Senior Electrical engineer
Omrania & Associates
Total years of experience :15 years, 6 Months
Ensure compliance with established standards, codes, project guidelines, technical requirements, Design intent, and QA/QCP procedure within the Electrical discipline.
Confirm that the Contractor’s, submitted shop drawings, and product data, are strictly in compliance with IFC contract drawings, specifications, BOQ, applicable standards & codes, and schedules approved by the Design team.
Confirm that the Contractor’s product data, materials/samples, and material submittal are strictly in compliance with the Project specifications and the client’s approved manufacturers list.
Conduct technical investigations involving the origination or modification of material, component, or process specifications and evaluate design criteria based on codes and standards requirements.
Review and monitor the Contractor’s Quality Control Plan, and method statements, and make recommendations for any remedial action considered necessary.
Attend off-site factory inspections when required.
Confirm that the Contractor’s prototypes, mock-ups, installation, and testing procedures are following the approved shop drawings and approved method statements.
Manage project schedules, budgets, and resources, ensuring timely handover and providing cost-effective solutions without compromising quality.
Foster strong client relationships by effectively communicating project progress, addressing concerns, and ensuring client satisfaction.
Conduct in conjunction with the concerned departments acceptance inspections and re-inspections of the completed permanent works, until all deficiencies are corrected and signed off.
Ensure that all safety regulations and procedures are fully implemented at the site.
Attend scheduled meetings with clients and contractors and initiate and prepare electrical-related letters, memos, or reports to Contractors and other Departments.
Testing, pre-commissioning, and commissioning of electrical systems.
To check contractor’s monthly invoices based on actual work Execution, material delivery, and Project BOQ.
Provide input into the design phase to optimize electrical systems.
Raising the snag list to the contractor and following the de-snagging work at the site.
Oversee preventive and corrective maintenance activities.
Maintaining effective relationships with each contractor’s testing and commissioning managers to establish a collaborative and supportive environment for the conduct of integrated testing.
Review of shop drawings for electrical systems (Low voltage and Low current) and approve for Execution when compliance with Design, contract, BOQ, and project specification is verified.
Assisting all inspection procedures with Site inspectors.
Review material technical submittal to verify compliance with contract requirements, project specifications, and requirements compulsory to achieve the desired function of electrical utilities.
Inspecting material samples, site deliveries of materials, and workmanship.
Make sure that an activity offered in the inspection has an approved shop drawing, method statement (MS), and QCP.
Ensure coordination has been made among all MEP services, structural and Architectural disciplines, and make certain work execution at the site is in progress as per the approved coordination drawing.
To ensure contractor’s work is done in a manner that does not cause unnecessary or improper interface with the public, including public and private pathways as well footpaths.
Make sure any non-conformance has been reported and corrected.
Evaluate the Red line as built drawings submitted by the contractor and make sure all site conditions are properly addressed.
To Review Requests for technical information (RTI) in case technical reasons require a change in shop drawing, BOQ, or approved document.
To Review and ensure Implementation of approved QA/QC procedures at the site.
Participate with client disciplines in reviewing the close-out report as submitted by the contractor.
Proposals to client ensuring project proper, timely as well successful handover to client and acquire reliable MEP services.
Witnessing Testing, pre-commissioning, and commissioning of electrical systems.
Raising the snag list to the contractor and following the de-snagging work at the site.
Provide technical assistance to contractors to comply with the requirements of Saudi Electricity Company, Saudi Telecom Company, and other Governmental Authorities.
Maintain accurate project documentation, including reports, drawings, and project records.
To ensure the installation as per latest approved shop drawings.
To ensure the approved material is used at site.
To Review Red line as built drawings as per actual work execution at site.
To ensure any non-compliance with project specifications and contract requirements is reported and corrected.
To Review Request for technical information (RTI) in case technical reasons require change in shop drawing or approved document.
To make recommendations To Review Request for technical information (RTI) in case technical reasons require change in shop drawing or approved document.
Provide technical assistance to comply with the requirements of Saudi Electricity Company, Saudi Telecom Company and others Governmental Authorities.
To check contractor’s monthly invoices based on actual work Execution, material delivery and Project BOQ.
To check & verify the feasibility of any activity prior to commence at site.
Attending weekly meetings with contractor and client.
To ensure the work Execution as per approved Quality control plan (QCP), ITP and method of statements.
Coordination between MEP, structural and Architectural discipline to avert overriding of services.
Preparing reports on work progress with respect to project schedules and resources.
Proposals to client ensuring project proper timely as well successful handover to client and acquire reliable MEP services.
Review and make recommendation of shop drawings and quantities for approval and accuracy.
Review material submittals for material approval as per project specification and requirements.
Review and make recommendation regards contractors payment, quantities and variations.
Testing of materials and systems related to engineering works.
The systems installations that I did and supervised are listed below.
Medium voltage system, Low voltage system, Fire Alarm system, CCTV System, MATV System, Grounding& lightning protection System, Public address System, Data & Telecommunication System, Building management System, NOVEC System, Access Control System, Audio visual System. Gate barrier & UVSS..
Review contractor submittals for compliance with submission requirements and client needs.
Assisting senior engineer in evaluating change order proposals. Review design progress submissions for constructability and conformance to the contract requirements.
Ensure that the contractor personnel are using the latest edition of approved shop drawing, MS, QCP, and ITP as per the project master index.
Closely monitor and check continuously materials delivered to site, ensure compliance with QA/QC procedure.
Closely monitor site activities to ensure quality of work is in compliance with contract requirements, good construction practices, only approved materials are used compliance with shop drawing and report to senior electrical engineer.
Review the relevant as built drawing as submitted by contractor and make sure that all site conditions are properly addressed.
Making effective communication and work collaboratively with Client and Contractor in assuring work conforms with contract
Performing field inspections in compliance with National Electrical Codes and approved shop drawings.
Reviewing of workshop drawings for different electrical systems and installation.
Materials approvals as per specification and codes.
Performing coordination for ongoing site operations
Review Technical queries submitted by contractor.
Assistance of senior engineer in issuing of NCR.
Conduct testing for electrical installation.
Installation supervision of different types of lighting system
Installation supervision of power system
Installation supervision of Low current systems stated below.
Fire Alarm system, Public Address system, CCTV system, Security Door access system, carbon monoxide sensors system, Park management system, Building management system
Preparing work shop drawings for electrical jobs.
Preparation of Takeoff quantities.
To assure the installation as per project specifications approved shop drawing and NEC.
Testing of Electrical Installation for proper functioning.
Make sure that changes are recorded on shop drawing with actual dimensions for preparation of as built drawing.
Submittals to consultant & taking approvals, including all paper work required for consultant.
Making field inspection request for consultant.
Making material submittal for consultant.
Ensuring that safety rules and regulations are strictly followed at site.
Controlling work force on site for day to day activities.
Making daily progress reports.
Coordinating electrical installations with other disciplines.
Reporting all the related activities to project manager.
Reviewing all quality related activities & preparing all quality related reports on site.
Preparing Weekly and monthly progress report.
Preparing Material receiving report.
Preparing the data of the material received on as per purchase order.
Coordinating with execution team for project quality system.
Verifying and informing and advising site team for any defects.
Coordination with senior engineer for replying the NCR for any nonconformance.
Reviewing/keeping the record of inspections
courses: Pakistan Engineering Council Registration Number Elect/25059 Registered with Saudi Council of Engineers (SEC) ID NO: 256778