Shift Engineer
Darwish interserve facility management
مجموع سنوات الخبرة :12 years, 9 أشهر
Project: ‐ FM004, ATCC - Hamad International Airport
Optimized CMMS for customer assets and services allowing the customer to earn
and maintain the customer systems includes MDB, MCC, UPS, VFD, ATS, MOTOR,
CHILLERS, COOLING TOWERS, AHU, FAHU, CRAC unit, VRVunits and split
units and many other ventilation units.
Perform Offload & On load test of Generator with monitoring of parameter.
Develop, implement, and maintain preventive maintenance and energy
conservation programs for MEP services according to corporate standards.
Analyzed historical data from system and equipment failures and implemented
corrective actions to improve total system.
Ensure compliance with corporate policies, international standards, localregulations,
and other environmental considerations.
Establish training and development programs to enhance employee knowledge ofbest
practices regards emergency response and upkeep of Assets.
Daily, weekly & Monthly reports of O&M submitting to the Managements.
Ensure the PPM of MEP equipment follows the schedule.
Control and monitor the contractor's KPI and take the decision on the renewal of
AMC.
Allocate manpower and resources to maintain unit functionality to ensure a
smooth and cost-effective manner.
Attend meetings, inspection and monitoring the project progress report with
clients.
Project: ‐ High Rise Building
Maintenance of Power transformer (5MVA, 33KV/6.6KV) & Auxiliary Transformers
(30KVA, 6.6KV/415V)
Operation & Maintenance of 33kv.6.6kv.415v switchgear panels
Monitoring control of BMS operation.
Operation & Maintenance of Circuit Breaker VCB, ACB
Maintenance of 15KVA Ups, Battery Chargers & Battery Bank
Operation & Maintenance of Control Relay. LT Panel, DB
Maintenance of LT Motor up to 75kw & VFD
Operation & Maintenance of HVAC System, 225TR chillers, Indoor & Outdoor
Units
Prepared technical documentation for operation, troubleshooting and maintenance
of systems
Monitored manufacturing operations of electrical devices for compliance with
safety protocols
Direct & coordinate plant workers engaged in routine operations andmaintenance
activities
Coordinating with maintenance staff & housekeeping supervisor
Calibrated and repaired existing systems to maintain functionality.
Project: - Katara Cultural Village
To supervise the technicians to ensure the plant equipment are running
smoothly as per the operating Specification. Monitor and maintain records.
Trouble shoot and rectify minor problems Identify the root cause and arrange toraise SO
if jobs must be carried out by contractor.
Responding immediately to equipment break downs.
To escalate anyemergencies immediately to the respective management.
Maintaining sub-station Dry type Transformer range 33KV/415V 1600KVA & 800A
HTACB.
Operation & Maintenance of 33kvyard, Circuit Breaker, ACB, Transformers, Motor
Control Center & Diesel Generator.
To formulate maintenance schedules, analysis system performance, propose suitable
solutions and organize quality inspections of Electrical Substation, CCTV, Fire
Alarm, BMS (Building Management System), LMS (Lighting Management System),
PA System & Car Park Systems.
To record any system failure, report to the manager and prepare incident report.To
coordinate with soft service team & landscaping team.
To verify monthly COC (certificate of completion) for preventive & Corrective
Maintenance.
To train technicians on new equipment, CAFM, emergency escalation etc.
Engaged with contractors to perform their Planned Preventive Maintenance and
Corrective Maintenance.
Project: - Reliance Jio 4G
Perform ATP 11B, SCFT and Cluster Drive Test Using XCAL tool.
Perform Alarm Rectification During Cluster Test.
Perform Optimization during Cluster Test.
Perform Justification of problem comes during SCFT and Cluster Drive.
Monitor the RF parameter like RSRP, RSRQ, SINR, CQI and others.
RF parameter returning like antenna tilt, Azimuth, Height, Handover, and neighbor planning.
Project: ‐ High Rise Building
To perform daily inspection of assigned building to check the normal operation of
MEP systems.
Maintaining Three Generator set range of 500KVA & synchronizing process.
Maintaining Two UPS range 100KVA at on load & off load condition
Maintaining HT/LT Transformer range 11KV/433V 1600KVA & 800A HTVCB.
Maintaining Three Chiller Range 127TR, 5TR to 30TR AHU, 2TR to 16.5 TR indoor
AC units & 2TR FCU for Plant room.
Monitoring the range of temperatures, WLD detector & FM200 Panel for High
Performance Cluster based Server area.
Maintaining CCTV Camera, Fire Alarm System, PA system, and Door Access System.
Project: ‐ Heavy Chemical Division
Involved in testing and commissioning of electrical equipment 110KV/33KV Sub-
station, Include the following equipment.
110KV/33KV Sub-station consisting of 25/30MVATransformer145KV,
3150A Siemens outdoor SF6 breaker
33KV JYOTI make MOCB up to 1500MVA and 415VLTbreakers
33KV/ 300 V, Auto Regulating Transformer up to 19.63 MVA.
33KV/ 415 V Auxiliary Transformer up to 2.5 MVA.
33KV, 6.72 MVAR Capacitor bank.
Project: ‐ TN PWD Buildings
Planned, assigned, supervised, and inspected the work of electricians
Supervised and evaluated installation and repair of lights and power in buildingsand
facilities.
Prepared jobs and estimates labor and material requirementsOrdered
and maintained stock of materials and supplies
Performed periodic inspections of existing electrical wiring systems andequipment
Supervised the maintenance of tools and equipment and work records
Monitored priorities and liaised between maintenance team and management,
delegating tasks to complete on time
Coordinated electrical system maintenance and repair with other departments,
outside agencies and public utilities.
Fuzzy logic base load management system
Two Speed Control of three phase industrial drive
لقد تم حذف الرابط بسبب انتهاكه لسياسة الموقع. يرجى التواصل مع قسم الدعم لمزيد من المعلومات.