Manager Fire and Safety
Yunus textile Mills
Total years of experience :26 years, 5 Months
Fire and safety department
Trainer. Auditor. Consultant
• Transfer Theoretical knowledge on the international Defense standards
• Planning and executing practical drills.
• Development of curriculum for different CBRN courses
• Directs the soldiers how to utilize the CBRN equipment in the CBRN environment
• Coordinates the CBRN medical training aspects with Medical department
• Installation of Marine Systems onboard small crafts
• Planning and executing Harbor and Sea acceptance Trials
• Follows up with system operations, maintenance and ongoing defects to ensure that the delivery of services and their need have been met
• Development of engineering solutions through reverse engineering
•Provide training courses and mentor developing Technicians of the department and fleet units.
•Data Acquisition & Analysis of Vibration Signatures then prepare and issue reports related to equipment and breed recommendations.
•Advanced Oil Analysis and Breathing air test for CO2, CO, Oil etc. then prepare and issue reports related to equipment and generate recommendations.
•Carry out risk assessment of the work performed by various teams and recommend controls.
•Carry out Diesel Engine Inspections of Various Fleet Unit’s Main and Power Plant ICPEs as per Naval Standards.
•Carried out suitable and sufficient risk assessments of the Marine Engineering Department and implement control measures i.a.w. Policy.
•Carried out Implementation Audit of BR 2000(20) and PBR 138A Safety Manuals, and report generation of Nonconformities to admin authorities as third party.
•As Sea Riding instructor of Marine Eng. Department of PN Surface Fleet Ships, I persisted to ensure that,
oMaximize availability of machinery and equipment to ensure that sea training time is used effectively by guiding machinery to utilize and defect rectification.
oAchieve a high standard of effectiveness in machinery operation and the ability to maximize system and equipment availability under all conditions, including breakdowns and action damage through effective drill conduct planning and script writing.
oDemonstrate a high standard of organization and administration and to integrate the department fully into the Ship’s organization by carrying out table talk discussions and tool box talks before the evaluations.
oAchieve effective Damage Control, Firefighting, and Battle Damage Repair through following and implementing the relevant fire fighting and damage control techniques and publications.
oDevelop a critical eye of engineering standards, performance and drill standards to enable self-assessment and improvement beyond core-Operational Sea Training.
oEnsure that an effective professional and operational training organization is developed to maintain high standards and effectiveness on a continuing basis on departure from OST
•Generated weekly, mid operational sea training and final reports which depicts the critical, significant and minor weaknesses and by whom the responsibilities lies with.
•Measured performance analysis on continuous basis of the MESRIs and Ship Staff through analyzing daily observation and the work completion reports.
•Assessed training presentations on marine engineering department systems and made corrections after highlighting short comings.
•Deputy Management Representative (ISO 9001-2000) of the organization and completed certification, external (by BUREAU VERITAS) and internal audits. Completed several observations and ensure nonconformance not to be observed during external audits.
•Formulated SOPs and OST forms by consulting International Codes & Standards including DEFSTANS, MILSPEC, OEM Manuals/instructions, ASTM/API/ANSI/ASME which utilizing during operational sea training.
•Auditor of Marine Eng. Department of PN Surface Fleet Ships (Area of responsibility included Marine Eng. Admin, Trg., Operations, Firefighting and Safety) through implemented engineering policies, documents, directives and reviews.
•Generates agenda points for annual operation and material meetings regarding Fleet Surface unit’s side.
•Coordinator of Maintenance and Repair Activities of T-21 Warships for timely completion of all deliverables with planning and scheduling methods, such as CPM and PERT, project accountability etc.
•Arrange/plan annual Propulsion Power Assessment Trials and finally generate reports for repair and higher admin authorities.
•Supervise and coordinate the preparation of the project proposal/front-end engineering, including development and analysis of alternates.
•Analysis of various types of engineering data which received routinely, consist of repair activities, POL consumptions, training, exercises etc.
•Analysis of Technical Investigations on the failure of machinery.
•Attended BI-Annual safety Reviews and analysis safety occurrences generated by Fleet and shore units.
•Arrangements made for the independent, systematic and critical examination of the safety arrangement system to ensure all parts are working acceptably well.
•Assessed and forwarded 54 small and medium sized modifications and Alteration & Additions related to Ship’s reliability, safety and propulsion, for Execution to concern authorities.
•Technical review of Equipment Drawings / Engineering Documents relevant to AS & AS and modifications.
•Consulting International Codes & Standards including ISM/DEFSTAN/MILSPEC etc.
•Passage planning of PN Warships w.r.t Marine Engineering aspects for exercises/ operations and overseas deployments.
•Administrated Fleet Board Examination for routine promotions of the Fleet’s personal.
•Compilation of results and keeping record of the examination for future references.
•Propulsion Manager, to control all activities i.e. Preparedness of machinery, prearrangement of logistics, availability of personal, Preparedness of specific missions, taking charge of Ships control center in emergencies/machinery break downs.
•Analyst Gas Turbine, Diesel Engines and High Pressure air compressor performances on routines basis then generate defect reports to repair authorities for repair.
•Active monitor of safety and fire safety in marine engineering department through inspection, sampling, survey and tours to check conformance to policy/directive/publications
•Promoter of safety culture on onboard ship through clear commitment of command, communication of safety information, training, notice board, posters, toolbox talks, memos and hand books.
•Method devised to monitor and review the effectiveness of safety arrangements put into place.
•Accepting repaired machinery while taking post repair performance trials to confirm its restored standards.
•Refit Maintenance coordinator for Marine Engineering Department, where I ensured all deliverables meeting time line from ship staff.
•Full ownership of control and monitoring progress of project activities, in accordance with project schedule, for timely completion of assigned projects.
•To execute multiple engineering projects as Project Lead to ensure on time completion.
•Master Planer of Maintenance Management System (MMS), I controlled, monitored and planed all scheduled and unscheduled activities.
• Keeping record of all maintenance, performance of machinery, HRM related documentations and all incoming/outgoing communications of Marine Engineering Department from outer authorities.
•Ensured all directives, policies, defect acquaints, outcomes of safety reviews/Board of technical investigations/Board of investigations be implemented in smooth etiquettes.
•Regulate and supervise 60 x personnel of Marine Eng. Dept. while considering all HRM Tools.
•Supervise/conduct training of under command personnel in various facets of onboard Marine Engineering practices.
•Designed and executed many jobs related to improving Propulsion power plant and power generation & distribution plant safety.
•Took part in many maintenance activities for safe execution of jobs that could be taken up only when ship in refit (Maintenance Period)
•Safe supervision for precise riggings of heavy loads and cold/hot jobs.
•Mechanical Coordination for Pre-commissioning and Commissioning Activities.
•Custody and maintenance of all damage control and firefighting equipment on charge such as fixed (HPSW, CO2 *Drench, Foam Drench) and portable (Diesel Driven fire and de-flooding pumps, Fire extinguishers etc.).
•Ensured maintenance, integrity and operation of all material arrangements for the collective protection from fire damage and CBRN hazards, including, Watertight and gastight structure, fixtures and fittings Ventilation, filtration, air conditioning and smoke clearance systems, All fixed firefighting systems except those that are the responsibility of the others and Fixed pumping and salvage systems.
• Maintainer 1st and 2nd level PMS routines and performance monitor of Gas turbines, Diesel Generators, Air conditioning and Ventilation system, Chilled water circulation system for weapon cooling, High Pressure Air Compressor, Hydraulic systems (i.e. Hull hydraulic, Control able pitch propellers, Steering systems, stabilizers), desalination plants, steam generators and various auxiliaries.
• Carry out U x E, Dismantling, repair and installation of Gas turbines, diesel Gas turbines, Diesel Generators, Air conditioning and Ventilation system, Chilled water circulation system for weapon cooling, High Pressure Air Compressor, Hydraulic systems (i.e. Hull Hydraulic, Control able pitch propellers, Steering systems, stabilizers), Desalination plants, Steam Generators and various Auxiliaries Heat Exchangers, Large fuel filtration units.
• In full charge of Propulsion and Power Generation Plant to provide continuous propulsion and power.
• Coordinator Extended Maintenance Period and Defect Essential Docking of concerned section.
• Section Planer of Maintenance Management System (MMS), plan, control and execute level 1 routines.
National Examination Board of Occupational Health and Safety.
Institute of occupational health and safety
High-field Awarding Body for Compliance
3 and half year apprentice ship training in MARINE EMGINEERING subjects.
