C&A Engineer
Karad International FZCO
Total des années d'expérience :9 years, 2 Mois
1. Control and Automation (C&A) Engineer:
Conceptual Design (CD) Phase; Involves in generation/modification of Design Drawing such as, Process Engineering Flow Scheme (PEFS, aka P&ID), Cause and Effect Matrix (CEM) for both Process Shutdown and Fire & Gas, Shutdown Hierarchy Overview, Process Control and IPF Narrative, Safeguarding Memorandum Narrative, Process Description Narrative, & including the Migration of Fail Safe Control Program from the old system to the new one for the purpose of IO tags and logic verification, checking of tags and logic consistency of NEW IPS logic.
Detailed Design (DD) Phase; Verification of existing instruments from the old system to the new one, verification of instruments to be replace for the compliance in lap flange process connection, static graphic review printout checking in compliance with the existing PEFS/Graphics, site survey for orifice data printed on the orifice plate, checking IPS and FGS Logic and make necessary comments based on Shutdown Heirarchy/CEM/PEFS.
Execution Phase; Leading the Loop checking team for the new signal cables. Responsible for verification of field instruments with regards to isolation of each instruments from the old system. Leading the field team during the migration of the instruments/signals from the old system to the new Emerson Delta-V DCS system for process and Honeywell Safety Manager system for Instrumented Protective Function (IPF) & Fire and Gas System (FGS). Verification and migration of pumps signal through Interposing Relay Panel (IRP) to the new system. Mark-up of the documents for as-built.
Brunei Shell Petroleum (BSP)
Seria Crude Oil Terminal (SCOT) C&A Infrastructure Project Seria, Negara Brunei Darussalam
In Partnership with Imtech Industry International/Zainal Daud Sdn. Bhd
1. Fire and Gas (F&G) Programming with Honeywell Safety Manager system including Pre-FAT held in Honeywell office in Kuwait with the EPC contractor PETROFAC.
Kuwait Oil Company (KOC)
F&G System Works (Honeywell) KUWAIT
1. F&G Instruments Continuity/Loop Check, Testing of F&G Detectors, and F&G Programming with Honeywell Safety Manager system.
Supply of Gas to New Al-Ain Cement Plant for Arkan
Instrumentation and F&G System Works (Honeywell) Al-Ain Abu Dhabi, UAE
1. ESD Programming including commissioning support using Honeywell Safety Manager system in UREA-6 Plant of QAFCO.
ESD System Works
Missaied Industrial City (MIC), Missaied, Qatar
Qatar Fertilizer Company (QAFCO)
1. Control Valves Data Sheet Generation using SPI; Panel Components drawing using Microstation; Identification of DCS, F&G, and ESD Instruments in P&ID and separation of IO for each system.
Super Absorbent Polymer (SAPCO) Project
Fluor Daniels Inc. Phils. (FDIP),
Alabang Muntinlupa, Philippines
1. Front End Engineering Design, Preparation of Drawings for Customer Approval, Revision of Drawings, As-Built Documentation.
Phase 5 Basement Level 3 Automation System & RODI Automation System
Baguio City, Philippines
Texas Instrument Philippines Inc. (TIPI),
1. Additional Programming, HMI Graphics, Process start-up, Commissioning, Systems Documentation, Operator Training.
Glass Plant Furnace Control and Monitoring System (Siemens PCS7 Control System Logic)
Mandaue City, Cebu, Philippines
San Miguel Corporation, Mandaue Glass Plant
1. System Engineering and Configuration of Siemens PCS7/S7400/WinCC at Vent System.
Geothermal Steam Production Plant Station A Vent System
Laguna, Philippines
Chevron Geothermal Philippines Holdings (CGPHI), Makban Geothermal Fields.
1. System Engineering and Configuration of Siemens PCS7/S7400/WinCC at Steam-Water Separator Station.
Geothermal Steam Prod. Separator Station Control System Upgrade
Laguna, Philippines
Chevron Geothermal Philippines Holdings (CGPHI), Makban Geothermal Fields.
1. Systems Engineering & Configuration of Siemens S7-300 and WinCC Flex HMI.
WS7 and WS9 Control Systems Upgrade Project
Chevron Geothermal Philippines Holdings (CGPHI), Tiwi Geothermal Fields. Albay Philippines
1. Systems Engineering, Configuration, Start-up & Commissioning.
2. SCADA Maintenance Support
Chevron Geothermal Philippines Holdings (CGPHI),
Makban Geothermal Fields.Laguna, Philippines
1. Systems Engineering & Configuration of Siemens S7-300 PLC and WINCC HMI.
JTA2 Boiler Control Systems
Binalbagan Sugar Company (BISCOM) Inc.
Negros Occidental, Philippines
1. Project Engineer Systems Engineering & Configuration, Start-up & Commissioning, As-Built Documentation.
Chevron Geothermal Philippines Holdings (CGPHI), Makban Geothermal Fields.
SS5 Alarm Annunciator System
Chevron Geothermal Phils.Hldgs. Inc., Laguna, Philippines
1. Responsible for Preventive and Corrective Maintenance for all instruments inside the plant.
Unilever Philippines (PRC)
Instrument Maintenance Technician
UN Avenue Manila
1. Instruments fitter.
2. Instruments configuration/calibration/termination.
3. Panel and JB wiring.
Consolidated Industrial Gases Inc. (CIGI)
70 TPD ASU / 150 TPD NLU Refurbishment Project
Sta. Rosa Laguna, Philippines
Instrument Calibration and Maintenance for the following site;
1. Air Liquide Philippines Inc., (ALPI) Philippines
2. Consolidated Industrial Gases Inc., (CIGI) Philippines
3. Interphil Laboratories Inc., (IL) Philippines
4. Johnson & Johnson Philippines
5. Procter and Gamble Philippines
6. Procter and Gamble Philippines
1. Configuration and commissioning.
2. Configuration/Testing and Wiring of Junction Box for Level Control.
3. Wiring of relay panel for controls.