PIPING ENGINEER
Total years of experience :29 years, 2 Months
Private Customers - Puerto Ordaz Venezuela.
Responsibilities.
•Conceptual Engineering
•Detail Engineering
•Design, Material Selection,
•Manufacturing, Assembly and Commissioning.
Tests of the Hydraulic Circuit, pickling, washing, passivation, in all the Carbon Steel pipe of pipe system in the complex of the rolling mill, Start-up
•Start-up Of All Mechanical Equipment, By Specifications and Manufacturer's Recommendations.
•the system in the complex of the Rolling Mill, Start-up
•Lubrication circuit tests, pickling, washing, passivation, in all the Carbon Steel pipe of the
•system in the Rolling Mill complex, Start-up
•Tests of the Compressed Air Circuit
•Compressed air compressors Ingersoll Rand, pickling, washing, passivation, in all the Carbon Steel
Project: MODERNIZATION and UPGRADING of BLAST FURNACE -Algeria Annaba.
Responsibilities.
•Test and pickling, washing, hydraulic system of the complex, under the regulations of Paul Wurth, start-up
•Modification in Site and commissioning of 05 Conveyor Belts of the Coke Loading System to the Blast Furnace.
•Commmissioning of the Hydraulic Cylinder System, Loading Docks to the Car Charger of the Coque and Agglomerated Furnace
•Commissioning and Commissioning of the Bale Load and Balancing system.
• Modification of Pipes and Manufacture of New Carbon Steel Spools.
• Penetrating Ink and Sealing Test, Hydrostatic Test.
• Commissioning of the DROPSA Centralized Fat System..
Feb.2014 - May. 2014 - INELECTRA S.AC.A / PDVSA / SINOVENSA - PROJECT REVIEWER - REVIEW OF DETAILED ENGINEERING FOR INCREASE IN PRODUCTION OF HEAVY OIL CRUDE DILUTED TO 165 MBD- INELECTRA Lechería Venezuela Headquarters.
Responsibilities.
•Rev. Of isometric design and detail engineering.
•Rev. Isometrics for manufacturing.
•Rev. Of P & ID of pipe for engineering Presented by HQCEC China.
•Implementation of an early production module of 40 MBD to crude, for DD. In the Orinoco Oil Belt Heavy and Extra Heavy.
May. 2014 / Aug.2014 - INELECTRA / PDVSA / SINOVENSA - PIPING & PIPELINES DESIGNER - MODIFICATION OF PIPELINE AND RELOCATION STATION MEASUREMENT SYSTEM OF SHIPS TO MONOBOYA - José Venezuela Petrochemical Complex.
Responsibilities.
•34 "Pipeline Bypass Design and Detail Engineering.
•Isometrics for Manufacturing.
•Relocation of Tax Measurement Station.
•Bypass in Screw Pumps to the Transfer station, old ORIMULSION system.
Sep. 2014 / Dec. 2014 / INELECTRA - PROJECT: CONVERSION OF SUGAR CENTRAL IN ETHANOL PLANT - PIPING DESIGNER: Customer PDVSA Agrícola / ODEBRECHT- Lechería Venezuela
Responsibilities.
•Design of isometrics and detailed engineering.
•Issuance of Isometrics for Workshop, manufacturing.
Jan. 2015 / Sep. 2016 - INELECTRA / PDVSA-PROJECT: Production Increase from 165 MBD to 300 MBD Heavy Diluted Oil - GENERAL ASSEMBLY SUPERVISOR IN THE CONSTRUCTION SITE OF THE PROJECT - Orinoco Oil Belt, Morichal Monagas Venezuela.
Responsibilities.
•Equipment, Bornemann screw pumps, Erection, and Start-up.
•Civil Supervision: Soil Mechanics, High resistance concrete, compaction, earth movement, Made by DELL ACQUA S.A. Sanitation and Landfill, Method and Non-Destructive Testing.
•Assembly and commissioning of oil preheating furnaces.
•Assembly and commissioning of AC / HVAC Systems, Piping in the control room.
•General Supervisor in the Expansion Project of the Flow Station. For Increase in Naphtha Injection as Diluent to Production Wells.
•Manufacturing of Spools and Installation of valve system in fluid wells
•Ink Penetrant to Solder Test and XRay, Hydrostatic Pressure Test.
•Bypass Manufacturing in Pipeline 24 "By Hot tapp, to the Rebombing System, Installation of Gate Valves, Penetrant and Hydraulic Ink Test.
•Supervision of Electrical Substation Substation for Diluent Pumping System to DD Plant.
•Assembly of SIEMENS Transformers.
•Wiring and pipes, underground.
•Supervision Special Grounding of Sales and Well.
•Supervision and Assembly of Instrumentation and Control.
•Erection of Electrostatic Salts.
•Erection of Pipe Bridge and Metallic Structure.
•Pedestals With their Anchors and Addition of Graouting in Structure Erection, Topographic Alignment.
•Erection of Heat Exchangers for Diluted Wet Crude.
•Assembly of Aero chillers for Crude Diluted Production to Pumping.
•Daily review and signature of documents for a work permit. Safe work permit (08 Subontractors.).
Sept. 2016 / Nov 2016 - REFINERY OF METANOL (METOR) Annual Maintenance Major Stop Mechanical Works of the Steam Reformer - MECHANICAL SUPERVISOR - JOSE, Petrochemical Complex Venezuela.
Responsibilities.
•Disassembly, Assembly and change of Spring Hangers,
•Change of Burner Muffles.
•Disassembly, Assembly and Cleaning of Burners.
•Change of Compensators
•Installation of New Studs of 08 mm diameter., In Burner Boxes With Tig Welding.
•Change only damage, Pigs Tails in the catalyst pipe Upper / Lower
•Change of damaged Weldolet in Feed Duct, to Catalyst Tubes
•Penetrant Ink Test.
Apr 2013 / Jul 2013 - OTEPI CONSULTORES S.A. - SUPERVISOR DESIGNERS - Project: SANTA ROSA Natural Gas Compressor Plant - Anaco Venezuela.
Responsibilities.
•Detailed engineering Review issued by the JANTESA company for 2006 for PDVSA-SIEMENS LP gas compression station of the Old "SANTA ROSA" Project.
•Design for Construction of new isometrics PDVSA ODEBRETH, Project Re-launch
•Supervision in charge of the 03 pipeline designers of the project, reporting to the Technical Manager.
•Visit on Site of the Project and Modifications.
EDIPERCA Contractors S.A.-
- Project: Hot Reversible Laminator - Ahwaz
& PIPELINES - ENGINEERING AND PROCESS DIVISION - Matanzas Venezuela.
Responsibilities.
•Supervision of work in main plant shutdowns in steam reformers and preheating furnaces, Kellogg type, change of walls and refractory bricks, burners, insulating covers, change of catalysts and catalyst tubes in two special alloys.
•Maintenance Rotating equipment, compressors, centrifugal pumps, reciprocating compressors.
•Supervision of Contractors during maintenance work.
•Selection and comparison of steels, special alloys (similar to steel used KEY STEEL)
•Nonferrous metals. Gear calculation, international system knowledge of DIN and Witworth threads.
•Inspection of welding Ink and XRay,
•Inspection of Hydrostatic Test Pipe.
•Design of tanks and containers, installation and assembly work on hot briquette machines, by Maschinenfabrik Köppern Germany,
•Design and modifications, original sliding gate valves Supplied by TAPCO USA.
•Design of the special expansion joint inter reactors of the connection system. Modification of the original by integrated sealing system.
•Design and Assembly of Internal Coated Pipes with Special Refractory Type Riser and Accessories • Design of the special expansion joint inter reactors of the connection system. Modification of the original by integrated sealing system.
•Design and Assembly of Special Refractory Coated Pipes, Riser Type and Accessories.
OF DOCUMENTATION CONTROL AND CENTRAL PROJECT ARCHIVE - DEPARTMENT OF ENGINEERING - Matanzas Venezuela.
Responsibilities.
•Delivery of the Assembly packages to the Construction Manager, for the assembly to HITACHI Plant
Puerto Ordaz Venezuela.
Responsibilities.
•Centralized Lubrication Technician By DELIMON Fluhme, Supply and Assembly, Field Assistance.
•Sale of the DELIMON lubrication project to hot pipe rolling SIDOR Year 1995
•Belt Conveyors (Type) FLEXOWELL
PLANTS - Matanzas Venezuela.
charge of the Update and Modernization of Instrumentation and Distributed Control of the MIDREX I Plant. from 1993 to 1995.
•Plant of Direct Reduction PLANTS MIDREX SIDOR I and MIDREX SIDOR II - Mechanics and Instrumentation: Drawings and Design in AUTOCAD For Local and Foreign Workshops Manufacturing.
•AREX (sbd) Project, direct collaborator in the creation of this new technology of direct reduction Selfreformation. For, TECHNICAL CENTER OF SIDOR Year 1990.
•Design and Change of Materials and Updating of A304 to High Alumina Ceramic in the interns of Reformed Gas Collector connections and
PIPES - MANAGEMENT MAINTENANCE ENGINEERING - Matanzas Venezuela.
Responsabilidades.
•Supervision of Hard Surface Recovery (Eutectic Castolin) for Welded Contribution Processes,
•Design and Supervision, Assembly and start-up of small turnkey projects.
•Maintenance works briquette making machines,
•Design and Modifications. Modified and assembly parts of the briquette machine, Cheek Plates, Feeder Screw, Modified Segments in M3 Alloy.
•Rotary Machines: Pumps, Centrifugal and Reciprocating Compressors.
•Design work: civil foundations, metal structures, stairs, walkways, transfer ducts, conveyor belts, stairs, handrails, grilles, extensions, joints, springs, P & D, isometrics, waterproof concrete, geotextile membrane, reinforced structure, Embedded steel,
•Modification in Centrifugal Iron Mills,
•Modification of the Chemical Dosing System by shock of Water ejectors.
•Hydraulic Brakes for Stackers and Reclaimers,
•Supervision of contractors, calculation and cost control.
•Inspection and Reconstruction of Ball Valves 4 ", 6", 8 ", Internally with Stellite by Electrosoldering.
•Change in Metallurgy of Grills and Cyclones of A304
Reverse Osmosis Plant, Production of 1.000.000 m3 / Desalinated Water per Day
Coordination and Programming for Contractors in Manufacturing and Assembly in accordance with the DANIELI Standard.
•Review of drawings and isometrics for manufacturing workshop.
•Supervision of manufacturing of Spools, Carbon Steel and Stainless Steel, Test by Ink and Xray.
•Hydrostatic Test on Site after Assembly.
•Supervision of Assembly and Modifications in Site.
•Assembly and commissioning of the Sand and Anthracite Filtration System of the rolling mill complex
•Start-up of the recirculated water and cream collection system in the treatment plant.
•Put in Service of the Recirculated Water Treatment Plant.
•Management of Sub Contractors of Assembly in the Industrial Complex
•Weekly report of the headquarters of DANIELI Italy and As build Drawings..
Fisher &
Graduate in Mechanical Engineer
-Year