervision Consultants' Planning Engineers with regards to Planning and Control requirements of PWA
- Administered the Project Master Program and reported the progress to the Client and Management

Program Planner at CDM Smith
  • Qatar - Doha
  • February 2017 to December 2018

- Supervised nine (9) Flood Prevention Scheme simultaneously
- Drainage projects Planning and Control simultaneously with five (5) Contractors.
- Generated the submissions of Weekly Progress Reports of nine (9) FPS projects for the client
- Drafted eight (8) Contractor’s Extension of Time Recommendation to the client.
- Achieved completion of FPS Scheme to the client. Expedited client approval of Qatar Parking Master Plan Baseline

Forensic Planning Engineer at DG Jones & Partners
  • Qatar - Doha
  • November 2016 to February 2017

- Performed both retrospective and prospective types of analysis.
- Drafted and delivered construction delay analysis reports for clients, from determining cause and effect to report writing substantiated by supporting documents and preparing delay analysis reports.
- Performed critical path analysis of schedules while determining the presence of concurrent delay & consequent disruption.
- Analyzed production rates and work cycles to demonstrate entitlement to EoT, drafting of claim, and negotiation strategy.
- Review and critique Construction Programs and updates.

Project Controls Specialist at Fluor Corporation
  • Qatar - Doha
  • December 2013 to October 2016

- Supported the Design Development, Tender of the Sharq Crossing Program (3-Bridges and Tunnel)
- Obtained approval of Level 3 Baseline Program in Primavera P6 from Concept Design, Procurement, Construction, and Maintenance.
- Lead a team of three (3) planners in the development of the Level-3 Baseline Program
- Generated performance reports and dashboards

Senior Planning Engineer at Rider Levett Bucknall
  • Qatar - Doha
  • September 2012 to December 2013

- Developed delay analysis using Primavera P6 and determined the time impact for each delay event for an infrastructure project in Lusail

Planning Engineer at Taisei Corporation - TAV Construction
  • Qatar - Doha
  • August 2009 to September 2012

- Coordinated construction activities with all relevant parties for the airport project and implemented them in the Baseline.
- Aided the Planning and Controls Department in developing the Baseline Program in Primavera P3.
- Developed of Extension of Time submission.
- Guided a team of three (3) junior Engineers in the development of cases for Extension of Time

Planning Engineer at Pumyang Construction Co. Inc.
  • United Arab Emirates - Dubai
  • July 2008 to April 2009

- Produced a Baseline program in Primavera P3 for the construction of a 20-story building.
- Documented Daily Progress Report for clients' information

Planning Engineer at Vinci Construction Grands Projets
  • France
  • March 2007 to January 2008

- Monitored the progress of Works for client's information using Primavera P3

Quantity Surveyor at ACS Philippines Inc.
  • Philippines
  • July 2006 to February 2007

- Implemented, delegated, and scheduled estimating works for project completion.
- Conducted coordination meetings, as required by the project.
- Prepared and encoded necessary estimating requirements, documents, et al. necessary for the completion of the project.
- Coordinated and corresponds with the client and supervisors.
- Conducted accuracy and quality control, monitored work progress, and evaluated it upon completion.
- Implemented and developed operational procedures to facilitate and enhance work.

Estimator, Quantity Surveyor at Makati Development Corporation
  • Philippines
  • May 2002 to July 2006

- Streamlined the Estimating Spreadsheet in preparation for submission of Bids.
- Estimated Cost and Quantity for preparing Bill of Quantity for a Bid.
- Supervised a team of four (4) Estimators in bid preparation.
- Administered variance program and assisted in the change management effort in a timely fashion

Planning Engineer at L&M Maxco Company Inc.
  • Philippines
  • July 2000 to December 2001

- Generated a construction baseline schedule in Primavera P3 for a renovation of the existing mall.
- Recorded Construction progress and documented it in the baseline update

Scheduling Engineer at SKI-KG Joint Venture
  • Philippines
  • February 2000 to July 2000

- Generated a construction baseline schedule in Primavera P3 for a renovation of the existing mall.
- Recorded Construction progress and documented it in the baseline update

Engineering Assistant at Puyat Vinyl Products Inc.
  • Philippines
  • July 1999 to February 2000

- Reporting to the VP in Engineering, providing assistants in all the dealings with suppliers, clients, and the Management

Estimator at DM Consunji Inc.
  • Philippines
  • November 1996 to February 1999

- Analyzed project scope documents to create accurate project cost estimates.
- Facilitated the review and assessment of Subcontractors' Payments.
- Adopted the company's policy on Office Engineering

Education

Bachelor's degree, BS Civil Engineering
  • at University of the East
  • May 1996

Dean's Lister - 4 semesters

Specialties & Skills

Cost Engineering
Quantity Surveying
Construction Estimating
Construction Monitoring
Schedule Planning
MS Office Softwares
Primavera Project Planner - P6.8
AutoCAD 2009
Cost Estimation
Claims Analysis

Languages

English
Intermediate

Memberships

AACE International
  • Member
  • July 2012
Project Management Institute
  • Member
  • June 2013

Training and Certifications

Certified Planning & Scheduling Professional (PSP) (Certificate)
Date Attended:
January 2013
Valid Until:
January 2025
Certified Project Management Professional (PMP) (Certificate)
Date Attended:
October 2015
Valid Until:
October 2024
PMI-Risk Management Professional (Certificate)
Date Attended:
November 2022
Valid Until:
November 2025

Hobbies

  • Music & Fitness