Mirza Azmathullah Baig

• Conducted quality control inspections (QCP) for electrical systems, equipment, and materials throughout all project
phases.
• Attend all necessary inspections as identified in the approved Inspection and Test Plan (ITP)
• Ensured all LV/MV electrical installations, testing, and commissioning activities complied with project specifications and
international standards.
• Attend all Inspections Involved in Cable installation & Cable Testings (Drum testing, Pulling, laying, arrangement, testing,
termination, torque).
• Attend all Inspections Involved in Motor Solo Run Test (Vibration Test, Speed Test, Temperature, Voltage, and Current).
• Implementing coverage of proper installation, Conduit & Cable tray, wiring and cable laying, cladding, termination,
witnessing of insulation resistance test and Hi-pot test.
• Inspected installation of Power panel, Local Control panel, Distribution panel, Dry Type Transformers, Switchgears,
transformers.
• Review the calibration status of any test equipment being utilized on the project ensuring the equipment is within
calibration prior to use.
• Inspected installation of Electrical & Communication Duct banks, cable laying cable raceways & responsible for splicing of
LV & MV cables.
• Conducted loop checks and inspections for field instrumentation (pressure, temperature, flow, etc.).
• Installation, Inspections and Loop Check for Pressure Transmitter, Temperature Transmitter, Differential Pressure
transmitter, Ultrasonic Flow transmitter, MOV Actuator and TOC Analyzer.
• Installation & Inspections of Impulse Hook-up Tubing and Pressure/Leak Test for Differential Pressure Transmitter.
• Execute the assigned job activities as per schedule.
• Inspect the production quality to establish if the client requirements are being achieved.
• Identify and report defects, deviations or non-conformities reports (NCR) in electrical systems or components.
• Conduct meeting with contractors construction personnel to find out the reasons for the delays and resolve issues.
• Prepare internal punch list and coordinate with the construction prior for inspection.
• Record and document any and all deviations from the Project Quality Program and the Company Integrated Management
System (IMS).
• Ensure the effective coordination with the client related to inspection, testing activities and documentation.
• Perform proactive surveillance inspection to minimize or avoid discrepancy and non-conformance rectification cost and
time.
• Prepare internal punch list and coordinate with the construction prior for inspection.
• Coordinate and assist construction to resolve any encountered problems related to inspection and testing activities to
meet schedule and avoid any delay of activities
• Maintain good record keeping of activities carried out and inspection reports, surveillance reports, etc.

• Experienced in Quality Assurance & Quality Control (QA/QC) for electrical works, ensuring compliance with
standards and project specifications.
• Prepared and implemented Quality Control Procedures (QCP), Inspection Test Plans (ITP), and Inspection Test Reports
(ITR) to maintain quality assurance.
• Check material submittals, test reports, and certifications for compliance with project requirements and are free from
damage or defects
• Performs comprehensive pre-commissioning and commissioning tests on LV motors including IR, winding resistance,
phase balance, and no-load run tests.
• Witnessing LV/MV motor testing IR, PI, winding resistance, motor rotation, and functional run tests.
• Witnessing LV/MV cable testing including insulation resistance, continuity, phase identification, sheath testing, VLF/Hi
Pot methods to assess insulation health and termination inspection.
• Witnessing LV breaker testing including insulation resistance, contact resistance, and functional interlock checks.
• Witnessing MV switchgear testing including IR, contact resistance, timing test, functional checks, and interlock
verification.
• Verifies MV switchgear protection relay settings and operational logic prior to commissioning.
• witnessing CT testing including ratio, polarity, excitation, IR, and secondary continuity tests.
• Ensures CT accuracy and reliability for metering and protection applications.
• Witnessing PT/VT testing such as insulation resistance, ratio verification, polarity checks, and functional tests.
• Conducts point-to-point wiring checks for MCC panels and control circuits.
• Performs loop checks for instrumentation including PT, TT, DPT, MOV actuators, and analyzers.
• Ensures proper termination, polarity, and signal integrity for all instrumentation loops.
• Reviews and validates all test reports, ensuring compliance with project specifications.
• Ensures calibration validity and traceability of all testing instruments used on site.
• Coordinates with commissioning teams to resolve discrepancies and retest as required.
• Ensures all testing activities follow approved ITPs, method statements, and QA/QC procedures.
• Maintains strict adherence to HSE requirements during testing and energization activities.
• Prepares detailed inspection and testing documentation for client/consultant approval.
• Supports energization sequences by ensuring all equipment passes mandatory pre-energization tests.
• Ensures all test results are accurately recorded, reviewed, and archived for final handover.
• Contributes to achieving zero-incident commissioning by ensuring all equipment meets safety and performance
standards.

• Ensured all electrical installations, testing, and commissioning activities for Low, Medium systems were executed per
project specifications, industry standards, and client requirements.
• Conducted inspections of materials and equipment against approved submittals, test certificates, and third-party
inspection reports.
• Verified compliance of electrical devices and systems with IEC, NEC, NEMA standards and project-specific
specifications.
• Prepared and implemented Quality Control Procedures (QCP), Inspection Test Plans (ITP), and Inspection Test Reports
(ITR) to maintain quality assurance.
• Maintain good record keeping of activities carried out and inspection reports, surveillance reports, etc.
• Ensure all electrical work adheres to national and international standards NEC, NEMA, IEC.
• Inspection of the Installation of power panel, Motors, distribution panel, Switchgears, dry type transformers.
• Inspection of the installation of electrical and communication duct banks, cable laying and cable raceways as well as
responsible for splicing of LV & MV cables.
• Attend all Inspections Involved in Cable installation & Cable Testings (Drum testing, Pulling, laying, arrangement,
testing, termination, torque).
• Witnessed insulation resistance & continuity test of LV cables and noted the value according to the standards.
• Witness and verify continuity, megger, HI-POT testing for medium voltage and high voltage cables, and Phases.
• Witnessing winding resistance test and insulation resistance test for motor, and Hipot test for MV motor.
• Verifying Point to point testing for LV/MV Control panels, Switchgears, and interconnection.
• Witnessing CT/PT testing, Ratio test, polarity test and Metering Test.
• Witnessing Contact Resistance Measurement test, Hi Pot Test, Timing test for Switchgear and Trip test for Breakers
• Inspection for Bus installation, torquing, Hipot, and contact resistance tests.
• Witnessing TAN -Delta, Partial Discharge Test for Motor and Cables.
• Witnessing Protection relay testing for Bus bar Differential Relay, and Motor Protection relay
• Verify the functionality of electrical systems, including grounding, bonding, and circuit integrity.
• Verifying all Inspections Involved in Motor Solo Run Test (Vibration Test, Speed Test, Temperature, Voltage, and
Current).
• Witnessing electrical tests using tools such as multimeters, megohmmeters, and infrared cameras, OMICRON, MOM,
Circuit breaker analyser, Hi-Pot tester, Partial Discharge Tester.
• Monitored calibration status of testing instruments to ensure traceability and accuracy.
• Oversaw installation, inspection, and loop checks for field instruments including:
• Prepare detailed inspection reports, including findings, non-conformities, and recommendations.
• Reviewed and validated test reports, inspection checklists, red-marked drawings, and as-built documentation.
• Raised Non-Conformance Reports (NCRs) and followed up on corrective actions.
• Ensure the effective coordination with the client related to inspection, testing activities and documentation.
• Liaised with clients and third-party inspectors for work inspections, approvals, and documentation handover.
• Participated in punch list activities, pre-commissioning, and final handover processes.
• Ensured strict implementation of HSE practices, especially in hazardous and classified areas.

• Led installation and commissioning of electrical systems including transformers, switchgear (LV/MV), MCCs, motors,
lighting, and grounding systems.
• Installation of LV/MV circuit breakers, isolators, and switchgear for the safe control and protection of electrical circuits.
• Installing LV/MV cables, including the necessary cable trays, conduits, and underground ducts to manage large power
transmission, and proper cable termination at both ends.
• Installation of MV busbars and busducts to interconnect transformers, switchgear, and other substation equipment.
• Installation of MV transformers 4.16KV/13.8KV for stepping down voltage levels from high to medium and then
distributing to end users.
• Installing metering devices such as energy meters, voltage and current transducers for monitoring system
performance.
• Installing emergency and exit lighting, fire alarm systems, and ensuring proper routing for fire suppression systems.
• Installation and commissioning of uninterruptible power supply systems for backup power to critical loads.
• Configuring advanced protection relays, including distance protection, overcurrent, and differential protection, to
ensure fault-free operation.
• Installing emergency and exit lighting, fire alarm systems, and ensuring proper routing for fire suppression systems.
• Installing effective earthing systems to protect both equipment and personnel from electrical hazards.
• Performing inspections and preliminary testing (e.g., visual inspections, cable continuity checks, insulation resistance
testing) before energizing the system.
• Conducting high-voltage testing (e.g., Hi-Pot) to ensure cables, transformers, and switchgear meet required insulation
standards.
• Conducting functional tests, integration of control systems, coordination of protection relays, and overall system
performance testing.
• Preparing comprehensive operation and maintenance manuals for the end-users, outlining system specifications,
operating procedures, and troubleshooting guidelines.
• Preparing detailed commissioning reports that document test results, system performance, and any issues identified
during commissioning.
• Providing final as-built drawings that detail the exact installation, including routing of cables, equipment locations,
and system configurations.

• Supervised, coordinated, and executed all substation electrical works as per project specifications and safety
standards.
• Oversaw installation, inspection, testing, and commissioning of LV/MV systems in coordination with MEP and civil
teams.
• Reviewed and interpreted electrical drawings, BOQs, schematics, and technical specifications for accurate site
execution.
• Supervised installation of power distribution systems, lighting, earthing, LV panels, switchgear, and cable tray
networks.
• Performed circuit planning, industrial load calculations, and HT/LT/ATS/PFI panel design and testing.
• Prepared ATS interlocking, conducted panel testing, and ensured proper panel structuring and wiring.
• Executed site installation, troubleshooting, equipment relocation, and corrective modifications as required.
• Monitored subcontractor activities to ensure compliance with NEC, IEC, and NEMA standards.
• Conducted routine inspections, IR/continuity/HV testing, and ensured proper commissioning of electrical systems.
• Maintained daily reports, inspection logs, material submittals, and resolved site issues to support smooth project
delivery.

• Demonstrated expertise in the complete testing and commissioning of Low Voltage (LV) and Medium Voltage (MV)
motors for industrial and oil & gas application.
• Supervise installation of electrical systems including power distribution, lighting, earthing, LV panels, switchgear, and
cable tray systems.
• Performing pre-commissioning inspections, electrical testing, and functional verification to ensure safe, reliable, and
compliant motor operation.
• Proficient in conducting insulation resistance (IR) tests, continuity checks, polarization index (PI) measurements, and
high-voltage withstand tests for MV motors.
• Experienced in verifying motor winding health, phase balance, and proper rotation direction prior to energization.
• Competent in performing grounding system checks, protection relay verification, and interlock testing to ensure safe
motor starting and stopping sequences.
• Skilled in executing no-load and load performance tests, monitoring current, vibration, temperature rise, and
alignment conditions to confirm mechanical and electrical integrity.
• Adept at coordinating with MCC, VFD, and starter panel commissioning teams to validate control logic, feedback
signals, and system integration.
• performing essential transformer maintenance activities, including insulation resistance (IR) testing, winding resistance
verification, and grounding integrity checks through earth pit testing.
• Transformer oil filtration and conducting breakdown voltage (BDV) testing to ensure proper dielectric strength,
reliability, and compliance with industry standards.

• Led installation and commissioning of electrical systems including transformers, switchgear (LV/MV), MCCs, motors,
lighting, bus ducts, auxiliary power distribution networks and grounding systems
• Plan, coordinate, and execute all site electrical activities in line with project schedules.
• Supervise installation of electrical systems including power distribution, lighting, earthing, LV panels, switchgear, and
cable tray systems.
• Supervised pre-commissioning tests: insulation resistance (IR), polarization index (PI), Tan Delta, CT/PT polarity, relay
logic verification, and cable megger.
• Managed commissioning of excitation systems, protection relays, and synchronization panels, ensuring grid compliance
and operational readiness.
• Monitor subcontractors work to ensure compliance with approved drawings and standards NEC/IEC/NEMA.
• Conduct routine inspections and quality checks of electrical installations.
• Ensure proper testing and commissioning of electrical systems (IR, continuity, high voltage tests.
• Maintain and update daily work reports, inspection logs, and site progress records.
• Assist in preparing material submittals, method statements, and inspection requests.
• Identify and resolve any site issues or deviations related to electrical scope.
• Ensure that all works are carried out in accordance with HSE standards and site safety procedures.
• Conducted functional testing and loop checks for control panels, SCADA interfaces.
• Ensured full QA/QC compliance with IEC, NEC, ISA, and client-specific standards throughout installation and
commissioning phases.
• Coordinated with OEMs, EPC contractors, and client representatives for design validation, punch list resolution, and final
handover.
• Delivered zero-defect commissioning with complete documentation, red-line markups, and client sign-off.