Submitting more applications increases your chances of landing a job.

Here’s how busy the average job seeker was last month:

Opportunities viewed

Applications submitted

Keep exploring and applying to maximize your chances!

Looking for employers with a proven track record of hiring women?

Click here to explore opportunities now!
We Value Your Feedback

You are invited to participate in a survey designed to help researchers understand how best to match workers to the types of jobs they are searching for

Would You Be Likely to Participate?

If selected, we will contact you via email with further instructions and details about your participation.

You will receive a $7 payout for answering the survey.


User unblocked successfully
Ahsan Muhammad, Project Electrical Engineer (Power Systems)

Ahsan Muhammad

Project Electrical Engineer (Power Systems)·Andritz Automation,

Canada

Diploma, Electronics And Computer Control System

Work experience

Total years of experience: 28 years, 6 months

Project Electrical Engineer (Power Systems)

January 2022 - Present

Andritz Automation,

Prince George, Canada

January 2022 - Present

• Provided engineering support for electrical capital projects for
switching and substations of voltage class from 69KV - 4.16KV
from conception to successful completion in terms of safety,
reliability, timely completion and within budget and scope.
• Performed power system studies such as load flow, short circuit,
Arc flash, Harmonic, Equipment Evaluation analysis, Sized
Ground grid and Underground cables using SKM, EASYPOWER &
ETAP software.
• Leaded a team of construction crew and subcontractors to put
substation into service by in service date milestone.
• Resolved field issues during construction.
• Attended FAT and prepared ITPs and commissioning procedures
for substation testing.

Company industry:
Electrical Engineering

Senior Electrical Engineer

January 2021 - April 2022

Waha Oil Company,

Tripoli, Libya

January 2021 - April 2022

• Managed the Start-up and commissioning of 13.8KV, 26MW rated
gas turbine.
• Prepared data sheets, single line, schematic, lighting, grounding
drawings and GA layouts
• Engineered, Installed, tested, and commissioned the equipment
such as (35KV - 15KV / 600V) AIS Switchgears, MCCs,
transformers, relays, distribution board & Starters, fire alarm
systems and HVAC for electrical buildings/Substations.

Company industry:
Oil & Gas

Senior Electrical Engineer

January 2020 - November 2020

Vertex Resource Group Ltd,

Calgary, Canada

January 2020 - November 2020

• Prepared scope of work, detailed design, and developed
engineering work packages for Power distribution systems and
products.
• Ensured that electrical and engineering designs are compliant
with code requirements.
• Prepared ITPs and validated the testing/commissioning of
Buildings including equipment, fire alarm and HVAC system.
• Coordinated deliverables, submissions and drawings produced by
the electrical engineering design staff and ensured revisions are
completed accurately and in a timely manner.
• Assisted in the development of electrical design engineering
pursuit and execution budgets to meet project milestones and
deliverables.
• Prepared and delivered quotations in a timely manner.
• Attended site meetings, and meetings with clients to provide
knowledge and solutions to the various challenges involved with
each project.

Company industry:
Manufacturing

Technical Bids Manager

January 2018 - January 2019

Siemens,

Calgary, Canada

January 2018 - January 2019

• Developed scope, schedule budget for 230KV / 13.8KV outdoor
substation and 66KV/12.47KV GIS substation.
• Worked on high voltage substation green field designs and
brown field upgrades/retrofits for utilities.
• Prepared with engineering team connection diagrams and
control schematics for power substation equipment including
circuit breakers, transformers, and capacitor banks.
• Reviewed equipment specification documents for procurement.
• Coordinated internal resources and third parties/vendors for
flawless execution of the bid.
• Ensured bids are delivered on time, within scope and within
budget.
• Ensured the availability of resources.
• Developed a detailed bid plan to monitor and track progress.
• Managed the relationship with client and all stake holders.
• Managed changes to the bid scope, bid schedule and cost using
appropriate verification techniques.
• Created and maintained bid documentation.
• Clarified the technical and commercial discrepancies with the
client.
• Prepared and reviewed technical/commercial aspects of the job,
ensured all services are included in the final price to the
customer.
• Arranged lesson learned meetings with internal teams after
completion of bid.

Company industry:
General Engineering Consultancy
Job role:
Sales

Electrical Maintenance Engineer

January 2017 - January 2018

Schlumberger, Heavy Oil Production Facility Umm

Abu Halifa, Kuwait

January 2017 - January 2018

• Established and maintained plans for the maintenance,
construction, commissioning and startup of plant equipment
such as 13.8KV/600V Switchgears, Generators, Transformers,
Cables, MCCs, VFD/Motors (Ranged from 30KW - 230KW),
Relays, UPS, DC Battery, lighting, communication and grounding
system. Ensured the equipment worked to the specification and
applied the project commissioning plan for the work. Made
improvements to and offered advice about operational
procedures. Developed the electrical team mobilization plan.
Provided support to technicians and wrote technical reports.
• Prepared the operation and maintenance manuals. Made sure
site HSE requirements are met. Interfaced with other disciplines
to ensure integration of activities. Assisted during the database
preparation for pre-commissioning status index and
commissioning technical data base. Attended meetings and
delivered technical solution to the client.
• Implemented proactive and preventive maintenance systems for
plant equipment. Organized spares parts inventory system and
ordered spares for capitals and consumables. Scheduled
manpower for shift manning and general shift jobs. Prepared
monthly energy and root cause analysis report.

Company industry:
Electrical Engineering

Testing and Commissioning Coordinator (Northwest

January 2015 - January 2016

Schneider Electric Calgary,

Edmonton, Canada

January 2015 - January 2016

• Prepared Inspection test plans (ITPs) and conducted
testing/commissioning of equipment and systems such as
(34.5KV-600V) GIS/AIS switchgears, Transformers, Cables, MCCs,
VFDs, Relays, UPS, DC Battery, lighting, communication, and
grounding. Ensured the performance of all field testing on
Ehouse/VFD house/Pump Station/Substation is completed
accurately and safely. Provided technical instructions, mentoring
and guidance regarding electrical power system to field testing
technicians.
• Ensured compliance of testing QA/QC process. Delivered solution
to the Project Managers to address client needs and provided
cost analysis on test solutions. Regularly met and corresponded
with client to act independently on technical matters related to
testing and commissioning. Maintained relationship with client
personnel.

Company industry:
Electrical Engineering

Senior Electrical Project Engineer

January 2012 - January 2015

Siemens Calgary,

Calgary, Canada

January 2012 - January 2015

• Designed, Engineered, Installed, tested, and commissioned the
equipment such as (35KV - 15KV / 600V) arc resistance or non
arc resistance MCCs, AIS/GIS Switchgears, VFDs, transformers,
relays, distribution board & Starters, fire alarm systems and
HVAC. Provided integrated solutions for Electrical buildings (E
houses/ VFD houses), Pump Stations and for (35KV - 15KV /
600V) Substation compromising: MV transformer, MV/ LV
switchgear and disconnect switch. Supervised a group of
engineers / specialists to prepare single lines, General
Arrangements (GAs), cable tray, grounding, schematics, power,
interconnections & lighting layouts
• Inspected the site/fabricator yard to make sure all the installation
is as per approved drawings, specifications, and codes. Installed,
tested, and commissioned the facilities, systems & equipment.
Prepared as built drawings, operation & maintenance manuals.
Witnessed FAT of equipment at factory and site. Recommended
solutions based on interpretation of ETAP and CYME reports.
Prepared data sheets for electrical equipment. Conceptual
drawings and FEED for the projects. Engineering man hours.
Scope of work for new projects. Inspection and test plans (ITPs) &
planned the site and design activities.
• Prepared complex tender documents, review specifications,
customer requirements and support cost calculations & ensured
quality and on time delivery of tenders. Provided technical input
for change orders to management. Presented cases in front of
customer for design change or improvement. Conferred with
other engineers and management as well as contractors,
consultants and distributors. Closely worked with Project
Managers, Sales, Maintenance and Operations.

Company industry:
General Engineering Consultancy

Senior Bid Specialist

January 2011 - January 2012

Schneider Electric Calgary,

Calgary, Canada

January 2011 - January 2012

• Supervised a group of specialists preparing quotations for arc
resistance and non-arc resistance type LV / MV MCCs,
switchgears, switchboards, LV/MV variable frequency drives &
starters. Managed the process of delivering the proposals to the
customer. Coordinated sales strategy, technical design, and legal
input for the submission of bids. Provided technical clarification
to the customers.

Company industry:
Electrical Engineering

Inside Sales Representative

January 2008 - January 2011

Eaton Electric Edmonton,

Edmonton, Canada

January 2008 - January 2011

• Prepared Bids using Bid Manager Eaton proprietary software.
• Provided technical assistance on all Eaton products to customer
via telephone or emails. Answered technical questions from
OEMs, consultants, distributors, and end users. Obtained
necessary project details required to prepare a quotation, either
from the distributor, end user or consultant. Submitted quotation
requests (c/w necessary RFQ forms) to appropriate Eaton
Electrical Marketing Reps. And/or Plant, complete with take-offs,
drawings, and specifications

Company industry:
Sales Outsourcing

Application Specialist

January 2006 - January 2008

Ontor Limited

Edmonton, Canada

January 2006 - January 2008

• Determined customer requirements and provided specifications/
technical application solutions of control and electrical
equipment; Provided application support on Siemens, Proface
(Xycom), SIXNET, HMS Anybus, Eaton Electric and AC-Tech
equipment; Collaborated with customer engineers to develop
solutions as required. Continuously improved product and
technical application knowledge. Worked cohesively with other
departments (Marketing, Finance, and other business units).

Company industry:
Sales Outsourcing

Customer Service Representative

January 2002 - January 2006

Teleperformance

Toronto, Canada

January 2002 - January 2006

• Interacted with clients and utilized organizational and analytical
skills to handle the upset customers for Rogers. Fulfilled daily,
weekly, and monthly sales quota while functioning as a sales
representative. Consistently met and exceeded sales target,
assured quality services, increased sales, and customer
satisfaction. Provided floor support for training of new
individuals. Verification of sales for new and existing customers.

Company industry:
Call Centers & Customer Care Outsourcing

Electrical Engineer

January 1997 - January 2002

ARCAN,

Jubail, Saudi Arabia

January 1997 - January 2002

• Installed, tested, and commissioned high and low voltage
electrical cables, motors, transformers, breakers, Mccs, relays,
cts& pts, switchgears, lighting, fire alarm, telephone, and public
address systems.
• Performed design calculations for cable sizing, transformers,
circuit breakers, voltage drop and illumination level of
luminaries. Planned and scheduled site work; Prepared design,
shop and as-built drawings for residential, commercial, and
industrial facilities, bill of quantities, bids, estimated the cost of
new projects. Planned and scheduled the site work. Attended
meetings on regular basis with consultants to solve site and
design problems.

Company industry:
Construction & Building

Maintenance Engineer

January 1996 - January 1997

National Fibers Ltd,

Karachi, Pakistan

January 1996 - January 1997

• Maintained and trouble-shot motors, transformers, switchgears,
AC/DC drives. Maintained and kept functional 1.1 MW
Cogeneration power plant. Scheduled preventive maintenance.

Company industry:
Petrochemicals & Refined Petroleum Products Manufacture
Job role:
Maintenance, Repair, and Technician

Education

Seneca College of Applied Sciences

April 2006

April 2006

Diploma, Electronics And Computer Control System

Canada

Seneca College

April 2006

April 2006

High school or equivalent, Electrical

Canada

Adamson University

October 1995

October 1995

Bachelor's degree, Electrical Engineering

Philippines

Adamson University

January 1995

January 1995

Bachelor's degree, –Electrical Engineering

Philippines

Skills

ELECTRICAL ENGINEERING
Intermediate
ELECTRICAL ENGINEERING
Intermediate
ENGINEERING ANALYSIS
Intermediate
ENGINEERING ANALYSIS
Intermediate
REPAIRING MANUAL MECHANICAL
Intermediate
REPAIRING MANUAL MECHANICAL
Intermediate
COMPLIANCE TESTING
Intermediate
COMPLIANCE TESTING
Intermediate
COMMISSIONING
Intermediate
COMMISSIONING
Intermediate
LOAD TENDERING
Intermediate
LOAD TENDERING
Intermediate
PROJECT MANAGEMENT
Intermediate
PROJECT MANAGEMENT
Intermediate
COMPOSITE MATERIALS
Intermediate
COMPOSITE MATERIALS
Intermediate
POWER DISTRIBUTION
Intermediate
POWER DISTRIBUTION
Intermediate
ELECTRICAL SUBSTATION
Intermediate
ELECTRICAL SUBSTATION
Intermediate

Languages

English
Expert
Urdu
Native Speaker