Senior Mechanical Engineer
Abv rock group
Total years of experience :15 years, 6 Months
• Implementation and supervision of Mechanical services and all related documents.
• Review shop drawings and solve clashes on site.
• Plans, schedules, conducts, and coordinates detailed phases of engineering work in the mechanical discipline of a project or staff group. Performs work that involves conventional engineering practice but may include complex features such as resolving conflicting design requirements, unsuitability of conventional materials and/or difficult coordination requirements.
• Plans, coordinates, or prepares equipment or work specifications, material requisition, technical bid evaluations and award recommendations.
• Coordinates engineering efforts in assigned areas between specialty and other engineering groups or disciplines, with the client, suppliers, and contractors and between other groups.
• Communicates technical issues and recommends solutions to Supervisor and/or project management.
• Facilitates technical discussions with third parties (clients, suppliers, regulators).
• Conducts reviews of vendor drawings, calculations and other documentation.
• Works on conceptual studies, designs, reports, or proposals.
• Coordinates and interfaces as directed with the day-to-day technical work of discipline engineers, specialists and designers.
• Prepares discipline estimates and work plans in accordance with project scope, schedule and budget.
• Supports the creation of a work environment, supported by leadership, which fosters openness, trust, communication, teamwork, empowerment, innovation, and satisfaction.
• Attendance of Technical meeting & progresses meeting with Consultant.
• Implementation of infra line for district cooling & heating networks
• Manage the site team (staff and non-staff)
• Testing and commissioning/ Project handing over for mechanical systems
• Assists in preparing cost estimates, quantity take-offs and staffing requirements for proposals, forecasts and change orders
- North project (neom) from 5/6/2018 up to now
- Responsibilities:
- Installation of infrea structure networks
- Production Manager of al Judi HVAC duct fabrication work shop
- Review and verify all received document from Engineering Dept. prior to submit to consultant
- Coordinating with Engineering, Procurement and reflecting all the activities status to the project scheduler to be well presented in the baseline
- Manage the site team (staff and non-staff) and the do the required semiannual evaluation
- Check the site works done as per the drawings.
- Installation of indoor & outdoor units.
- Installation of plumbing piping.
- Installation of HVAC duct works.
- Installation of firefighting works.
- Testing & commissioning.
- Guide sub-contractor way implementation correct and warred of errors before falling in
- Prepare the material & drawing to approve from consultant.
- Review and audit by implementation plans (as built drawings).
- Review supplies and make sure they conform to the approved samples and stored in the appropriate places and in a correct manner.
Fitness time industrial Jubail city projects 1-12-2015 to 1/5/2017
- Fitness time al medina al menorah city projects 1-6-2017 15/3/2018
- Fitness time industrial, Yanbu city projects 1-12-2015 to 7/4/2018
- Al sabai mosque, Jubail city - 1-2-2016 to 1-6-2016
- Al hmarany factory administration building industrial Jubail city from 1-4-2016 to 18/2/2017
- Al faran factory administration building industrial Jubail city from 5/4/2016 to 4/4/2017
- Dairy queen restaurant jubail city 15/12/2015 to 18/2/2016
- Lacaravilla restaurant, Al Sanbok Restaurants Trading Company
From 1/12/2015 to 1/6/2016, jubail city
- hanan al anaqa restaurant from 9/9/2016 to 5/4/2017jubail city
- masana café, jubail city from 6/6/2017 to 6/9/2017
- mecano restaurant, jubail city 7/72017 to 15/11/2017
- al sabai contracting company administration building 5/4/2016 to 8/8/2017
- ail mobark villa 5/9/2017 to 7/5/2018
- Responsibilities:
- Summary of Job Responsibilities:
Monitors construction Contractors’ mechanical installation and testing activities, including, but not limited to piping, leak tests, duct work & insulation, pumps, building management system, HVAC controls, domestic water systems, foundation de-watering system, etc. Assists Contractor with coordination of the MEP process, including the development of coordinated slab penetration drawings, MEP ceiling and wall coordination, coordination of condensate drain systems, power & control wiring coordination, fire pump powering and controlling through the Fire Alarm Control Panel Systems, concrete pad and isolation requirements. Witnesses Contractors’ quality control inspections to ensure that the permanent works are constructed according to the contract, applicable codes, standards, approved drawings and specifications (i.e. leak detection, equipment startup and commissioning).Reviews Contractor-submitted shop and as-built drawings, materials submittals, tie-in procedures, project schedules, and work permits; and assists SRCM in obtaining their approval and/or comments. Reviews Contractors’ mechanical quality assurance and quality control programs, inspection and test plans, installation, testing, and as-built procedures, for all mechanical systems and comments for transmittal to the contractors. Arranges meetings between the Contractor and concerned departments/organizations to resolve interfacing problems during construction. Organizes, coordinates, and conducts in conjunction with the concerned departments/organizations acceptance inspections and re-inspections of the completed permanent works, until all deficiencies are corrected and signed off. Assists the Project Controls Cost Engineer, or Contract Administrator, by reviewing Contractors’ invoices for correctness of installed quantities for the structural portion of the permanent works. Attends regularly scheduled meetings between the Construction team and the Contractor. Initiates and prepares for SRCM draft mechanical related letters, memos or reports to Contractors and other Departments
- First site (al jouf university, alqurayat community college) from
3-01-2012 to 11-04-2015
- Second site (NAJRAN UNIVERSITY HOUSING OF THE UNIVERSITY STAFF ON SHAROURA) from
12-04-2015 to 31-10-2015
- Responsibilities:
- Review all scope documents and highlight discrepancies if any to the concern Dept. (Engineering, Estimation &cost control)
- Review and verify all received document from Engineering Dept. prior to submit to consultant
- Attend the weekly and progress meeting with client
- Coordinating with Engineering, Procurement and reflecting all the activities status to the project scheduler to be well presented in the baseline
- Manage the site team (staff and non-staff) and the do the required semiannual evaluation
- Achieving the quality policy of construction which meets the client requirement
- Achieving the quality policy of safety at site and avoiding any safety misconduct
- Check the site works done as per the drawings.
- Installation of indoor & outdoor units.
- Installation of grills & diffusers.
- Installation of plumbing piping.
- Installation of HVAC duct works.
- Installation of firefighting works.
- Testing & commissioning.
- Able to prepare quantities calculation (ducts, drainage, system pipes, child water pipes, firefighting).
- Prepare the material & drawing to approve from consultant.
- Prepare reports for all mechanical work.
- Check calculation for water supply system.
- Check for hydraulic calculation firefighting wet sprinkler system.
- Review the final inventory quantities.
- Review and audit by implementation plans (as built drawings).
- Review supplies and make sure they conform to the approved samples and stored in the appropriate places and in a correct manner.
- Guide sub-contractor way implementation correct and warred of errors before falling in.
- First site (El qassim university medical college) from 3-03-2010 to
01-04-2011
- Second site (ministry of justice hafer el batten court) from 02-04-2011 to 01-09-2011
- Site engineer
- Responsibilities:
- Coordinating with Engineering, Procurement and reflecting all the activities status to the project scheduler to be well presented in the baseline
- Manage the site team (staff and non-staff) and the do the required semiannual evaluation
- Check the site works done as per the drawings.
- Installation of indoor & outdoor units.
- Installation of grills & diffusers.
- Installation of plumbing piping.
- Installation of HVAC duct works.
- Installation of firefighting works.
- Testing & commissioning.
- Able to prepare quantities calculation (ducts, drainage, system pipes, child water pipes, firefighting).
- Prepare the material & drawing to approve from consultant.
- Prepare reports for all mechanical work.
- Check calculation for water supply system.
- Check for hydraulic calculation firefighting wet sprinkler system.
- Review the final inventory quantities.
- Review and audit by implementation plans (as built drawings).
- Review supplies and make sure they conform to the approved samples and stored in the appropriate places and in a correct manner.
- Guide sub-contractor way implementation correct and warred of errors before falling in.
- Responsibilities:
• Main responsibility to keep those kinds of equipment's running without troubleshooting, 24 hours 365 days.
• Manager for construction roller mill in factory
• Belt conveyor, screw conveyor, load valve, water pump, automation equipment
• Manager for the heavy equipment in the factory
• Gas Battery Maintenance and troubleshooting
• Generators distribution panels Maintenance and troubleshooting.
• Compressors Motors Maintenance and Troubleshooting.
• Mill & Crusher equipment's Maintenance and Troubleshooting
• Fire Alarm system Maintenance and troubleshooting.
Higher Education Degree College: engineering shoubra University: Benha Graduation year: 2008 Grade: good Department: Mechanical Power Graduation project: Refrigeration and air conditioning Project Grade: A (EXCELLENT)