mep supervisor
Genetco FMES LLC
Total years of experience :17 years, 2 Months
Planning & managing the work force as per the project schedule.
Before going start any work fully studying needed drawings like lighting, power, drawings, fire alarm, I.T drawings, schematic drawings, Single line diagram & Co- ordination drawing.
Materials quantity take-off from the approved shop drawing as required by the projects.
Ensure safe working environment by following site HSE regulations including housekeeping.
Man power handling / distributing as required of site works.
Provide technical guidance to the team on installation of all electrical system.
Monitor and inspect the electrical works before slab concreting as per the approved drawings.
Coordinate work with the other supervisor's contractors and subcontractors of a daily basis to minimize work interference.
Meggering and continuity test with client inspector, material receivable inspections, Raise Request for Inspection, Prepare as built drawings.
Coordinating and attending site inspections with Q.C & Consultants.
Guest Room Management Systems and Smart Home Control System.
Low Current System like Building Management Systems, Lightning Control Panel, CCTV & Data and Access Control Systems etc.
PVC and GI conduit laying for lighting, small power system, Central Battery system, fire alarm system, PA system, BMS system, CCTV system, telecommunication and data system.
Supervising the Installation of Cable Tray and Trucking, Bus bar & Lightning protection system.
Perform Cable pulling, glanding and termination of MDB, SMDB, panels in accordance with the drawing and termination schedule.
Responsible for sending the daily progress report and update to senior authorities.
Helping to Draftsman to preparing drawing, load schedule & load calculation.
Proficient in computer systems, Ms Office, Internet, and AutoCAD.
Making sure that safe working practices are maintained at all times
Supervising and assisting team members in Troubleshooting, maintenance and operation of most advance building services equipment’s, L.V. distribution, lighting, HVAC, Fire fighting system, fire detection and Plumbing system.
Schedule planning for Annual, Half, Quarterly, Monthly and daily operation of PPM activities (with checklist).
Leading the many teams of MEP technicians in the field, providing them guidance and technical support to carry out preventive and corrective maintenance of all building services equipment’s, Mechanical (HVAC), Electrical & Plumbing as per work instructions with Schedule.
Review all work orders before and after completion.
Supervision on trouble Shooting of Mechanical (HVAC). Electrical. And Plumbing Faults.
Maintenance and checking and trouble shooting of electrical panels, switchgears & .
Perform Routine tour of pump room, and all related Fire Fighting Pumps, diesel pump, Electrical pump, Jockey Pump, Transfer pump, Booster Pump and Fire Hose Reels
Maintenance & trouble shooting of pumps (transfer, booster & Fire fighting pumps) with control.
Follow the Plan Preventative Maintenance Work as per Schedule and corrective maintenance of mechanical (HVAC), electrical & plumbing systems as per complaint.
Inspect electrical systems, equipment, and components to identify hazards, defects, and the need for adjustment or repair.
Responding appropriately to emergencies or urgent issues as they arise.
Maintenance of Split, Duct able, Package Unit, FCU, AHU, FAHU, Chillier & Heat Exchanger.
Installation and maintenance of all types’ pressure vessel tank and pressure switch.
Monitoring the quality of work to ensure that it meets the standards and specifications.
Assist facility Executive & facility Manager in maintaining auditable and none auditable records.
Updating the staff's details, vacation plans medical leaves & Checking staffs overall activities.
Planning & managing the work force as per the project schedule.
Dealing with any technical issues that may arise.
Making sure that safe working practices are maintained at all times
Inspect electrical systems, equipment, and components to identify hazards, defects, and the need for adjustment or repair
All over Electric wiring, Fire wring, Fixing lighting system & Maintenance.
Plans, Schedules, Assigns, Supervises and participates in the work of unskilled and skilled employees engaged in the installation of electrical system
Assembly, installation, testing and maintenance of electrical utilities
Before going start any work fully studying all type of drawings like lighting, power. drawings, fire alarm, I.T drawings, schematic drawings of power
Materials quantity take-off from the drawing as required by the projects.
Co- ordination with other departments.
Man power handling / distributing as required of site.
Provide technical guidance to the team on installation of electrical system.
Test Electrical systems, circuits in electrical wiring, equipment and light fixtures using devices such as Multi meter & Megger
Cable Tray and Trucking Installation as per drawing
Place conduit inside designated partition walls or other concealed areas and pull insulated wires or cables through the conduit to complete circuit between boxes.
Perform Cable pulling, glanding and termination of MDB, SMDB, panels in accordance with the drawing and termination schedule
Prepare and maintain reports and records related to work activities
Planning & managing the work force as per the project schedule.
Before going start any work fully studying all type of drawings like lighting, power, drawings, fire alarm, I.T drawings, schematic drawings, Single line diagram & Co- ordination drawing.
Materials quantity take-off from the approved shop drawing as required by the projects.
Ensure safe working environment by following site HSE regulations including housekeeping.
Man power handling / distributing as required of site works.
Provide technical guidance to the team on installation of all electrical system.
Monitor and inspect the electrical works before slab concreting as per the approved drawings.
Coordinate work with the other supervisor's contractors and subcontractors of a daily basis to minimize work interference.
Meggering and continuity test with client inspector, material receivable inspections, Raise Request for Inspection, Prepare as built drawings.
Preparation of Structural Building Plans, Sections, Elevations and Detailed Drawing of Columns, Beams and Slabs
Work closely with other Engineers to ensure a coordinated design
Ability to handle crunch situations and adapt to any environment.
Assisting in drawing problem by recommending solutions.
Passed with A Grade & Attested done by the U.A.E Embassy
Passed with 1st div
Passed with 1st div