طارق Yacout, senior mechanical engineer Jeddah Branch

طارق Yacout

senior mechanical engineer Jeddah Branch

Zuhair fayez Partnership

البلد
المملكة العربية السعودية - جدة
التعليم
بكالوريوس, mechanical engineering
الخبرات
20 years, 1 أشهر

مشاركة سيرتي الذاتية

حظر المستخدم


الخبرة العملية

مجموع سنوات الخبرة :20 years, 1 أشهر

senior mechanical engineer Jeddah Branch في Zuhair fayez Partnership
  • المملكة العربية السعودية - جدة
  • أشغل هذه الوظيفة منذ أكتوبر 2016

Supervision on projects
o Bupa Arabia;Jeddah office building (completed)
o Sanabil 10 hotel in Makkah (started December 2016 completed November 2018)
o Assyad Holding Housing Project in Jeddah (SARA COMPOUND).
o Rabigh University hospital (400 beds) King Abdulaziz University Rabigh (HVAC consultant start 8 june 2018 up to present)
o Replacement for my colleagues during their annual leaves in the projects (Faqih diabetic center, Cristal tower in Jeddah, Maad Towers and Al Tayseer Towers in Makkah )

Technical support team member at Jizan university General Administration of projects في Zuhair Fayez partnership
  • المملكة العربية السعودية - جازان
  • أكتوبر 2013 إلى أكتوبر 2016

o Designing HVAC, firefighting, water supply, sewage, LPG and prepare B.O.Q for Mehleya Girls campus, which is nine main buildings in its two phases, service area including underground water tanks, LPG tanks and site landscape, I designed all mechanical utilities including the chiller plant serving this compound, and prepared required bidding documents.
o Designed HVAC, Firefighting, water supply, sewage, LPG for the campuses in jizan's governorates Al Darb, Addayer, Abu Areesh, Al Arda, Farasan Samta &prepare bidding documents.
o Designed swimming pool and sport Halls HVAC system For Abu Arish.
o Responsible for material submittal approval and representing the owner when a mechanical issue arises.

o Mechanical section head in the studies and designs department Jizan university General administration of projects.
o Coordinator and supervisor of the mechanical executions in Mehleya Girls Campus, a project of 290, 000, 000 SR in its first phase

Site Mechanical engineer في Zuhair Fayez Partnership
  • المملكة العربية السعودية - جازان
  • يناير 2013 إلى ديسمبر 2013

Supervise Mechanical site works in the construction project of Faculty of computer Science Jazan university

mechanical engineer في Saleh Abdullah Al-Rajhi for engineering consultations
  • المملكة العربية السعودية - الرياض
  • سبتمبر 2009 إلى سبتمبر 2012

• Revise calculation sheets, approve work shop drawings, test and receive
electro-mechanical & utilities installations like elevators, fire system, air conditioning
system and plumbing in the project of construction of an administrative building
for the ministry of social affairs in Saudi Arabia in Al Madeenah Al Monawara.
• Test and receive site mechanical erections including Elevators, plumbing, fire
system and air conditioning system for social observation house (which is a complex of 16000 m2 and 8000 m2 building area including mainly preparatory and secondary school dormitories, offices, GYM, playgrounds, Kitchen, Food areas and medical clinic) in Al MadeenahAl Monawara .
• Revise with local Civil Defense fire safety drawings for the administrative building
• Make occasional visits to Hayel, Gizan and Tabuke districts to receive site mechanical works from subcontractors when the responsible engineer is in vacations.

Technical support engineer في Hammam industries & co
  • مصر - القاهرة
  • يناير 2007 إلى سبتمبر 2009

2008 -2009
Technical Support engineer
Scope 1: Related to Projects.(project of de-dusting air sytems in two lead melting
factories
Coordinate with automation subcontractors and special suppliers
Scope 2: Related to R&D and certifications.
 Coordinate with AMCA international as the engineering contact of the company
o To Manage AMCA Certified rating program for Hammam's ADT fan .
o To manipulate test results with a computer code to develop unknown (untested) sound and air performance points to enlarge the useful certified performance points with minimum test points.
o Participate in AMCA work group to revision the draft of Fan efficiency standard AMCA 205.
Scope 3:Offers preparation
o Study the Bids documents and prepare some aspects of the offers.
2007
Projects served :
• de-dusting system for Addas Factory
o Adding ATEX solutions to a duct system
• GM paint House project:
o Subcontracting Air Make Up units AMUs (large fan units with spray nozzles humidifiers and Maxon burners, three filtration stages and sound attenuators to condition the air according to the painting process requirements, in addition to psychometric work. I equipped these units with water pump system, level switches (vibrating fork type) for the Italian Main Contractor GEICO .
• Burg El Arab Airport
o Automating by software code writing the calculation of duct sound attenuation and required silencers Octave band performance for a national project ( given fan acoustical performance and duct system Runs, I automated the procedures described in SMACNA HVAC design hand book.

• Becoming Hammam industries designated contact in AMCA international's records for Engineering and Certified Ratings Program Laboratory Test.
• Selecting cooling Towers, evaporative coolers and dust collectors from the products of the companies we are representing in Egypt

projects engineer في Hammam industries
  • مصر - القاهرة
  • سبتمبر 2004 إلى ديسمبر 2006

2005-2006
Projects engineer (actually I was reporting to the president directly):
Many projects served I would choose to mention the project of installing exhaust fans fire rated connected to fire alarm safety system to divert the supply ducts into fume exhaust system in case of fire.
My every day duties included:
• Regulating the sites execution to be coherent to the relevant standards and codes.
• Scheduling the works with Microsoft project after site survey.
• Revise material lists.
• Formulated duct design calculation spread sheets for fans operating point adjusting and system commissioning.
• Drew AutoCAD as built drawings at lake of draftsmen.

2004
Site engineer.
The pioneer project of these days was installing two de-dusting systems in the factory of Al Ahram for metal casting.

design engineer في Crown home consulants
  • مصر - القاهرة
  • أكتوبر 2001 إلى أبريل 2002

• That was a great chance to read Carrier handbook and HVAC control chapters from ASHRAE volumes.
• To practice heat load calculation for some projects, like private luxury Villas.

الخلفية التعليمية

بكالوريوس, mechanical engineering
  • في Arab Academy for science and Technology and maritimes
  • أغسطس 2001

• Bachelor degree in mechanical engineering 2001 from Arab academy for science and technology and maritime transportation. HVAC&R division MY Grad was Very Good.GPA:3.14 • Up to preparatory stage in repute French schools .then in repute Arabic public schools.

Specialties & Skills

Fire Fighting
ENGINEER
AIR CONDITIONING
AUTOCAD
FIRE SAFETY
LABORATORY
PLUMBING
SENSORS
SHOP DRAWINGS
TECHNICAL SUPPORT

اللغات

الانجليزية
متمرّس
الفرنسية
مبتدئ

التدريب و الشهادات

MCP (الشهادة)
تاريخ الدورة:
March 2003
صالحة لغاية:
March 2003
MCP (الشهادة)
تاريخ الدورة:
February 2003
صالحة لغاية:
February 2003
MCP #101606218 (الشهادة)
تاريخ الدورة:
January 2003
صالحة لغاية:
February 2003
(الشهادة)
تاريخ الدورة:
July 2002
صالحة لغاية:
July 2002
(الشهادة)
تاريخ الدورة:
June 2007
صالحة لغاية:
June 2007
MCP (الشهادة)
تاريخ الدورة:
April 2003
صالحة لغاية:
April 2003
(الشهادة)
تاريخ الدورة:
June 2002
صالحة لغاية:
June 2002
MCP (الشهادة)
تاريخ الدورة:
March 2003
صالحة لغاية:
March 2003