Total Years of Experience: 6 Years, 4 Months
September 2014
To February 2019
QA QC Engineer
at SOLAS Marine Services
Location :
United Arab Emirates - Sharjah
NATURE OF DUTIES PERFORMED
Managing incoming material inspection, certificate review and compilation of certificates with respect to project specification, Inspection & Test plan, Quality plan, industrial standards & client requirements to establish the conformity and non- conformity in the product.
Have operational & technical knowledge on H2S Safety Shelter, SCBA/EEBD & ELSA with back plate sets donning, BA compressor, air quality test as per BS EN 12021, breathing air cascade system, gas & fire detection system, fire extinguishing & fire suppression system
Preparing the non-conformity reports with respect to rejected material after visual inspection & functional test, and ensure that corrective, preventive measures have been establish to avoid any recurrence in the product quality.
Preparing the ITP, ITR, method statement, commissioning procedures, and inspection report (dimensional check, painting inspection as per Saudi Aramco Standards (SAES-H-004), bolt torque, pressure test, and material registry) as per project specification, customer PO, applicable industrial standards for client review and approval.
Monitor the welding activities such as weld fit up, root pass, final visual welding to ensure the welds & weld repairs are in accordance with approved welding procedure (WPS/PQR) and international code of practice.
Perform the inspection activities on the assembled or integrated system in accordance with the approved drawing, project quality plan & client specification and issue the mechanical completion certificates in order to start the pre-commissioning and commissioning activities.
Design interpretation (Isometric, General arrangement, P & ID and welding symbols) and ensure that the assigned jobs are executed as per design and project schedule.
Apart from inspection activities, I had also commissioned Breathing Air cascade system, Helideck foam fire fighting system, HP CO2 fire extinguishing system, Clean agent fire suppression system, water sprinkler system etc.
Currently working on H2S capsule shelter as per ONGC specification and Capsule container shall be in compliance with DNV E273.
Our Principals are Scott Safety UK, USA, Bauer Compressors USA, Kidde, NK, Honeywell Analytics, Drager Safety, MSA, Federal Signal etc.
Managing incoming material inspection, certificate review and compilation of certificates with respect to project specification, Inspection & Test plan, Quality plan, industrial standards & client requirements to establish the conformity and non- conformity in the product.
Have operational & technical knowledge on H2S Safety Shelter, SCBA/EEBD & ELSA with back plate sets donning, BA compressor, air quality test as per BS EN 12021, breathing air cascade system, gas & fire detection system, fire extinguishing & fire suppression system
Preparing the non-conformity reports with respect to rejected material after visual inspection & functional test, and ensure that corrective, preventive measures have been establish to avoid any recurrence in the product quality.
Preparing the ITP, ITR, method statement, commissioning procedures, and inspection report (dimensional check, painting inspection as per Saudi Aramco Standards (SAES-H-004), bolt torque, pressure test, and material registry) as per project specification, customer PO, applicable industrial standards for client review and approval.
Monitor the welding activities such as weld fit up, root pass, final visual welding to ensure the welds & weld repairs are in accordance with approved welding procedure (WPS/PQR) and international code of practice.
Perform the inspection activities on the assembled or integrated system in accordance with the approved drawing, project quality plan & client specification and issue the mechanical completion certificates in order to start the pre-commissioning and commissioning activities.
Design interpretation (Isometric, General arrangement, P & ID and welding symbols) and ensure that the assigned jobs are executed as per design and project schedule.
Apart from inspection activities, I had also commissioned Breathing Air cascade system, Helideck foam fire fighting system, HP CO2 fire extinguishing system, Clean agent fire suppression system, water sprinkler system etc.
Currently working on H2S capsule shelter as per ONGC specification and Capsule container shall be in compliance with DNV E273.
Our Principals are Scott Safety UK, USA, Bauer Compressors USA, Kidde, NK, Honeywell Analytics, Drager Safety, MSA, Federal Signal etc.
August 2012
To May 2014
QC Engineer
at Bharath Heavy Electrical LTD-PSSR
Location :
India - Bengaluru
NATURE OF DUTIES PERFORMED:
To verify and prepare the Welding procedure specification (WPS) & PQR for various structural, piping fabrication jobs as per approved drawing and verify welder meets the PQR requirements.
Manage the incoming fabrication & equipment’s inspection, equipment calibration & fabrication tools inspection on daily basis.
Conduct the welder qualification test for every 6 months & maintain the welder qualification records.
Review or interpret the various NDT reports of Piping & structural fabrication & maintain all the related reports.
Carryout the hydrostatic testing for piping spools & pipelines as per approved procedures with clients.
Stage wise inspection of pump, compressor, engine installation inspection & dimensional checks, painting inspection, welding visual inspection as per approved procedures and design / project specification.
To comply company HSE, work permit, safe work execution procedure and strictly adhere to the company rules & regulations.
To verify and prepare the Welding procedure specification (WPS) & PQR for various structural, piping fabrication jobs as per approved drawing and verify welder meets the PQR requirements.
Manage the incoming fabrication & equipment’s inspection, equipment calibration & fabrication tools inspection on daily basis.
Conduct the welder qualification test for every 6 months & maintain the welder qualification records.
Review or interpret the various NDT reports of Piping & structural fabrication & maintain all the related reports.
Carryout the hydrostatic testing for piping spools & pipelines as per approved procedures with clients.
Stage wise inspection of pump, compressor, engine installation inspection & dimensional checks, painting inspection, welding visual inspection as per approved procedures and design / project specification.
To comply company HSE, work permit, safe work execution procedure and strictly adhere to the company rules & regulations.
QA/QC Engineer
at SOLAS Marine Services Co. LLC
Location :
United Arab Emirates
OF DUTIES PERFORMED
* Managing incoming material inspection, certificate review and compilation of certificates with respect to
project specification, Inspection & Test plan, Quality plan, industrial standards & client requirements to
establish the conformity and non- conformity in the product.
* Have operational & technical knowledge on H2S Safety Shelter, SCBA/EEBD & ELSA with back plate sets
donning, BA compressor, air quality test as per BS EN 12021, breathing air cascade system, gas & fire
detection system, fire extinguishing & fire suppression system
* Preparing the non-conformity reports with respect to rejected material after visual inspection &
functional test, and ensure that corrective, preventive measures have been establish to avoid any
recurrence in the product quality.
* Preparing the ITP, ITR, method statement, commissioning procedures, and inspection report (dimensional
check, painting inspection as per Saudi Aramco Standards (SAES-H-004), bolt torque, pressure test, and
material registry) as per project specification, customer PO, applicable industrial standards for client
review and approval.
* Monitor the welding activities such as weld fit up, root pass, final visual welding to ensure the welds &
weld repairs are in accordance with approved welding procedure (WPS/PQR) and international code of
practice.
* Perform the inspection activities on the assembled or integrated system in accordance with the approved
drawing, project quality plan & client specification and issue the mechanical completion certificates in
order to start the pre-commissioning and commissioning activities.
* Design interpretation (Isometric, General arrangement, P & ID and welding symbols) and ensure that the
assigned jobs are executed as per design and project schedule.
* Apart from inspection activities, I had also commissioned Breathing Air cascade system, Helideck foam fire
fighting system, HP CO2 fire extinguishing system, Clean agent fire suppression system, water sprinkler
system etc.
* Currently working on H2S capsule shelter as per ONGC specification and Capsule container shall be in
compliance with DNV E273.
* Our Principals are Scott Safety UK, USA, Bauer Compressors USA, Kidde, NK, Honeywell Analytics, Drager
Safety, MSA, Federal Signal etc.
MAJOR PROJECTS INVOLVED
* KARAN-SAUDI ARAMCO Well Head Plat form Fixed Breathing Air Cascade System as per NFPA 1989.
* ENSCO 140/141- Helideck Foam system, Helideck lighting, Helideck installation, & testing as per CAP 437
& CAAP 71
* SAGAR SAMRAT ONGC Conversation project- Water sprinkler system as per NFPA 13, Clean Agent Fire
Suppression System as per NFPA 2001, Galley Wet Chemical System.
* JINDAL PIONEER Project - Fixed High Pressure CO2 extinguishing system as per NFPA 12.
* Managing incoming material inspection, certificate review and compilation of certificates with respect to
project specification, Inspection & Test plan, Quality plan, industrial standards & client requirements to
establish the conformity and non- conformity in the product.
* Have operational & technical knowledge on H2S Safety Shelter, SCBA/EEBD & ELSA with back plate sets
donning, BA compressor, air quality test as per BS EN 12021, breathing air cascade system, gas & fire
detection system, fire extinguishing & fire suppression system
* Preparing the non-conformity reports with respect to rejected material after visual inspection &
functional test, and ensure that corrective, preventive measures have been establish to avoid any
recurrence in the product quality.
* Preparing the ITP, ITR, method statement, commissioning procedures, and inspection report (dimensional
check, painting inspection as per Saudi Aramco Standards (SAES-H-004), bolt torque, pressure test, and
material registry) as per project specification, customer PO, applicable industrial standards for client
review and approval.
* Monitor the welding activities such as weld fit up, root pass, final visual welding to ensure the welds &
weld repairs are in accordance with approved welding procedure (WPS/PQR) and international code of
practice.
* Perform the inspection activities on the assembled or integrated system in accordance with the approved
drawing, project quality plan & client specification and issue the mechanical completion certificates in
order to start the pre-commissioning and commissioning activities.
* Design interpretation (Isometric, General arrangement, P & ID and welding symbols) and ensure that the
assigned jobs are executed as per design and project schedule.
* Apart from inspection activities, I had also commissioned Breathing Air cascade system, Helideck foam fire
fighting system, HP CO2 fire extinguishing system, Clean agent fire suppression system, water sprinkler
system etc.
* Currently working on H2S capsule shelter as per ONGC specification and Capsule container shall be in
compliance with DNV E273.
* Our Principals are Scott Safety UK, USA, Bauer Compressors USA, Kidde, NK, Honeywell Analytics, Drager
Safety, MSA, Federal Signal etc.
MAJOR PROJECTS INVOLVED
* KARAN-SAUDI ARAMCO Well Head Plat form Fixed Breathing Air Cascade System as per NFPA 1989.
* ENSCO 140/141- Helideck Foam system, Helideck lighting, Helideck installation, & testing as per CAP 437
& CAAP 71
* SAGAR SAMRAT ONGC Conversation project- Water sprinkler system as per NFPA 13, Clean Agent Fire
Suppression System as per NFPA 2001, Galley Wet Chemical System.
* JINDAL PIONEER Project - Fixed High Pressure CO2 extinguishing system as per NFPA 12.
Share on Facebook
Share on Twitter
Share Via Email