رولاند Ortega

-prepared method statement for ELV System
-Coordination to the main contractor for materials submittals and methodology
-follow up to the supplier for the materials delivery on site
-Prepared daily site working progress
-set up the meeting for materials supplier, main contractor & consultant
-Supervising the site works to ensure that all Activities shall be as per project specification.
-witness and supervised testing commissioning activities
-Overseeing the complete strip out and refurb of a client site.
-Dealing with any technical issues that may arise.
-Carrying out servicing and pre-planned maintenance electrical tasks.
-Ensuring that on site Health and Safety regulation are strictly adhered to.
-Supervising the works of Junior and newly qualified personnel.
-Conducting site surveys, audits and inspections.
-Organizing works schedules and maintaining workers’ timesheets.
-Undertaking hands on electrical (ELV) installation work.
-Making sure that safe working practices are maintain at all times.
-Making sure that works methods are sufficient to meet the project needs
-dialing with Client for site inspection approval

1. QAQC Plan: Prepare quality procedure, inspection and test plan checklist and documentation
2. Monitoring Site Progress and Conduct Free Inspection Prior for Submission of Request of Inspection Test Plan ( RFIT ) for Client Inspection Approval for electrical & ELV Activities whenever these are hold point or witness point
3. Field inspection for installation of the equipment/materials, documentation of field report, punch list for the complete works
4. Ensure that the materials receive during the construction phase are inspected for compliance to standards, code, specification and quality requirements
5. Materials quality control to make sure it conforms to the engineering standard, specification and codes
6. Supervision for the installation and testing fire alarm system, as per standard requirements
7. Inspection for the installation of electrical equipment such as motor controller, power lighting panels
8. in charge in all construction work specified in the approved plan
9. Site activities inspection and monitoring to ensure compliance with approved procedures, specification, industry standards and drawings
10. Ensure that measuring and testing the equipment are calibrated properly prior to use on test activity
11. Supervise the installation test and commissioning of the power distribution system HV/MV/LV transformer, switches, standby generators and other electrical equipment
12. Supervision for the installation and testing of the fire alarm system
13. Submit daily activity report, field clarification for any deviation and conflicts of the designed and issued for construction drawings
14. Supervision for the installation of conduit pipes, cable tray/trucking, cable pulling, wiring for the equipment’s (lighting, grounding and feeder line )
15. Witness for the testing and commissioning of the equipment included megger, hi potential and contract test, loof checking of the control connection and other required by the standards prior startup of the equipment and handed over to the end user
16. Issuance of NCR/SDR if non-compliance deviation from the standard for construction activities and materials
17. Review of site modification reports and work variation estimates
18. Ensure that project construction activities are constructed in accordance with the project specification and with quality systems
19. Maintain log registered and discuss discrepancies violation of the standards with section in charge and issue notification to the concerned contractor for corrective action as and when necessary
20. Follow up and rectify discrepancies notified for remedial action including documentation
21. Documented all testing activities and test report filed for record reference.

1. QAQC Plan: Prepare quality procedure, inspection and test plan checklist and documentation
2. Monitoring Site Progress and Conduct Free Inspection Prior for Submission of Request of Inspection Test Plan ( RFIT ) for Client Inspection Approval for electrical & ELV Activities whenever these are hold point or witness point
3. Field inspection for installation of the equipment/materials, documentation of field report, punch list for the complete works
4. Ensure that the materials receive during the construction phase are inspected for compliance to standards, code, specification and quality requirements
5. Materials quality control to make sure it conforms to the engineering standard, specification and codes
6. Supervision for the installation and testing fire alarm system, as per standard requirements
7. Inspection for the installation of electrical equipment such as motor controller, power lighting panels
8. in charge in all construction work specified in the approved plan
9. Site activities inspection and monitoring to ensure compliance with approved procedures, specification, industry standards and drawings
10. Ensure that measuring and testing the equipment are calibrated properly prior to use on test activity
11. Supervise the installation test and commissioning of the power distribution system HV/MV/LV transformer, switches, standby generators and other electrical equipment
12. Supervision for the installation and testing of the fire alarm system
13. Submit daily activity report, field clarification for any deviation and conflicts of the designed and issued for construction drawings
14. Supervision for the installation of conduit pipes, cable tray/trucking, cable pulling, wiring for the equipment’s (lighting, grounding and feeder line )
15. Witness for the testing and commissioning of the equipment included megger, hi potential and contract test, loof checking of the control connection and other required by the standards prior startup of the equipment and handed over to the end user
16. Issuance of NCR/SDR if non-compliance deviation from the standard for construction activities and materials
17. Review of site modification reports and work variation estimates
18. Ensure that project construction activities are constructed in accordance with the project specification and with quality systems
19. Maintain log registered and discuss discrepancies violation of the standards with section in charge and issue notification to the concerned contractor for corrective action as and when necessary
20. Follow up and rectify discrepancies notified for remedial action including documentation
21. Documented all testing activities and test report filed for record reference.

1. Responsible for the installation of the Electronics Equipment Repair or Replace
2. Responsible for the installation of CCTV Camera, Fire Alarm System, Access Control System, Audio Visual System, Public Address, TV Signal Amplifier
3. Maintenance and Repair the devices such as CCTV Camera, lighting control system, IP Telephony, Fire Alarm Systems, master Clock, Public Address ( PAVA), Access Control System (ACS) Audio visual System (AV), signal amplifier, gate barrier, piping, cabling.
4. Supervised building equipment installation, testing the operations prior to hand over or take over to the next contractor
5. Ability to identify, replace and explain the proper usage of electronic security equipment systems
6. Possess in-depth knowledge of schematics, wire diagram and interpretation of technical drawings
7. Inspects, repairs, performs electrical safety and preventative maintenance as required.
8. maintains electronic systems; provide Preventative Maintenance on a timely basis as required.
9. Maintains and generates records associated with actions performed within 24 hours of assignment completion.
10. Solve problems utilizing analytical thought process, which may involve multiple contracts.
11 In-depth knowledge of legal compliance, purchasing and quality control
12. Maintains work area in a neat and orderly fashion.
13. Conducts and maintains duties, personal appearance, interactions with fellow employees, staff, and customers in a professional manner.

• Conduct scanning cargoes and baggage’s, reading, analyzed, and identify the images objects appeared on the x-ray monitoring screen
• Conduct scanning cargoes and baggage’s, reading, analyzed, and identify the images objects appeared on the x-ray monitoring screen
• Identify prohibited dangerous goods, like drugs, bombs, explosive, flammable solid, flammable liquid, corrosive, radio active
• To conduct manual inspection to any suspected object that appeared on x-ray monitoring screen
• To ensure properly declaration of shipment accordingly to international air transportation association (IATA)
• To ensure properly packing and crating of shipment accordingly to international air transportation association (IATA)
• To ensure properly declaration of dangerous goods with supporting document such as materials safety data sheet (MSDS) per container items, boxes or crates with united nation (UN) packed list, identification and classification of dangerous goods sticker, then refer to cargo acceptance for proper handling
• Handling of interception illegal shipment and immediately coordinate to line of duty custom police and field security coordinator for proper disposition
• Conduct plan preventive monthly (PPM) maintenance/ calibration every end of the month