EHS Lead engineer
Sadara Chemicals Company
Total years of experience :20 years, 1 Months
To develop EHS Plan, JSA, Emergency Evacuation Plans for the major Turnaround.
To develop Project specific HSE Plan, QRA, TRA, JSA, HIRA, and EERP. Preparation and reviews of HSE Reports & discuss with Top Management for changes if any. Imparting training & education to all categories of employees in safety procedures. To comply with the safety laws, norms & standards, regular testing & monitoring of the working environment, plants, Acceptance of direct responsibility in the matter of safety Programmers’. Active participation in safety & Housekeeping committees, Investigation of all accidents & injury reports. To conduct internal safety audits within company to identify whether the company policies & procedures are complying with national/ International regulations and to provide necessary recorded and documented findings and information’s to higher management for necessary reviews To promptly investigation regarding the cause & identify accident prone workers, Carrying out monthly/ weekly safety meetings, Full knowledge of site HSE regulations & specifications, Monitoring the application of HSE plan on site, Verifying the emergency evacuation plan, Ensure that risk assessments for activities with a high potential for loss are completed before work commences, Safety induction for the new employee & different safety training courses for the employees, Inspect and monitor the place of work on a continuous basis ensuring that all procedures, safe working practices, authorization system or permit to work systems are being carried out properly, Assist in organizing and carrying our emergency safety exercises and training, Assist with reporting and investigation of accidents, incidents and near misses and ensure that all accidents and incidents and near -misses are reported, Organizing safety tool box which guaranty a good safety attitude for all work force, Making all daily reports, waste & hazards disposal reports, monthly reports, weekly statistics,
Monitoring day to day activities, mock drills, training's, risk assessments, periodical report, Minutes of meetings, PPE. To develop Project HSE Plan, TRA, JSA, FERP, and EERP. Participating & groundwork of HSE Reports & discuss and reviews with Top Management for changes if any Review and approvals of Method of statements & Tasks related risk Assessment and approval of contractor’s safety personnel, Carry out HSE tour on work site and produce reports, To Carry out daily HSE inspections related to safety, Asses and monitor the risk assessment and control measures submitted by the contractors are sufficient to bring the risks to ALARP levels, Inspection of the equipment’s and machines used by at site to ensure the compliance to Client’s Road Safety requirements, Inspect & ensure that wherever required, the permits are duly signed, Participated in emergency rescue from different environments, Involved in accident / incident investigation and recommendations for corrective actions and follow up, Conduct monthly audits on the contractors to ensure compliance of site safety rules, Conduct regular inspections of chemical storage, MSDS availability, disposal and storage of contaminated soil, Waste disposal and recycling of wastes, and ensure that spill kits are available in the storage areas. To ensure compliance with National/ International rules and regulations, Ensures that contractors comply with site rules relating to health and hygiene issues relating to provisions for the employees of the contractors, Carry out & lead contractors EHS meetings, Participate in contractors HSE meetings and ensure the implementation of TBT Meetings. Periodic discussions with senior Management for the outcomes of HSE Issues.
1. Jan 2013 to till date.
FALCOR Engineering & Contracting Services LLC, Abu Dhabi, UAE as Sr. HSE Engineer
Client: Gasco.
Project: Sour Water Treatment Facilities.
Significant Contributions
Imparting training & education to all categories of employees in safety procedures & norms.
To comply with the safety laws, norms & standards, regular testing & monitoring of the working environment, plants etc, Acceptance of direct responsibility in the matter of safety Programmers'.
Conducting Tool Box talk regularly to the workers to assure safe working practices, Active participation in safety & House keeping committees, Investigation of all accidents & preparation of injury reports.
To promptly investigation regarding the cause & identify accident prone workers, Carrying out monthly safety meetings, Full knowledge of site HSE regulations & specifications, Monitoring the application of HSE plan on site, Verifying the emergency evacuation plan, Ensure that risk assessments for activities with a high potential for loss are completed before work commences, Safety induction for the new employee & different safety training courses for the employees, Inspect and monitor the place of work on a continuous basis ensuring that all procedures, safe working practices, authorization system or permit to work systems are being carried out properly, Assist in organizing and carrying our emergency safety exercises and training, Assist with reporting and investigation of accidents, incidents and near misses and ensure that all accidents and incidents and near -misses are reported, Organizing safety tool box which guaranty a good safety attitude for all work force, Making all daily reports, waste & hazards disposal reports, monthly reports, weekly statistics, LPI score reports (Loss Prevention Inspection report), And monthly checklist report for all equipment's, Inspecting all equipment's, hand tools and other facilities in order to classify its safety statues, Inspecting the work place to make sure that all the permit's requirements are provided prior to the starting of the work (safety precautions, Emergency procedures .etc)
2. Feb 2011 to Feb 2012.
Hyundai Engineering & Construction, Abu Dhabi, UAE as HSE Supervisor
Client: Gasco.
Project: Integrated Gas Development Project-5.
Significant Contributions
Review and approvals of Method of statements & Tasks related risk assessments, Assessment and approval of contractor's safety personnel, Carry out HSE tour on work site and produce reports, Carry out daily HSE inspections related to safety, Asses and monitor the risk assessment and control measures submitted by the contractors are sufficient to bring the risks to ALARP levels, Inspection of the equipments and machines used by at site to ensure the compliance to Client's Road Safety requirements, Inspect & ensure that wherever required, the permits are duly signed, Participated in emergency rescue from different environments, Involved in accident / incident investigation and recommendations for corrective actions and follow up, Conduct monthly audits on the contractors to ensure compliance of site safety rules, Conduct regular inspections of chemical storage, MSDS availability, disposal and storage of contaminated soil, Waste disposal and recycling of wastes, and ensure that spill kits are available in the storage areas. To ensure compliance with EAD rules and regulations, Ensures that contractors comply with emission control and ambient noise in the work requirement and monitor the same as per the requirements of EAD rules, Ensures that contractors comply with site rules relating to health and hygiene issues relating to provisions for the employees of the contractors, Carry out & lead contractors EHS meetings, Participate in contractors HSE meetings and ensure the implementation of Tool Box Meetings.
3. Dec 2008 to Aug 2009.
Gold Star Engineering & Construction, Qatar as HSE Supervisor
Client: Qatar Gas.
Project: Rass Laffan Refinery Project.
Significant Contributions
Liaison with safety Manager to ensure Company meets/exceeds statutory requirements on matters of Health & Safety, Liaison with external organization to ensure Company is at the forefront of advancements in Health & Safety initiatives/standards, Promote and maintain a continuous improvement Safety culture, Complete and deliver all levels of Health & Safety & Environmental awareness training, Preparation and Submission of daily, weekly and monthly reports, Preparation of accidents report and rectification of occupational and health hazards of employees, Compiling the Safety Reports prepared by the Safety Officers for reporting in Company's project meeting. And monthly checklist report for all equipment's, Inspecting all equipment's, hand tools and other facilities in order to classify its safety statues, Inspecting the work place to make sure that all the permit's requirements are provided prior to the starting of the work
4. Oct 2007 to Oct 2008.
Daewoo Engineering & Construction, Qatar as Safety Officer
Client: \{G.S. E&C\} Qatar Gas.
Project: Rass Laffan Refinery Project.
Significant Contributions
Advise Line Management on HSE matters, Monitoring the implementation of HSE procedures, Monitoring the implementation of HSE plan, Preparing weekly and monthly reports, Carrying out Hazard Analysis and prepare Job Safety Plan, Coordinating HSE training and maintaining records, Conducting Accident/Incident Investigation, Review toolbox talks, Conducting Emergency mock drills, Conducting HSE meetings with supervisors & workers, Taking part in HSE meetings at corporate and project levels, Work as a technical member of internal HSE audit teams, Assist HSE Manager to develop HSE management system, Carry out inspections to improve HSE performance, Encourage employees to follow HSE procedures / standards, Provide feedback to management.
5. Jan 2006 to Aug 2007.
S.K. Engineering & Construction, Kuwait as Safety Officer
Client: Kuwait Oil Company.
Project: KOC - FMP Project.
Significant Contributions: Implementation of Client Safety Rules and Coordinates with Project Management in all matters of Safety, Health & Environment, Preparation of Schedule as per Planned Activities for the Month. Ensure Safety procedures in the work areas. Weekly Patrolling of Site with Client & Main Contractor and Attend Client/Main Contractor Meetings related to Safety, Health & Environment. The Review & Evaluate Lifting Plans for Heavy Lift Equipments. Creating Safe Working Practices for Underground working, Deep Excavation and Confined space etc. Creating Safe Working Practices for working in Chemical Storage areas e.g. Sulphur Plant, Hydrogen Plant. Weekly Safety Tool Box Meeting for workers and programming on Fire & Safety for workers in each month. Ex, Confined Space entry, Fire Extinguisher operation, H2S, Evacuation plan, Work on Heights etc. Inspection of camp safety and mess hall hygiene.
6. Jan 1995 to Jan 2000.
Symand Electrical & Engineering, India as Safety Supervisor/Instructor
Client: Indian Railway.
Project: Delhi Metro Project.
Significant Contributions: Responsible for implementing, administering of all aspects of accident prevention, security, fire protection and control. In the project to construct, commission, and then operate on High voltages overhead lines MCC, MCV & Switch gears include permit to work auditing, inputting safety advice into risk assessments site auditing, Training local labors heading emergence response attending progress meetings advising management on safety requirements and improving safety awareness.
• High School P.C.M. from C.B.S.E. Board India. Other Relevant Details: A class Athlete in 400 to 20,000 mts. race, Player of T.T., Volly ball, Hockey, Good debater, Good singer, School Captain Boys having awards & appreciation Certificates.
• B. Tech. in Electrical Engineering from Devnagari Polytechnic, Meerut India.