Hiruduouli Mohamed, Electrical Engineer

Hiruduouli Mohamed

Electrical Engineer

Parsons International Ltd

البلد
الإمارات العربية المتحدة - دبي
التعليم
بكالوريوس, Electrical and Electronics Engineering
الخبرات
15 years, 5 أشهر

مشاركة سيرتي الذاتية

حظر المستخدم


الخبرة العملية

مجموع سنوات الخبرة :15 years, 5 أشهر

Electrical Engineer في Parsons International Ltd
  • الإمارات العربية المتحدة
  • أشغل هذه الوظيفة منذ يونيو 2019

 Responsible to handle inspection of (0.415/11kV) LV/MV cable laying, substation work including all equipment’s(Transformer, RMU, LV Panel, Feeder pillar, etc) installation and testing & commissioning, Road crossing ducts installation, Street lighting Poles & cables removal and installation, Traffic signaling work, MCC (Monitoring Control Centre) poles, duct installation and Telecommunication duct rerouting works

Project Engineer في Electrical) in Envicon Emirates
  • الإمارات العربية المتحدة
  • أشغل هذه الوظيفة منذ أبريل 2015

Prepare and coordinate design drawings to ensure compliance with project specification and BOQ.
•Preparation of Shop Drawing of LV Cable SLD, 11KV Distribution Network and Street lighting Layout
•Preparation of LV load Schedule, Street lighting Load Schedule and Substation Equipment Plan, Lighting & Power Drawing.
•Handle all electrical submittals including shop drawings, material Submittal and method statements.
•Monitor the site progress and lead the MEP construction team to ensure proper implementation on site in compliance with project schedule, quality standards, electrical codes and local regulations
•Following up with the Client for Approvals (materials, drawings and others).
•Supervision and Installation of 11kV Switchgear, LV Panel, DC Battery system, DMS Cubicle, FOC Panel and RTU in the Substation.
•Supervision, Installation of HV/LV cables, Control cables and termination in all HV/LV Equipment’s in Substation.
•Supervision, Installation of Street Lighting Poles and cables termination with luminaries and cutout.
•Ensure proper installations are done as per the approved design drawings and project specifications.
•Prepare and coordinate for closing SOR and NCR in process inspection
•Perform and implement value engineering proposals on the design, submitting cost Variation claims evaluation with Main Contractors and Finalization of Agreed Value Variation (AVV)
•Preparing and Submitting Monthly Invoice as per work completion.
•Coordinate with Testing Team for testing, commissioning and startup
•Preparing Project Closeout procedure, Operation and Maintenance Manual, As Built Drawings and handing over to the client

Project Engineer في Energy Solutions
  • الإمارات العربية المتحدة
  • يونيو 2012 إلى ديسمبر 2012
Project Engineer في Energy Solutions
  • الإمارات العربية المتحدة
  • يونيو 2012 إلى ديسمبر 2012
Electrical Engineer في Envicon Emirates
  • الإمارات العربية المتحدة
  • نوفمبر 2008 إلى مايو 2010
Electrical Engineer في Envicon Emirates, Al Ain
  • الإمارات العربية المتحدة
  • نوفمبر 2008 إلى مايو 2010
Electrical Engineer في H.K.AL SADIQ SONS CO. LTD
  • المملكة العربية السعودية
  • أبريل 2007 إلى يونيو 2008
Electrical Engineer في H.K.AL SADIQ SONS CO. LTD
  • المملكة العربية السعودية
  • أبريل 2007 إلى يونيو 2008
Electrical Engineer في GTL Limited
  • الهند
  • يونيو 2004 إلى مارس 2007
Electrical Engineer في GTL Limited
  • الهند
  • يونيو 2004 إلى مارس 2007
Projects في MEGA Distribution
  • إلى

Centre and Frozen Bakery- AGTHIA Group .Abudhabi
•D-10201 Long Term Agreement for Automation of Distribution Substation in Abu Dhabi central region(ABB Make/Replacement)- ADDC
•D-8579 Long Term Agreement for Automation of Distribution Substation in Abu Dhabi central region(Lucy Make/Refurbishment & Retrofit) - ADDC
•N-11542 - Silicon Rubber Coating of Outdoor Porcelain Insulation of OHTL Circuit Ends in Al-Ain- TRANSCO

Responsibilities :
•Prepare Shut Down Schedule for the Automation Activities.
•Receive PTW( Permit to Work ) from ADDC for the Shut Down activities.
•Supervision of Shut down activities like Removal of Old Switchgear Panel and Installation of Lucy RMU, Termination of 11KV Cables and Handover to ADDC of the Automation Project.
•Preparing of Cable tray Drawings, Cable schedule and Cable termination details.
•Preparing of Method statement for Installation of RMU, MV Switchgear, DC Battery System and RTU
•Supervision and Installation of RMU, MV Switchgear Panel, DC Battery system, DMS Cubicle and RTU.
•Conduct review meetings with Supervisor regarding the daily activities.
•Preparation and Estimation of Project which includes Costing.
•Preparation of Project Schedule which involves allocation of Manpower, Machinery, Tools & Tackles etc.
•Preparation of technical submittal (Compliance statement, drawings & Component submittal) and get the same approved by Consultant & Clients.
•Report to the Project Manager regarding the day to day activities of the project.
•Conduct weekly review meetings with Supervisors regarding the progress and the status of the weekly schedule.
•Liaise with the Main Contractors, Clients regarding the Project Schedule and discussion of the bottlenecks so as to complete the project in time.
•Conduct testing of laid cables which involves Meggering & Hi-Pot Test
•Meggering-which is done to check for the Insulation Resistance (IR) of the cable.
•Hi-Pot Test-which is done for checking the Leakage current of the cable which should be a minimum value.
•Handing over of the Site to the clients after the successful commissioning of the project.

Projects في ADSSC
  • الإمارات العربية المتحدة
  • إلى

O-1191, Construction of Sewerage Schemes Al Sadr ‘A’ And Trunk Sewer of Fala And Al-Shamka.Stage-3-

Project في SABIC
  • الهند
  • إلى

Client : Eastern Petrochemical Company, Sharq (

Project في NORTEL
  • الإمارات العربية المتحدة
  • إلى

Project : BSNL-

الخلفية التعليمية

بكالوريوس, Electrical and Electronics Engineering
  • في College of Engineering in Bharathidasan University
  • يناير 2004
الثانوية العامة أو ما يعادلها, Electrical and Electronics Engineering
  • في College of Engineering in Bharathidasan University
  • يناير 2004

Specialties & Skills

AUTOMATION
CABLEADO
CLOSING
CONSULTING
CUSTOMER RELATIONS
DISEÑO DE LA DISPOSICIÓN
GRAPHIC DESIGN
LIGHTING

اللغات

الانجليزية
متمرّس

التدريب و الشهادات

ADDC competent certificate (الشهادة)
تاريخ الدورة:
June 2013
صالحة لغاية:
June 2014