Total Years of Experience: 14 Years, 10 Months
January 2019
To Present
Senior Instrument & Control Engineer
at Petronas Technical Services Sdn Bhd
Location :
Malaysia - Sungai Udang
• Responsible for instrument engineering design activities, including preparing, reviewing, and approving engineering deliverables.
• Participated in the development of the overall procurement contracting strategy (OCS) and Invitation to Bid (ITB) for instrument-related equipment/systems, including Tender Plan, Technical Clarification, Technical and Commercial Bid Evaluation, and negotiation strategies.
• Involved in engineering design review/challenge with contractors/vendors for assigned work packages, including specifications, datasheets, loop drawings, general arrangement drawings, and other relevant engineering drawings for Approval for Construction purposes.
• Participated in the development of Project Risk Assessments, Job Method Statement (JMS), Constructability Reviews, and Integration Planning between the Project Management Team (PMT) and Operations.
• Led the detailed planning, work scoping, and execution of Instrument work packages for RESET Turnaround Campaign for PSR1/2/MG3(2022) and COGEN Shutdown (2021) to ensure work is completed within the designated time frame.
• Led instrument project installation work and commissioning activities for MRCSB Turnaround 2022 for Control Valves, Transmitters, PLC, DCS Controllers, SOVs, and Analyzers (Hydrogen & SWAS).
• Led the Management of Change (MOC) activities for RESET and Plant Change Delivery (PCDM) for Instrumentation works for TA2022, from review sessions with stakeholders up until MOC approval.
• Ensured the technical integrity, cost, schedules, constructability, operability, and maintainability were upheld and met to deliver a fit-for-purpose solution to the end-user (MRCSB).
• Participated in engineering design reviews, including hazard identification (HAZID), hazard operability (HAZOP), PDMS 3D Model Review, Constructability Study, and any other specialized engineering services, e.g., Fire & Gas Mapping.
• Ensured compliance with safety requirements by conducting safety audits and developing/reviewing job hazard analysis (JHA) with the HSE team.
• Facilitated and led any SWIFT Risk Assessment (RA) sessions for Instrument work packages to identify hazards, consequences, and mitigation plans.
• Conducted assessments of Instrument and Control assets, based on their asset life cycle and current condition.
• Identified deterioration mechanisms and assessed future asset life, resulting in short-term and long-term expenditure plans, cost analyses, and maintenance and replacement plans.
• Concluded with findings, recommendations, and action plans, along with associated costs, to extend the plant life and operation for the asset life cycle.
• Prepared and delivered Instrument engineering packages as part of the Basic Engineering Design (BED) and Detailed Engineering Design (DED).
• Collaborated with the MRCSB in-house engineering team to prepare, design, and execute multiple plant modification projects, providing Instrument input as part of the Detailed Feasibility Study (DFS).
• Participated in technical design integrity checks of project deliverables to ensure compliance with PETRONAS Technical Standards (PTS), international codes and standards, best practices, and local authorities or government regulations.
• Checked vendor design calculations, documents, and drawings to ensure compliance with client specifications.
• Participated in the development of the overall procurement contracting strategy (OCS) and Invitation to Bid (ITB) for instrument-related equipment/systems, including Tender Plan, Technical Clarification, Technical and Commercial Bid Evaluation, and negotiation strategies.
• Involved in engineering design review/challenge with contractors/vendors for assigned work packages, including specifications, datasheets, loop drawings, general arrangement drawings, and other relevant engineering drawings for Approval for Construction purposes.
• Participated in the development of Project Risk Assessments, Job Method Statement (JMS), Constructability Reviews, and Integration Planning between the Project Management Team (PMT) and Operations.
• Led the detailed planning, work scoping, and execution of Instrument work packages for RESET Turnaround Campaign for PSR1/2/MG3(2022) and COGEN Shutdown (2021) to ensure work is completed within the designated time frame.
• Led instrument project installation work and commissioning activities for MRCSB Turnaround 2022 for Control Valves, Transmitters, PLC, DCS Controllers, SOVs, and Analyzers (Hydrogen & SWAS).
• Led the Management of Change (MOC) activities for RESET and Plant Change Delivery (PCDM) for Instrumentation works for TA2022, from review sessions with stakeholders up until MOC approval.
• Ensured the technical integrity, cost, schedules, constructability, operability, and maintainability were upheld and met to deliver a fit-for-purpose solution to the end-user (MRCSB).
• Participated in engineering design reviews, including hazard identification (HAZID), hazard operability (HAZOP), PDMS 3D Model Review, Constructability Study, and any other specialized engineering services, e.g., Fire & Gas Mapping.
• Ensured compliance with safety requirements by conducting safety audits and developing/reviewing job hazard analysis (JHA) with the HSE team.
• Facilitated and led any SWIFT Risk Assessment (RA) sessions for Instrument work packages to identify hazards, consequences, and mitigation plans.
• Conducted assessments of Instrument and Control assets, based on their asset life cycle and current condition.
• Identified deterioration mechanisms and assessed future asset life, resulting in short-term and long-term expenditure plans, cost analyses, and maintenance and replacement plans.
• Concluded with findings, recommendations, and action plans, along with associated costs, to extend the plant life and operation for the asset life cycle.
• Prepared and delivered Instrument engineering packages as part of the Basic Engineering Design (BED) and Detailed Engineering Design (DED).
• Collaborated with the MRCSB in-house engineering team to prepare, design, and execute multiple plant modification projects, providing Instrument input as part of the Detailed Feasibility Study (DFS).
• Participated in technical design integrity checks of project deliverables to ensure compliance with PETRONAS Technical Standards (PTS), international codes and standards, best practices, and local authorities or government regulations.
• Checked vendor design calculations, documents, and drawings to ensure compliance with client specifications.
January 2018
To December 2018
Instrument and Electrical Engineer
at BASF-PETRONAS Chemicals Sdn Bhd
Location :
Malaysia - Kuantan
• Provide site engineering and construction support for BASF 2018 plant modification projects.
• Identify any new instruments against redline marked-up of P&ID given and prepare its relevant specification/datasheet and sizing calculation.
• Developed and reviewed Purchase Requisitions (PR), Material Take-Offs (MTO), Technical Bid Evaluations (TBE), and Technical Clarifications (TC) for Instrument packages.
• Evaluated and reviewed equipment specifications, bid enquiry packages, and provision of engineering services for the purchase of instrumentation and control engineering-related materials and equipment.
• Assist designer to develop and check engineering drawings for Issued for Construction and As-Builting.
• Identify any new instruments against redline marked-up of P&ID given and prepare its relevant specification/datasheet and sizing calculation.
• Developed and reviewed Purchase Requisitions (PR), Material Take-Offs (MTO), Technical Bid Evaluations (TBE), and Technical Clarifications (TC) for Instrument packages.
• Evaluated and reviewed equipment specifications, bid enquiry packages, and provision of engineering services for the purchase of instrumentation and control engineering-related materials and equipment.
• Assist designer to develop and check engineering drawings for Issued for Construction and As-Builting.
January 2013
To December 2017
Instrument Engineer
at Ranhill WorleyParsons Sdn Bhd
Location :
Malaysia - Kuala Lumpur
• Prepared specifications for long lead items such as Wellhead Control Panels, Actuated On-Off Valves, Control Valves, Safety Relief Valves, and associated datasheets.
• Developed Instrument and Fire & Gas Schedules, Set Points, and I/O Lists.
• Prepared Scope of Work for Shutdown Systems (SDS) and Distributed Control Systems (DCS).
• Prepared datasheets for field instruments, including Flow Elements and Flow/Pressure/Temperature/Level Transmitters, as well as Smart Wireless Gateways and Wireless Field Instruments.
• Reviewed Instrument drawings, such as system block diagrams, architecture drawings, hook-ups, loop diagrams, interconnection wiring, cable/tubing routing, and equipment layouts.
• Conducted sizing calculations for Control Valves, Orifice Plates, Restriction Orifices, and PSV.
• Developed Fire & Gas Cause and Effect Matrices.
• Reviewed and incorporated vendor data.
• Conducted offshore site visits and produced Site Visit Reports, including recommendations.
• Developed Instrument and Fire & Gas Schedules, Set Points, and I/O Lists.
• Prepared Scope of Work for Shutdown Systems (SDS) and Distributed Control Systems (DCS).
• Prepared datasheets for field instruments, including Flow Elements and Flow/Pressure/Temperature/Level Transmitters, as well as Smart Wireless Gateways and Wireless Field Instruments.
• Reviewed Instrument drawings, such as system block diagrams, architecture drawings, hook-ups, loop diagrams, interconnection wiring, cable/tubing routing, and equipment layouts.
• Conducted sizing calculations for Control Valves, Orifice Plates, Restriction Orifices, and PSV.
• Developed Fire & Gas Cause and Effect Matrices.
• Reviewed and incorporated vendor data.
• Conducted offshore site visits and produced Site Visit Reports, including recommendations.
September 2009
To December 2012
Instrument And Control Engineer
at SapuraKencana Petroleum Bhd
Location :
Malaysia - Lumut
• Reviewed client drawings and specifications, identifying any discrepancies, and raising STQs as necessary.
• Prepared Material Take-Offs (MTOs) and Purchase Requisitions (PRs) in accordance with project specifications.
• Prepared Technical Bid Evaluations (TBE) based on PRs and project requirements.
• Reviewed vendor design calculations, documents, and drawings, ensuring they comply with client specifications and requirements, and incorporated them into shop drawings and PDMS.
• Checked engineering drawings and worked with engineers and designers to resolve any issues.
• Prepared weight control reports (WCRs) for ship-loose items.
• Reviewed and checked 3D models generated by 3D operators, ensuring compliance with client requirements.
• Prepared Material Take-Offs (MTOs) and Purchase Requisitions (PRs) in accordance with project specifications.
• Prepared Technical Bid Evaluations (TBE) based on PRs and project requirements.
• Reviewed vendor design calculations, documents, and drawings, ensuring they comply with client specifications and requirements, and incorporated them into shop drawings and PDMS.
• Checked engineering drawings and worked with engineers and designers to resolve any issues.
• Prepared weight control reports (WCRs) for ship-loose items.
• Reviewed and checked 3D models generated by 3D operators, ensuring compliance with client requirements.
Share on Facebook
Share on Twitter
Share Via Email