Total Years of Experience: 35 Years, 7 Months
June 2014
To Present
Instructor
at Institute of Aviation & Technology
Location :
Pakistan - Lahore
• Conduct courses of Aerospace /Aviation Technology
• Instructing in lectures and laboratories for aviation maintenance courses, including General Aviation, Airframe, and Power plant.
• Participating in program and curriculum development, including faculty discussions on curriculum.
• Developing, revising and assessing courses in the discipline.
• Preparation of Syllabus.
• The preparation, updating and reconciliation of appropriate phase/course examination questions
• Scheduling and supervision of technical courses
• Keep training material technically accurate and overall quality to be maintained, update course material as required
• Conduct On-job-training classes (OJT)
• Instructing in lectures and laboratories for aviation maintenance courses, including General Aviation, Airframe, and Power plant.
• Participating in program and curriculum development, including faculty discussions on curriculum.
• Developing, revising and assessing courses in the discipline.
• Preparation of Syllabus.
• The preparation, updating and reconciliation of appropriate phase/course examination questions
• Scheduling and supervision of technical courses
• Keep training material technically accurate and overall quality to be maintained, update course material as required
• Conduct On-job-training classes (OJT)
March 2008
To December 2013
Foreman/Supervisor
at PAF
Location :
Pakistan - Rawalpindi
• ‘O’level maintenance (scheduled / unscheduled).
• Experience of Pre, Thru and Post flight inspections and fault isolation of CN-235A/C.
• Supervised up to 65 employees with responsibility for the repair and maintenance of multiple aircrafts.
• Maintained, updated and controlled an aircraft spare parts inventory of over $300K.
• Facilitate team meetings to discuss performance metrics and methods of achieving higher levels of service and reliability.
• Extensive Knowledge of the Methods and Techniques of Repairing, Maintaining, and Replacing Components.
• Towing, Marshaling, Refueling & De Fueling as per assigned mission.
• Skilled in Interpreting Technical Specifications effectively, both in written and verbal.
• Periodic maintenance experience of CN-235 A/C in all Phase inspection.
• CN-235A/C phase inspection experience as quality control evaluator.
• Repair and overhauling experience of ground support equipment of CN-235A/C.
• Repairing /overhauling experience of hydraulic / pneumatic components.
• Supervision of fault isolation of all pilot reported entries.
• Technical administration, management and security supervision.
• OJT Instructor for new Technicians Conduct coaching classes
• Utilize blueprints, SB’s, JG’s, Technical Manuals and Engineering/Schematic drawings.
• Co-ordinating Engineering activities and providing accurate briefings on progress to senior management.
• Experience of Pre, Thru and Post flight inspections and fault isolation of CN-235A/C.
• Supervised up to 65 employees with responsibility for the repair and maintenance of multiple aircrafts.
• Maintained, updated and controlled an aircraft spare parts inventory of over $300K.
• Facilitate team meetings to discuss performance metrics and methods of achieving higher levels of service and reliability.
• Extensive Knowledge of the Methods and Techniques of Repairing, Maintaining, and Replacing Components.
• Towing, Marshaling, Refueling & De Fueling as per assigned mission.
• Skilled in Interpreting Technical Specifications effectively, both in written and verbal.
• Periodic maintenance experience of CN-235 A/C in all Phase inspection.
• CN-235A/C phase inspection experience as quality control evaluator.
• Repair and overhauling experience of ground support equipment of CN-235A/C.
• Repairing /overhauling experience of hydraulic / pneumatic components.
• Supervision of fault isolation of all pilot reported entries.
• Technical administration, management and security supervision.
• OJT Instructor for new Technicians Conduct coaching classes
• Utilize blueprints, SB’s, JG’s, Technical Manuals and Engineering/Schematic drawings.
• Co-ordinating Engineering activities and providing accurate briefings on progress to senior management.
June 2005
To February 2008
Maintenance Controller
at Pakistan Air Force
Location :
Pakistan - Karachi
• Plan, organize, direct, and manage the maintenance and repairs of aircraft, aircraft components, and aviation support equipment.
• Direct and manage the scheduling of aircraft, aircraft components, and aviation support equipment inspections.
• Ensure all aircraft, aircraft components, and aviation support equipment maintenance data is collected and properly disseminated.
• Direct, monitor requisition, reception, and allocation of materials, tools, aircraft components, and aviation support equipment.
• Preparation of Aircraft, Engine and Ground Equipment States.
• Preparation of Aircraft Defect Reports, RCNS, Signals, MT Millage States & Meeting Schedules & Raising of URS, AORS.
• Technical Correspondence of Maintenance Control.
• Ensure Proper Documentation of TCTO/SBs, Accomplishment and Accessory Time Changes, Maintain TCTO/SBs Documents for Assigned Aircraft.
• Forecast Time Change Requirements.
• Supervise and control Maintenance Communications Transportation Systems.
• Coordinate Functional Check Flight Requirements with Appropriate Agencies.
• Handle distribution of all applicable forms and documents.
• Manage schedule and unscheduled maintenance and assure coordination of all maintenance requirements.
• Administer the operation of aircraft and coordination between Operations, Aircrew and Line Maintenance.
• Kept all Concerned Activities Inform of changes in Priorities, Plans and Schedules.
• Conduct of Familiarization and Continuation Training for Maintenance Control Personal.
• Develop, Maintain and Implement Section Procedural Check lists.
• To Monitor, evaluate, receipt, assess, and implement instructions that affect Maintenance Control
• Perform other related duties as directed.
• Direct and manage the scheduling of aircraft, aircraft components, and aviation support equipment inspections.
• Ensure all aircraft, aircraft components, and aviation support equipment maintenance data is collected and properly disseminated.
• Direct, monitor requisition, reception, and allocation of materials, tools, aircraft components, and aviation support equipment.
• Preparation of Aircraft, Engine and Ground Equipment States.
• Preparation of Aircraft Defect Reports, RCNS, Signals, MT Millage States & Meeting Schedules & Raising of URS, AORS.
• Technical Correspondence of Maintenance Control.
• Ensure Proper Documentation of TCTO/SBs, Accomplishment and Accessory Time Changes, Maintain TCTO/SBs Documents for Assigned Aircraft.
• Forecast Time Change Requirements.
• Supervise and control Maintenance Communications Transportation Systems.
• Coordinate Functional Check Flight Requirements with Appropriate Agencies.
• Handle distribution of all applicable forms and documents.
• Manage schedule and unscheduled maintenance and assure coordination of all maintenance requirements.
• Administer the operation of aircraft and coordination between Operations, Aircrew and Line Maintenance.
• Kept all Concerned Activities Inform of changes in Priorities, Plans and Schedules.
• Conduct of Familiarization and Continuation Training for Maintenance Control Personal.
• Develop, Maintain and Implement Section Procedural Check lists.
• To Monitor, evaluate, receipt, assess, and implement instructions that affect Maintenance Control
• Perform other related duties as directed.
February 1992
To June 2005
Airframe Technician/Supervisor
at PAKISTAN AIR FORCE
Location :
Pakistan - Karachi
• 1st & 2nd Line Maintenance of C-130 B, E & L-382B Models Aircraft.
• Extensive Knowledge of the Methods and Techniques of Repairing, Maintaining, and Replacing Aircraft Components.
• Supervise multiple jobs including aircraft inspection, removal, repair and re-installation of all Airframe, major mechanical components and sub-assemblies.
• Streamline and re-engineer workflows to maximize productivity.
• Skilled in Interpreting Technical Specifications effectively, both in written and verbal.
• Flight Controls, Hydraulic System, Fuel System, Bleed System, Air conditioning System, Pressurization System Steering System (Trouble Shooting, Removal / Installation of Components & Rigging).
• Removal & Installation of Landing gears, Ramp & Door, Major Assemblies and Verifies Correct System Operation.
• Environmental/Pressurization, Anti-icing System & Bleed air system.
• Maintenance & Operational use of Powered & Non Powered Ground support equipment
• Aircraft Towing, Marshaling, Refueling & De Fueling as per Assigned Mission.
• Ground crew duties with C-130 Aircraft( More than 1000 Flying Hours in C-130 A/C as a Maintenance Crew)
• Maintenance supervision, monitoring and coordination between all trades working on aircraft.
• Experience as a Quality inspector duties.
• Locates Fuel Leaks by visual Inspection or by removing Closure Panels and tracing Leaks using Standard Leak Detection Procedures.
• Conduct of Training / OJT for newly Posted Technicians and Maintenance of Training Records for Air frame Trade.
• Schedule and Unscheduled Inspection of Engine & Airframe Trade for any Damage / Hydraulic & Engine Oil Leak of C-130 Aircraft.
• Inspection of GTC/APU for proper Operation and Serviceability.
• Consultation and compliance of IPBs, TOs, SBs, TCTOs, OTIs and, JG’s as per job requirement.
• Familiarized with all types of Fires hazard and its extinguishing.
• Facilitate cross-functional teams with multiple departments, building consensus and support for positive change and shared goals
• Extensive Knowledge of the Methods and Techniques of Repairing, Maintaining, and Replacing Aircraft Components.
• Supervise multiple jobs including aircraft inspection, removal, repair and re-installation of all Airframe, major mechanical components and sub-assemblies.
• Streamline and re-engineer workflows to maximize productivity.
• Skilled in Interpreting Technical Specifications effectively, both in written and verbal.
• Flight Controls, Hydraulic System, Fuel System, Bleed System, Air conditioning System, Pressurization System Steering System (Trouble Shooting, Removal / Installation of Components & Rigging).
• Removal & Installation of Landing gears, Ramp & Door, Major Assemblies and Verifies Correct System Operation.
• Environmental/Pressurization, Anti-icing System & Bleed air system.
• Maintenance & Operational use of Powered & Non Powered Ground support equipment
• Aircraft Towing, Marshaling, Refueling & De Fueling as per Assigned Mission.
• Ground crew duties with C-130 Aircraft( More than 1000 Flying Hours in C-130 A/C as a Maintenance Crew)
• Maintenance supervision, monitoring and coordination between all trades working on aircraft.
• Experience as a Quality inspector duties.
• Locates Fuel Leaks by visual Inspection or by removing Closure Panels and tracing Leaks using Standard Leak Detection Procedures.
• Conduct of Training / OJT for newly Posted Technicians and Maintenance of Training Records for Air frame Trade.
• Schedule and Unscheduled Inspection of Engine & Airframe Trade for any Damage / Hydraulic & Engine Oil Leak of C-130 Aircraft.
• Inspection of GTC/APU for proper Operation and Serviceability.
• Consultation and compliance of IPBs, TOs, SBs, TCTOs, OTIs and, JG’s as per job requirement.
• Familiarized with all types of Fires hazard and its extinguishing.
• Facilitate cross-functional teams with multiple departments, building consensus and support for positive change and shared goals
Share on Facebook
Share on Twitter
Share Via Email